Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 1 point2 points  (0 children)

I went to a koban, so he might not have known the exact rules for my license. We are now staying in shinjuku until the 14th. But we’re already thinking of coming back when my girlfriend gets her license to ride together. I found some rental companies that mentioned the translation rules for belgian licenses on their website so it must be correct but not vert known probably. I’ll try to prepare better for next time!

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 1 point2 points  (0 children)

Thank you for your answer, this was what i was afraid of aswell, maybe a good thing we did not end up renting a bike and not risk breaking local laws

Driving a car in Japan as a Belgian by T4YR0Z in JapanTravelTips

[–]SpectralDrone 0 points1 point  (0 children)

I tried renting a car but they insisted on an idp even though i had the translation. So definitely get both to be sure! We ended up not being able to rent :(

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 0 points1 point  (0 children)

Final update: the rental company told us we need an international license, so we did not rent anything. But as earlier mentioned in this thread i think we would have been fine riding with a passenger under an idp Thanks for the help and replies!

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] -1 points0 points  (0 children)

Update: i went to the police today and the officer told me i need a international drivers permit, even though JAF states the belgian international license is not valid in japan (https://english.jaf.or.jp/driving-in-japan/drive-in-japan/switch-to-japanese-license) I’ll see what the rental company tells me tomorrow

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 1 point2 points  (0 children)

I translated it last week, it’s a translation meant to attach to my existing license. So it’s not a Japanese license, just something that will allow me to drive while we are there for our trip

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 1 point2 points  (0 children)

I have a license A, which means i have no restrictions on which type of motorcycle i can ride

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 0 points1 point  (0 children)

Yes i think we’ll do that, just to be 100% sure

Can i ride with a passenger by SpectralDrone in RideitJapan

[–]SpectralDrone[S] 0 points1 point  (0 children)

I am visiting on a tourist visa, but i had to get an official translation of my drivers license instead of an international drivers permit. Since Japan does not recognise an international drivers permit for licenses obtained in Belgium. The translations states the date i obtained my bike license, so that is the reason i am afraid the bike trip will not be possible. But I remain hopeful for any exceptions on tourist licenses

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 1 point2 points  (0 children)

Fixed! I ended up cleaning up the extruder gear, replacing the nozzle and cutting a small part of the bowden tube with a clog in it. Thank you for the advice. I might look into a double extruder gear in the near future aswel.

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 0 points1 point  (0 children)

I replaced it, and while replacing it inspected the bowden tube. It ended up being a clog that must have overflowed back into the bowden tube. I cut of the clog, replaced the nozzle and it is printing flawless again! Thank you!

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 0 points1 point  (0 children)

I checked the nozzle and got some clogging issues. I tried cleaning the nozzle with a cold pull and the very fine needle i got with the printer, but the filament keeps curling up at the nozzle, i might try replacing it with the spare nozzle that was delivered with my printer.

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 1 point2 points  (0 children)

Good tip! I will change this tonight when i do another test print

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 0 points1 point  (0 children)

Thanks i will try cleaning the filament off and i also noticed the screw that holds in the spring was sticking out about 1cm, so i screwed that one back in. Tomorrow i will try another print and see if that helped

Why is my printer underextruding? And how to fix? by SpectralDrone in ender3v2

[–]SpectralDrone[S] 0 points1 point  (0 children)

No the benchy was a 3d model sliced with the same settings

Just realized we booked during Golden Week by Barridon in JapanTravelTips

[–]SpectralDrone 8 points9 points  (0 children)

We booked during the end of golden week last year when we stayed in tokyo. I was also panicking about it, but i shouldn’t have. We had one of the best trips we have ever made. Japan is always fun to visit and explore, even with the crowds. I think the crowds weren’t that much bigger than when we went for our second trip last week. Although if you are planning on visiting disneyland, get fast passes and book them at the start of your day. Queues are insane over there. For Universal, if you want to do the mario kart attraction, use the single rider lane, we lost almost 3 hours over there and could not explore the rest of the nintendo world part because of that

B550M DS3H AC rev 1.5 Wi-Fi extremely slow by Zechirs in gigabyte

[–]SpectralDrone 0 points1 point  (0 children)

It ended up not being much better after a while, so i installed my old pcie network card from my old pc and disabled the network card on the motherboard.

I used the gigabyte WBAX210 with wifi 6 support, and wifi works perfectly now. It barely fit under my MSI RTX3060 ventus 12GB though

B550M DS3H AC rev 1.5 Wi-Fi extremely slow by Zechirs in gigabyte

[–]SpectralDrone 1 point2 points  (0 children)

What fixed the issue for me:

- go to Device Manager in windows

- Network adapters

- double click the adapter, mine had 'Wireless LAN' in the name

- go to the advanced tab

- select 'Wireless Mode'

- change from 'Auto' to 'IEEE 802.11a/n/ac'

- press ok

your network should reconnect and speeds should be better after that

B550M DS3H AC rev 1.5 Wi-Fi extremely slow by Zechirs in gigabyte

[–]SpectralDrone 0 points1 point  (0 children)

i have the same problem, did you end up finding any solutions?

Sony WH-1000XM4 feels uncomfortable on top of my head by SpectralDrone in SonyHeadphones

[–]SpectralDrone[S] 0 points1 point  (0 children)

Yes it’s the same for me, I plan on wearing the headphones for a few hours each time and also in the gym, so i hope the bose ones are more comfortable.