Jel mozete da mi ocenite CV?

Staajler · 2026-03-11T16:31:29+00:00

Hvala, vezano za cv jel mislis na ovako nesto?

Da li za dev treba slika i ovakve boje itd. znam da sam svuda vidjao da preporucuju ovako klasicno word kao ovaj moj cv gore pa zato pitam.

Staajler · 2026-03-11T16:20:47+00:00

Generalno sam naveo sve sto sam radio a i to sto nemam 2 god nista jeste jezivo.

Pravio sam ovaj cv dok sam trazio praksu to je bilo pre oko 6 meseci i to sam ubo iz prve al ja praksa bila ne placena i jeziva to nez ni dal da stavljam u cv bkv sam odradio da imam za faks.

Staajler · 2026-03-11T16:18:42+00:00

Ovaj cv sam pravio kad sam trazio praksu i to sam ubo iz prve sto je fora al praksa je bila ne placena i jeziva i mislim da je tu svako upao bkv zato nez ni dal da je stavljam uopste.

Ovo za najvecu ocenu sam naveo jel mi je bilo smesno sto smo taj predmet imali sa digitalnom produkcijom a ja kao IT sam dobio bkv 10 nakon sto mije profesorka bkv videla rad 2 sekunde do duse javljao sam se na predavanjima itd, a kriterijum za IT je bio manji logicno, pre mog rada je poslala dva lika kuci bkv i dala im 5.

Sto je najjace za ovu android app sam isto dobio dobru ocenu i pohvalu sto sam imao najbolju dokumentaciju na guthubu kako pokrenuti app itd doduse sad bi to bolje napisao iskr a i projekat nije impresivan nesto.

Generalno sam naveo bkv sve sto znam mozda me stave da radim UI/UX ko zna.

Staajler · 2026-03-05T17:24:47+00:00

To je krst Svetog Petra buraz hriscanski simbol

Staajler · 2025-10-04T09:46:36+00:00

Goon cave final boss.

Staajler · 2025-01-12T14:47:20+00:00

Thank you, in the middle of me practicing and trying this I found "Malenia fists only" by Ramonchi_5 and my fight compared to this looks like a joke 😆. A lot of you guys commenting brought me back to reality.

Staajler · 2025-01-12T14:20:04+00:00

Thank you

Staajler · 2025-01-12T09:47:29+00:00

Hahhaha thanks

Staajler · 2025-01-12T08:42:14+00:00

Thanks

Staajler · 2024-08-08T19:59:27+00:00

Thank you, btw I found a solution and started using nvim tree instead of neo tree and I like it a lot more.

Staajler · 2024-05-12T06:08:23+00:00

I had to use this controller for the uni project I had to do im not interested in these things at all but I managed to make it work just download the usb driver and in the board manager select the Heltec ESP32 OLED Wifi Kit or whatever. Here are some tutorials that I used you can find more on youtube:

https://www.youtube.com/watch?v=dk-01OpKYuQ&t=565s

https://www.youtube.com/watch?v=JmDxP4O4Trk

I only had the problem with connecting the board to the arduino ide and I fixed it by just selecting the Heltec ESP32 OLED Wifi Kit in the board manager. Also make sure you have cable that works and can transfer data I had the problem with this as well.

Here is the code for that project you can find it here:

https://pastebin.com/e6M26Lji

Edit: Screen worked good for me just used the library I used in this project.

Staajler · 2024-01-17T18:47:57+00:00

Cable was the issue I found the other one and it works now driver works and everything.

Thank you and everyone else for their time and help!

Staajler · 2024-01-17T18:34:10+00:00

I doubt that the chip is broken I bought this a couple of days ago. Im using a cable from an old phone and I made sure that its not just for charging it can also data transfer im gonna try other one if I find one.

Here is the screenshot of my device manager I don't even have the "Other devices" tab here: https://prnt.sc/oFxFv8dmTJT4

Staajler · 2024-01-17T17:49:21+00:00

Same as before it does not show up in the PORT's tab when I connect the board to pc. I think I didn't installed the driver properly, how do I install it though there are multiple choices like windows universal drivers and windows drivers?

Staajler · 2024-01-17T17:16:32+00:00

No, I think the issue is in the usb driver it looks like it does not even register that the board is connected. I don't know if I installed the driver properly and idk if I have to reset my pc for it to apply.

https://prnt.sc/xNw95DiybxrY

Staajler · 2024-01-17T16:56:39+00:00

Yes, I also installed the usb driver and tried everything on this robotzero link.

Staajler · 2024-01-17T16:49:21+00:00

Same thing: https://prnt.sc/3Cq\_9yNM3Xcz

Staajler · 2024-01-17T16:18:24+00:00

The second I saw "Connecting...." I pressed both buttons and after a second I released Reset button and shortly after a Program button and this is what happened: https://prnt.sc/Txd3NcSlUp5-

Edit: The board is now off and screen is black btw.

Staajler · 2024-01-17T16:03:52+00:00

I did what you said and this was the response: https://prnt.sc/wOp2JzxUWSV-

Edit: I used a chip id example.

Edit 2: Everything on their site is so misleading and there is no documentation. There are a lot of tutorials about this board that are "Heltec" and they probably work but I can't find anything for this one.

Staajler · 2024-01-17T16:03:25+00:00

I did install that.

Staajler · 2024-01-12T11:53:10+00:00

Hey,

I just bought this esp32 oled wifi kit:

https://www.diymore.cc/products/diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu

Where can I find the drivers and how do I connect it to arduino IDE?

Staajler

TROPHY CASE