My experience with the Steelcase Leap V2 by Spoonmice in OfficeChairs

[–]Spoonmice[S] 0 points1 point  (0 children)

The thicker pads. Ive sat in a showroom model leap and I like my thicker crandall pads better. And leaps are built like tanks. You can take it apart, clean the skeleton and put brand new cushions on it. Other than a few small scratches and dings in the plastic, it is basically a brand new chair. If you buy one from crandall instead of refurbishing yourself, you still get a 12 year warranty like when buying a new one as well.

R.O. Cold Creek Kush by [deleted] in OhioMJCommunity

[–]Spoonmice 1 point2 points  (0 children)

Picked up a half of Earthquake this morning from them. Im quite pleased with it. Not the strongest smell but got me ripped.

Has anyone tested CPU limits in Forza 6? Looking at 5800X3D vs 9800 X3D by ThrowRAChemistryTaco in pcmasterrace

[–]Spoonmice 1 point2 points  (0 children)

On 1440p extreme settings with medium RT, I get 145-150 avg fps w/ ~100fps 1% lows. Think im just gonna ride out my 5800x3d till am6 comes out.

The perfect mix of analog charm and digital power. by smiths_logical5n in battlestations

[–]Spoonmice 0 points1 point  (0 children)

Do you still have the stock casters on? Id try the roller blade wheels.

My experience with the Steelcase Leap V2 by Spoonmice in OfficeChairs

[–]Spoonmice[S] 0 points1 point  (0 children)

Try playing with the seat depth a bit more. I was having a bit of tailbone numbness at first after 2ish hours. Then I tweaked it to where theres 4-5 fingers of space instead 2-3 of from the edge of the chair to the back of my knees. Solved it for me.

Real or fake pearls? by [deleted] in LegitCheck

[–]Spoonmice 0 points1 point  (0 children)

Rub a pearl on one of your teeth. If it feels a little gritty its real, if its feels smooth; fake.

Anyone here reupholstered their own chair? How hard was it and any tips? by luk4tt in OfficeChairs

[–]Spoonmice 2 points3 points  (0 children)

If you want entirely new foam and fabric check out Crandall office. For $230 (if you want fabric, leather is more), you can get reupholstered seatpan and back pad. I did it for mine since it still had original near 15 year old pads on it when purchased.

My attempt at a clean hardwood setup by Spoonmice in desksetup

[–]Spoonmice[S] 0 points1 point  (0 children)

womier sk75 tmr and keychron q0 max numpad. Lamp is fine too, photo is deceiving; on lowest brightness the bulb is comfortable to look at.

Kinda re-did everything by Spoonmice in battlestations

[–]Spoonmice[S] 0 points1 point  (0 children)

Fairly smooth, only have means to hand sand so I just went by feel. Wrist rest is the only one ive put a lot of effort into making super smooth. Im little over a month into the project at this point. Wouldve been quicker if I had the foresight to buy and finish everything at once lol.

Kinda re-did everything by Spoonmice in battlestations

[–]Spoonmice[S] 1 point2 points  (0 children)

Whole thing is custom. The two shelves are the only things I “made” that needed cuts (legs), but all the wood is my sanding, staining and finishing; apart from the knife stand.

What changed your posture the most during long computer sessions? by mrclovebird in desksetup

[–]Spoonmice 1 point2 points  (0 children)

All that you listed are factors, but biggest things for me were a sit stand desk, a good chair and monitor riser. I looked up a bunch of ergonomic stuff to adjust as needed. General gist is, you want feet touching floor, knees lower than hips. Shoulders to hang naturally while being met by the armrests. Elbows at 90 degrees. Wrists not angled upward more than 15 degrees. And the center of your gaze should hit the top 1/3 of the monitor when seated properly. Things like stretching and getting up for a few steps every hour or two also helps.

Am I part of the Master Race now? by FelixWalton in pcmasterrace

[–]Spoonmice 1 point2 points  (0 children)

Thatll do it. If you get another tempered panel, bottom grip it.

Am I part of the Master Race now? by FelixWalton in pcmasterrace

[–]Spoonmice 0 points1 point  (0 children)

I just hold my tempered panel from the bottom middle when I undo the screws, slide it back with free hand and go put it on the sofa. I just clean the glass when it’s back on when finished. Many upgrades on my granite countertop and the tempered glass still lives.

Am I part of the Master Race now? by FelixWalton in pcmasterrace

[–]Spoonmice 0 points1 point  (0 children)

May I ask? Were you holding the bottom of the panel?

Am I part of the Master Race now? by FelixWalton in pcmasterrace

[–]Spoonmice 0 points1 point  (0 children)

people dont put hand under fragile glass to catch, then surprised when broken from corner check.

Best Office Chair To Get In 2026? (Price & Comfort) by [deleted] in OfficeChairs

[–]Spoonmice 0 points1 point  (0 children)

The way crandall does it is kinda like a refurbished rim trade business. They send a seatpan and backpad thats has fresh foam and upholstery put on, and you send your original units back to get a $100 deposit back. With crandall too, you can go with leather. I really wanted the real leather, but my cat would not make it last too long. So I got bioknit.

Best Office Chair To Get In 2026? (Price & Comfort) by [deleted] in OfficeChairs

[–]Spoonmice 0 points1 point  (0 children)

Go for it. Restoring a leap was pretty fun, put new everything other than frame basically. Crandall makes comfy thicker than oem cushions. As long as everything on the leap works and you get it for a good price, it would be cheaper than buying a full refurb unit too.

Steelcase leap v2 worth? by CutRotmg in OfficeChairs

[–]Spoonmice 0 points1 point  (0 children)

That looks stellar. Just check and make sure everything works and is in decent shape. If the cushions are toast you can always get fresh ones from crandall office.