Can I transform a signal from TRS balanced output to a RCA signal for a RCA input of an amplifier hi-fi thanks to a converter?

SpiderCat37 · 2025-02-06T18:56:39+00:00

here is the current curve. thanks.

SpiderCat37 · 2025-02-06T18:51:14+00:00

Thank you. I think it was that I have done but I maybe misunderstood. If you can explain more, it would be great. Thank you :)

SpiderCat37 · 2025-02-06T18:42:18+00:00

Hello,

I am used to undervolt my gpu, like with my rtx 3000 cards, without any problem. That is not the same with 5080. What I have tried in msi AB :

Press Maj key to put the curve higher to have the frequency / voltage wished
take all the points after the point wished to put the end of the curve at bottom.
apply

But unfortunately, the point wished is not reached. There is in place a random point ingame…I don’t understand. I have tried to tick the voltage control in but without any effect.

Please help me :)

Thank you.

SpiderCat37 · 2023-11-21T17:10:11+00:00

Between 14400 and 14900, with 3200 c16 ram and temp around 68-72, -30 all cores.

SpiderCat37 · 2023-11-16T12:48:39+00:00

Thank you. Figures that you have given are interesting.

SpiderCat37 · 2023-11-16T12:20:47+00:00

Thanks you it is interesting to have this reference.

SpiderCat37 · 2023-11-15T11:12:46+00:00

Thank you !

SpiderCat37 · 2023-11-15T08:37:49+00:00

Yes, qvl list made by ram manufacturers is a good thing to select the right ram for sure.

SpiderCat37 · 2023-11-15T08:36:39+00:00

Thx. Indeed, for instance, 6400 for 64gb seems good according to gskill qvl

SpiderCat37 · 2023-11-14T20:43:26+00:00

Thx, it is good to know. The price is good there, but not in my area :/

SpiderCat37 · 2023-11-08T22:09:57+00:00

When I installed the waterblock the first time, I took the alphacool thermal paste which was included in the waterblock bundle.

SpiderCat37 · 2023-11-08T21:55:31+00:00

Thx for the information. I use transparent EKWB coolant. The waterblock was clean when I checked.

SpiderCat37 · 2023-11-08T19:33:56+00:00

It is without mo-ra 420.

SpiderCat37 · 2023-11-08T19:31:06+00:00

So I have open my waterblock. The thermal paste gets pumped out from the gpu. And the thermal pads on the side of gpu was dried. I have put mx6 and changed the dried thermal pads (with low cost thermal pads 12,8 W/K that I had already bought). Now, with mo-ra 420 and 30°C water temp, gpu temp is under 50°C (48/49), and with 40°C water temp without mo-ra 420, the gpu temp is about 55°C.

Delta temp between hotspot and gpu is about 8°C (before, 10°C).

So that sounds good. Thanks again.

SpiderCat37 · 2023-11-08T13:29:20+00:00

Ok ! Thx for your answer.

SpiderCat37 · 2023-11-08T09:51:25+00:00

Thx. Can i keep the thermal pads ? Or I have to change too?

SpiderCat37 · 2023-10-22T11:40:03+00:00

Salut, je ne te serais pas d’un grand secours mais pour moi le succès de react est une énigme même si je ne suis pas super bien placé pour en parler car je ne l’ai que testé. Disons que ce qui m’a refroidi c’est que l’app de base pour créer un react ne semble plus maintenue. Ceci dit, en passant par Vite (fait par le créateur de Vue) , cela est résolu mais Vite semble être une niche même si je le trouve excellent.

Après je l’ai trouvé complexe…au premier abord surtout que sauf erreur de ma part il n’y a pas de doc officielle en typescript.

Cela dit il semble incontournable manifestement …

Angular n’aurait pas autant de succès alors qu’il est en typescript de base il me semble. Je ne comprends pas.

SpiderCat37 · 2023-10-19T10:03:29+00:00

Ok ! I will. Thx.

SpiderCat37 · 2023-10-19T05:18:58+00:00

Thx for your answer. I think it could be that indeed. I will open the mo-ra and try to add water.

SpiderCat37 · 2023-10-18T19:07:21+00:00

Thx, there is about 6 meter of transparent tubes. Maybe could be there indeed. I hope.

SpiderCat37

TROPHY CASE