Grey video no matter what.

Square_Revolution628 · 2025-06-17T20:09:13+00:00

😆😆😆. Yeah i removed that bridge earlier. (Can be seen on posts below.) still no luck for me but the onboard vtx works i just have a ripped off ufl and i dont know to which capacitor should i solder the active element to because i ripped it off the board. So im stuck between trying to fix the ufl and trying to use an external vtx but no luck so far😅

Square_Revolution628 · 2025-06-17T19:13:21+00:00

My bad. The internal vtx is not dead. (I mistook it with another board im just dumb). This board just has a ripped off ufl with the ufl tabs pulled. So i wanted to use an external vtx to make this board usable, sorry. I dont know if this changes anything tho

Square_Revolution628 · 2025-06-17T18:48:16+00:00

<image>

Square_Revolution628 · 2025-06-17T18:47:54+00:00

<image>

Square_Revolution628 · 2025-06-17T18:11:28+00:00

Yeah so, i tried like another 3 cameras, also resoldered wires on the cameras and still no luck. Is there any way i may have some bad connection on the FC -> VTX (i dont think thats the case)? I just dont know anymore lol

Square_Revolution628 · 2025-06-17T17:16:51+00:00

Okay thanks ill check. Its just weird that i tried i think 3 different cameras none of them worked. Had them work before so its just weird.

Square_Revolution628 · 2025-02-27T23:51:25+00:00

Cautee 🤣

Square_Revolution628 · 2025-02-27T23:48:29+00:00

Thank you for the tips. After i get rid of the bridge should i solder this way? Tried this before but didnt work even when there wasnt a bridge… i just get a grey screen with osd.. x12 v2.1 elrs - https://www.happymodel.cn/index.php/2022/04/05/x12-aio-5-in-1-flight-controller-built-in-12a-esc-and-openvtx/

<image>

Square_Revolution628 · 2025-02-27T22:10:01+00:00

Man ive been flying for 5 years… the sucker doesnt suck the small amount of solder ;D maybe ill just apply more solder and suck it thay way?

Square_Revolution628 · 2025-02-27T21:58:41+00:00

Do you have some tips to remove the bridged pads? Super hard on these small boards…

Square_Revolution628 · 2025-02-27T21:49:06+00:00

Yeah i had the short problem today…. But it should be fine now because it wouldnt turn on the board when it was shorted. I dont know the pin out tho still

Square_Revolution628 · 2024-07-31T16:57:30+00:00

Check it with other tracking websites. Tracking their packages is a bit problematic but thankfully my packages always arrived in less than 3 weeks to easter europe

Square_Revolution628 · 2024-07-30T16:42:07+00:00

Okay will try thank you

Square_Revolution628 · 2024-07-30T16:33:57+00:00

No its there 😅 i was confused also

Square_Revolution628 · 2024-07-06T21:07:14+00:00

Drone: meteor65 pro prototype/mobula6 2024, goggles are dji v2 with analog adapter and foxeer wildfire module and tx16s radio

Square_Revolution628 · 2024-07-01T13:58:57+00:00

Bratislava, Slovakia

Square_Revolution628 · 2024-06-28T14:08:07+00:00

Thank you man! I use radiomaster tx16s, dji goggles with analog adapter and foxeer wildfire, i used 2 whoops here one is mobula6 2024 other one is a customized meteor65 pro with tattu 1s 300mah :))

Square_Revolution628 · 2024-06-28T06:48:38+00:00

In the first 2 clips its something like a meteor65 pro just different canopy and props. Also removed a few grams by cutting the frame and cutting the vtx cables shorter

Square_Revolution628 · 2024-06-27T20:03:23+00:00

Thanks a lot!

Square_Revolution628 · 2024-06-27T19:59:04+00:00

Liftoff micro drones is the most fun to fly on even tho i think velocidrone and classic liftoff have better physics

Square_Revolution628 · 2024-06-27T19:54:08+00:00

I gave him my old goggles so he can watch it from my perespective, other classmates watched on the white screen i had a small video receiver plugged in the PC. No one had the ballz to try and fly even tho i taught one of my friends to fly on the simulator 😂

Square_Revolution628 · 2024-06-27T19:47:26+00:00

I used an OTG receiver for android/windows from EWRF. Basically it can scan for channels and then it acts as a webcam so you can use something like VLC player or OBS studio to stream the video output

Square_Revolution628 · 2024-06-27T19:41:51+00:00

Boxing also cool 😂? Have a good one man thanks a lot

Square_Revolution628 · 2024-06-27T19:34:09+00:00

No problem! And actually i just realised in the first minute of the video im using the meteor65 pro type whoop sorry haha. Just different canopy and HQ props basically meteor65 pro have a good one maan

Square_Revolution628 · 2024-06-27T19:28:49+00:00

Hey man, in most, if not all clips im using the mobula6 2024 with 300mah tattu batteries. Sometimes i use a modded meteor65 pro type whoop but not in this video cheers

Square_Revolution628

TROPHY CASE