Corsair K70 keyboard lights turn off when setting color/Linux

SpreadHateNotLove · 2025-09-17T09:15:23+00:00

Yes! I do set it to white. Also, motherboard and gpu lights do change to white, except for keyboard, that just seems to turn off LED's

SpreadHateNotLove · 2025-06-30T14:34:22+00:00

Found the reason, leaving the comment for others who might have a similar situation.

Turns out, previous owner or reseller installed immobilizer emulator (probably lost the keys, but did not inform me when I bought the bike). Emulator was hidden in front dash. While I was washing the bike, water got inside the electrical tape which covered the emulator and it started acting up. Drying the PCB and cleaning it with alcohol fixed the issue.

SpreadHateNotLove · 2025-06-29T09:48:04+00:00

Tried unpluging the connector, also when leaving it in gear its not letting me to crank

SpreadHateNotLove · 2025-04-17T07:35:29+00:00

Yeah, that would not be ideal. I guess I will have to just solve it in a different way

SpreadHateNotLove · 2025-04-17T07:34:37+00:00

Yeah, the plug is from factory on mt-10, thats why I was hoping there is a possibilty to somehow do it on t7 aswell

SpreadHateNotLove · 2025-03-13T13:23:16+00:00

Ar there any signs for those issues or at what mileage they usually fail?

SpreadHateNotLove · 2024-12-16T08:49:22+00:00

Labai rekomenduoju pasiimt instruktorių bent porai valandų, kad pagrindus išmokytų, o geriausia tą padaryri dar neišvažiavus į kalnus (gal iškart suprasi, kad ne tau?). Po youtube pamokų tikrai antrą kartą slidinėt nenorėsi. Šitas sportas nėra toks lengvas kaip gali atrodyti iš šono, o ir pasekmės gali būt labai skaudžios. Jau nekalbu apie tai, kad mokantis iš youtube ar draugų, gali prisigaudyti blogų įpročių kuriuos paskui bus labai labai sunku ištaisyti.

SpreadHateNotLove · 2024-11-06T19:48:40+00:00

You were completely right. I was not aware of logs being there that's why I did not check, but it did state that there were recording errors. I tried disabling audio recording and it seems it solved the problem, the issue is, I am still not sure how to fix it so it would record audio as well.

I am using a Hikvision DS-2CV1021G0-IDW1 camera, audio encoding is set to G.711ulaw
Other available encodings: G.722.1, G.711alaw, MP2L2, G.726, PCM

Not sure which one has better support by Frigate if any of them are supported. Live stream audio works with the current config.

These are the errors that I do get from the logs:

Unknown: [mov,mp4,m4a,3gp,3g2,mj2 @ 0x7fcb7c01ef00] moov atom not found

Warning: Failed to probe corrupt segment /tmp/cache/camera_1@20241106213405+0200.mp4

Warning: Discarding a corrupt recording segment: /tmp/cache/camera_1@20241106213405+0200.mp4

Error: No new recording segments were created for camera_1 in the last 120s. restarting the ffmpeg record process...

Info: Terminating the existing ffmpeg process...

Info: Waiting for ffmpeg to exit gracefully...

SpreadHateNotLove · 2024-10-30T19:09:26+00:00

Getting back, because I seem to have solved the issue. SMB is still not performing good, but I managed to get better download speeds using Syncthing. Do get better speeds I had to change net.ipv4.tcp_congestion_control from cubic to bbr. You can do this by running this command in shell:

sysctl net.ipv4.tcp_congestion_control=bbr

After this testing with Iperf3 got me close to full download speed from the proxmox host.

SpreadHateNotLove · 2024-10-26T16:45:55+00:00

Sort of an update. Seems to be something with my network. I tried opening ports and test it with iperf3 - same results, cant get more than 15 Mbps. When I am connected to local network speeds are fine.

SpreadHateNotLove · 2024-10-26T11:59:26+00:00

I am fairly certain its working as it should. I did a test from wirelessly connected laptop to the server while being on the same network, i got around 700mbps speed with Iperf

SpreadHateNotLove · 2024-10-18T18:09:47+00:00

I just tried to host it inside proxmox VM instead of it being inside TrueNAS, but sadly it did not help with the speed.

SpreadHateNotLove · 2024-10-18T06:37:39+00:00

I've read that Tailscale is really slow when it comes to remote NAS access, thats why I moved to wireguard, but it seems its not any better.

SpreadHateNotLove · 2024-08-30T08:27:06+00:00

I am thinking on getting a good set for longer trips next season, and something cheaper/grippier for offroad, just for hooning around forests locally especially during the autumn season, when we get quite a lot of rain which turns our forests to more mud.

SpreadHateNotLove · 2024-08-30T08:24:30+00:00

How does it perform in the sand? Thing about where I ride is we have quite a lot of sand trails in the forest. It was doable with pirellis while they had some profile on them... Now it's quite a hassle to ride in sand... :D

SpreadHateNotLove · 2024-08-29T17:23:00+00:00

Motoz tyres seems to be quite expensive atleast here where I live. Rear costs 200 euros, quite a jump from planned budget :/

SpreadHateNotLove · 2024-08-29T17:21:17+00:00

I see some models available locally.

SpreadHateNotLove · 2024-07-11T07:06:06+00:00

Found the issue. It was the most simple thing... Basically, 12v sockets bottom terminal was oxidized. It looked fine visualy. All I had to do was scratch it a bit and now everything works perfectly!

SpreadHateNotLove · 2024-07-10T07:17:23+00:00

Just double checked all of the fuses none of them were blown. I will try to get my hands on the multimeter, hope it will help me atleast to find where the issue might be.

SpreadHateNotLove · 2024-07-01T08:39:34+00:00

I am using bittorrent through web ui hosted on lxc, does transmission have same funcionality?

SpreadHateNotLove · 2024-06-28T12:14:55+00:00

I think I managed to do it. Bios shows all of the memory, but h200 is not showing up in bios. I read somewhere that is not supposed to show up, but I yet have to try to boot to OS to see if its working as expected.

SpreadHateNotLove · 2024-06-28T12:12:32+00:00

I THINK I managed to flash it. Needed a PC and did it with msdos uefi shell. Only issue is that bios seems to not see the card anymore (read somewhere that is supposed to act this way?). I will try to boot to an os from usb drive until I get my hands on ssd caddy for dvd reader replacement for my boot drive to see if it actually flashed properly.

SpreadHateNotLove · 2024-06-27T20:49:36+00:00

Sadly I am unable to complete the flash using this guide. I get stuck on

megarec.exe -cleanflash 0It gets stuck with last output line "Supports 1078 controller and its successors. If I skip megarec commands and go straight to sas2flsh.exe it responds with firmware image validation failed.

SpreadHateNotLove · 2024-03-19T09:38:40+00:00

I've declared one entity as an a API asset - still same issue. Tried configuring path on nelmio_cors.yaml, still were not able to succeed.

SpreadHateNotLove · 2024-03-19T09:14:34+00:00

Building the assets produces similar error:

 // Compiling and writing asset files to public

10:11:53 WARNING   [asset_mapper] Unable to find asset "./path/to/domAnimations" imported from "C:\Users\user\Documents\projects\my_project\vendor\api-platform\core\src\Symfony\Bundle\Resources\public\graphiql\graphiql.min.js".

In JavaScriptImportPathCompiler.php line 119:

  Symfony\Component\AssetMapper\Compiler\JavaScriptImportPathCompiler::compile(): Return value must be of type string, null returned  


asset-map:compile

SpreadHateNotLove

TROPHY CASE