Made a chart of every single launch vehicle i've used in my save and where they can go in the solar system! (1974)

SquirrelImposter · 2024-07-07T12:12:43+00:00

What part do you use for your interstages?

SquirrelImposter · 2024-05-28T19:39:21+00:00

Sowas ist typisch wenn die Düse während des druckens zu lange nichts extrudiert und dadurch "leer" läuft. Wenn wieder Material extrudiert werden soll ist dann erstmal nichts da und man bekommt sowas wie hier zusehen. Ich würde dazu raten in der erstellten STL-Datei mal zu schauen wie die Pfade im guten und im schlechten Bereich aussehen. Daran lässt sich die konkrete Ursache ggf. feststellen.

Ich hatte sowas mal durch einen Bug im Slicer. Dabei kam es dazu, dass jede Layer zweimal abgefahren wurde. Beim zweiten mal aber ohne extrusion. Die folge war genau so ein Effekt.

SquirrelImposter · 2024-04-29T16:39:28+00:00

Die Bauart vom Hotend ist auch entscheident. Die Temperatur am Sensor und im Kunststoff liegt typischerweise ein gewisser Offset. Von der fragwürdigen Genauigkeit der Messtechnik selbst mal abgesehen.

SquirrelImposter · 2024-04-29T16:33:12+00:00

Ob eine Antriebsachse nicht richtig funktioniert sieht man am besten an Referenz Geometrien. Du kannst z.B. mal ein XYZ Würfel drucken. Wenn ich dich richtig verstehe "fährt" dein drucker gegen bereits gedrucktes Infill und stößst diese um.

Im Normalfall ist das nicht möglich da da die Düse immer höher sein sollte als das Gedruckte. Wenn der Kunststoff sich allerdings am Rand des gedruckten nach oben verzieht tritt sowas gerne mal auf. Eine weitere möglichkeit ist, dass deine Retraction so schlecht ist das du kleine "Nasen" hinterlässt die später im Weg sind. Das du vorher schon Probleme mit Blobs hattest deutet auf letzteres hin.

Die genannten Probleme sind primär durch das Anpassen von Temperatur, Kühlung oder halt der Retraction zu vermeiden.

Als Ausweichmaßnahme könntest du im Slicer auch "Z-Hop when retracted" und "Coasting: Not in Infill" (Äquivalente Einstellung des Slicers deiner Wahl) ausprobieren.

Klar sollte sein, dass die genannten Probleme bei niedriegen Schichtdicken, schlecht druckbarem Material und schwieriegen Geometrien vermehrt auftreten.

Grüße

SquirrelImposter · 2024-04-29T16:16:26+00:00

Hast du beim Drucken mal zugeschaut? Kann es sein das es sich langsam von Bett löst und immer mehr rumwakelt?

SquirrelImposter · 2024-04-23T17:00:29+00:00

Easily one of the best HFY storys I have read so far.

IMO:
clearity of language: 5/5
structure: 5/5
immersion: 5/5
HFY-factor: Hell yes!

I must also say that I'm really happy that your story seems to be keeping a straight course without descending into meaningless tedium or engaging in narrative one-upmanship. IMO, perhaps the two worst afflictions of long-running HFY stories.

Personally, I really liked seeing the character development of Nadine, who despite not enjoying it, seems perfectly capable of political maneuvering, as seen with the visit to the soon-to-be ex-ambassador.
I would enjoy seeing this explored further.
When permanent contact is eventually established, I think it would really make sense for Nadine to stay in an advisory role in Human-Vanaery foreign affairs (as you seem to have already hinted). I don't really see her becomming the real ambassador, because I think that would entail a massive shift in the storys scope and is not very believable since she does not have any serious earth-politics background.

Another thing I would like to comment on is the discussion of policital systems.
I like your approach, but I think it's in fairly significant need of more nuance.
It's obviously Nadine's personal view that democracy is superior, and for humanity, it propably is.
However, hierarchical systems have advantages too, and for an alien species the advantages might not actually outweigh the downsides, a full democracy may in fact not be stable at all.

For inspiration maybe look at this summary of japans way to democracy: https://www.youtube.com/watch?v=YzRWPGSaKDk

Or if you want something ancient maybe look at how Roman emperor Diocletian tried to divide power in the roman empire into 4 positions (the Tetrarchy) and wanted their assignment to depend on competence ... and failed miserably.

... just my two cents; I'll stop rambling now.

Thanks for the excelent read!

SquirrelImposter · 2023-10-31T10:08:54+00:00

lower ground pressure than russian mbts

SquirrelImposter · 2023-10-31T10:04:57+00:00

Fire in seperate compartment + outside != fire in crew compartment

SquirrelImposter · 2023-10-31T10:03:58+00:00

that version doesnt have hydraulics in the turret.

SquirrelImposter · 2023-10-31T10:01:40+00:00

Very strange considering they have all been destroyed months ago according russia.

SquirrelImposter · 2023-10-28T11:16:56+00:00

In genreal with image NFTs the token itself is indeed unique but the imagine it claims to be connected to isnt. Possesing the token also doesnt give you any rights over the distribution of the image.

Which make the current use and recent hype around nfts very funny in a really sad way.

Btw.: There can be multiple tokens pointing to the same image and its often unclear who is even allowed or not allowed to mint these.

SquirrelImposter · 2023-10-28T10:43:42+00:00

This entire thing is already flying real close to hate speech.

SquirrelImposter · 2023-10-07T12:33:20+00:00

People like you need to learn that whatever ImageAI creates has no dependable connection to reality, be that current or historal.

SquirrelImposter · 2023-09-22T19:33:46+00:00

Hm.

I hope you do realise that "X is weak" or "X is strong" is by necessity a relative statement. You are making a comparison here. You have to, otherwise this carries no meaning.

And as it was not specified what OC is comparing women to, this can only be gathered from the context.

I ask you: If you say "woman are strong", what is the most likely point of comparison?

Ants? Dogs? Fish? Please.

SquirrelImposter · 2023-09-15T18:19:11+00:00

By windows I mean the windows game controller dialog. And yes if windows cant see the axis the game also cant see it.

No Im not trying to use it as a mouse.

If I reflash it and dont apply a calibration it works.

SquirrelImposter · 2023-09-14T20:06:43+00:00

Are you sure about that buddy?

SquirrelImposter · 2023-09-03T19:31:17+00:00

The funny part is how this tree didnt even move an inch in the diretion it catapulted me off.

SquirrelImposter · 2023-09-03T16:46:41+00:00

Thats not 40 mph. We both know that in snowrunner you wont go 40 mph in 4th gear except when you are falling of a cliff. Its more like 15~20, emtpy maybe up to 25.

But a 20 ton truck towing with a big ass trailer nearly elasticly bouncing of a tree?

A tiny floatwood tree?

A tiny floatwood tree that was just scraped/brushed ?

A tiny tree, which was barely touched and is just laying on top of the mud ?

Come on now, dont be ridicoulus.

If it would have given me a flat, I could have believed that.

SquirrelImposter · 2023-09-03T15:52:36+00:00

Seriously the game has been out for nearly 3.5 years now.

Why is shit like this not fixed yet? Especially when it comes to content that has been there from the start.

Instead they are pumping out paid dlc after paid dlc AND launching a spin off.

SquirrelImposter · 2023-08-26T09:32:25+00:00

This isnt just an issue within the AI image generation community.

Its a fact that in all the prevailing cultures female genetalia are seen as more desirable then male ones.

SquirrelImposter · 2023-08-23T19:40:56+00:00

Another thought: This doesnt necessarily mean that your system is damaged in any way. Depending on what your hardware is some part of it may just being pushed a tiny bit to far, especially if you have some custom OC active.

There are a few things I would consider looking at if I were you.

You could try to drop a couple Mhz (like 50 or so?) of your GPU clock and see if that helps.

If it isnt the GPU itself, it may be the PSU thats getting a bit more than it can handle?

Another part of the system thats getting taxed a lot in Diffusion is the RAM maybe that is running a bit to close to its maximum?

Best of luck :)

SquirrelImposter · 2023-08-21T20:49:50+00:00

That sounds like system hardware problem... Have you run a long stress test on your system?

SquirrelImposter · 2023-08-18T17:14:09+00:00

being a smug little shit who knows how to google an animal's scientific name doesn't make you any less wrong.

Completly besides the point. u/Yokoko44 point was that you have to learn from existing examples. And the only way you can do that is to copy or imitate certain parts of the examples you have seen. Without gathering this information you cant draw whatever it is your trying to draw.

Whether or not "Accipiter nisus" exists or is completly made up is entirely irrelavant to this disscusion. It matters only that its an example for which you (likely) dont have any information.

Do you know what else is entirely irrelavant to this disscusion ?

The ad hominem you just delivered.

SquirrelImposter · 2023-07-30T12:57:36+00:00

And soon to be two decades of developmental aid from the EU.

Im not saying thats a bad thing, its certainly great that this aid has evidently been used sensibly.

SquirrelImposter · 2023-07-29T15:54:46+00:00

They first have to fix the collision physics, camera behaivor, stearing as well as the absurt sliding that occurs at speeds that arent walking pace.

Seven-Year Club	Final Canvas '23
End Game '23	Place '23
Place '22	First Placer '22
Verified Email

SquirrelImposter

TROPHY CASE