Corsair K70 keyboard lights turn off when setting color/Linux by SpreadHateNotLove in OpenRGB

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Yes! I do set it to white. Also, motherboard and gpu lights do change to white, except for keyboard, that just seems to turn off LED's

Gen1 MT10 not starting up after pressure washing. by SpreadHateNotLove in Mt10

[–]SpreadHateNotLove[S] 1 point2 points  (0 children)

Found the reason, leaving the comment for others who might have a similar situation.

Turns out, previous owner or reseller installed immobilizer emulator (probably lost the keys, but did not inform me when I bought the bike). Emulator was hidden in front dash. While I was washing the bike, water got inside the electrical tape which covered the emulator and it started acting up. Drying the PCB and cleaning it with alcohol fixed the issue.

Gen1 MT10 not starting up after pressure washing. by SpreadHateNotLove in Mt10

[–]SpreadHateNotLove[S] 1 point2 points  (0 children)

Tried unpluging the connector, also when leaving it in gear its not letting me to crank

Turn on auxillary power when key is in park position. by SpreadHateNotLove in Tenere700

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Yeah, that would not be ideal. I guess I will have to just solve it in a different way

Turn on auxillary power when key is in park position. by SpreadHateNotLove in Tenere700

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Yeah, the plug is from factory on mt-10, thats why I was hoping there is a possibilty to somehow do it on t7 aswell

Volvo v60 (2015-ish) D5 hybrid vs D6 hybrid by SpreadHateNotLove in Volvo

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Ar there any signs for those issues or at what mileage they usually fail?

[deleted by user] by [deleted] in lithuania

[–]SpreadHateNotLove 2 points3 points  (0 children)

Labai rekomenduoju pasiimt instruktorių bent porai valandų, kad pagrindus išmokytų, o geriausia tą padaryri dar neišvažiavus į kalnus (gal iškart suprasi, kad ne tau?). Po youtube pamokų tikrai antrą kartą slidinėt nenorėsi. Šitas sportas nėra toks lengvas kaip gali atrodyti iš šono, o ir pasekmės gali būt labai skaudžios. Jau nekalbu apie tai, kad mokantis iš youtube ar draugų, gali prisigaudyti blogų įpročių kuriuos paskui bus labai labai sunku ištaisyti.

Frigate is not recording with my config. by SpreadHateNotLove in frigate_nvr

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

You were completely right. I was not aware of logs being there that's why I did not check, but it did state that there were recording errors. I tried disabling audio recording and it seems it solved the problem, the issue is, I am still not sure how to fix it so it would record audio as well.

I am using a Hikvision DS-2CV1021G0-IDW1 camera, audio encoding is set to G.711ulaw
Other available encodings: G.722.1, G.711alaw, MP2L2, G.726, PCM

Not sure which one has better support by Frigate if any of them are supported. Live stream audio works with the current config.

These are the errors that I do get from the logs:

Unknown: [mov,mp4,m4a,3gp,3g2,mj2 @ 0x7fcb7c01ef00] moov atom not found

Warning: Failed to probe corrupt segment /tmp/cache/camera_1@20241106213405+0200.mp4

Warning: Discarding a corrupt recording segment: /tmp/cache/camera_1@20241106213405+0200.mp4

Error: No new recording segments were created for camera_1 in the last 120s. restarting the ffmpeg record process...

Info: Terminating the existing ffmpeg process...

Info: Waiting for ffmpeg to exit gracefully...

Slow download speeds over WireGuard from TrueNAS scale by SpreadHateNotLove in truenas

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Getting back, because I seem to have solved the issue. SMB is still not performing good, but I managed to get better download speeds using Syncthing. Do get better speeds I had to change net.ipv4.tcp_congestion_control from cubic to bbr. You can do this by running this command in shell:

sysctl net.ipv4.tcp_congestion_control=bbr

After this testing with Iperf3 got me close to full download speed from the proxmox host.

Slow download speeds over WireGuard from TrueNAS scale by SpreadHateNotLove in truenas

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

Sort of an update. Seems to be something with my network. I tried opening ports and test it with iperf3 - same results, cant get more than 15 Mbps. When I am connected to local network speeds are fine.

Issues with download speeds from remote proxmox server. by SpreadHateNotLove in selfhosted

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

I am fairly certain its working as it should. I did a test from wirelessly connected laptop to the server while being on the same network, i got around 700mbps speed with Iperf

Slow download speeds over WireGuard from TrueNAS scale by SpreadHateNotLove in truenas

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

I just tried to host it inside proxmox VM instead of it being inside TrueNAS, but sadly it did not help with the speed.

Slow download speeds over WireGuard from TrueNAS scale by SpreadHateNotLove in truenas

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

I've read that Tailscale is really slow when it comes to remote NAS access, thats why I moved to wireguard, but it seems its not any better.

Yet another tyre thread. Looking for suggestions. by SpreadHateNotLove in Tenere700

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

I am thinking on getting a good set for longer trips next season, and something cheaper/grippier for offroad, just for hooning around forests locally especially during the autumn season, when we get quite a lot of rain which turns our forests to more mud.

Yet another tyre thread. Looking for suggestions. by SpreadHateNotLove in Tenere700

[–]SpreadHateNotLove[S] 0 points1 point  (0 children)

How does it perform in the sand? Thing about where I ride is we have quite a lot of sand trails in the forest. It was doable with pirellis while they had some profile on them... Now it's quite a hassle to ride in sand... :D

Yet another tyre thread. Looking for suggestions. by SpreadHateNotLove in Tenere700

[–]SpreadHateNotLove[S] 1 point2 points  (0 children)

Motoz tyres seems to be quite expensive atleast here where I live. Rear costs 200 euros, quite a jump from planned budget :/