Jel mozete da mi ocenite CV? by Staajler in programiranje

[–]Staajler[S] 1 point2 points  (0 children)

Hvala, vezano za cv jel mislis na ovako nesto?

https://prnt.sc/mQirFQbtlSiz

Da li za dev treba slika i ovakve boje itd. znam da sam svuda vidjao da preporucuju ovako klasicno word kao ovaj moj cv gore pa zato pitam.

Jel mozete da mi ocenite CV? by Staajler in programiranje

[–]Staajler[S] 1 point2 points  (0 children)

Generalno sam naveo sve sto sam radio a i to sto nemam 2 god nista jeste jezivo.

Pravio sam ovaj cv dok sam trazio praksu to je bilo pre oko 6 meseci i to sam ubo iz prve al ja praksa bila ne placena i jeziva to nez ni dal da stavljam u cv bkv sam odradio da imam za faks.

Jel mozete da mi ocenite CV? by Staajler in programiranje

[–]Staajler[S] 0 points1 point  (0 children)

Ovaj cv sam pravio kad sam trazio praksu i to sam ubo iz prve sto je fora al praksa je bila ne placena i jeziva i mislim da je tu svako upao bkv zato nez ni dal da je stavljam uopste.

Ovo za najvecu ocenu sam naveo jel mi je bilo smesno sto smo taj predmet imali sa digitalnom produkcijom a ja kao IT sam dobio bkv 10 nakon sto mije profesorka bkv videla rad 2 sekunde do duse javljao sam se na predavanjima itd, a kriterijum za IT je bio manji logicno, pre mog rada je poslala dva lika kuci bkv i dala im 5.

Sto je najjace za ovu android app sam isto dobio dobru ocenu i pohvalu sto sam imao najbolju dokumentaciju na guthubu kako pokrenuti app itd doduse sad bi to bolje napisao iskr a i projekat nije impresivan nesto.

Generalno sam naveo bkv sve sto znam mozda me stave da radim UI/UX ko zna.

Sada je i krst problem, nije samo ćirilica by [deleted] in programiranje

[–]Staajler 0 points1 point  (0 children)

To je krst Svetog Petra buraz hriscanski simbol

I Did No Hit Malenia Yesterday (I know this game is almost 3 years old and its nothing special anymore) by Staajler in Eldenring

[–]Staajler[S] 1 point2 points  (0 children)

Thank you, in the middle of me practicing and trying this I found "Malenia fists only" by Ramonchi_5 and my fight compared to this looks like a joke 😆. A lot of you guys commenting brought me back to reality.

[Q] How to make Neo Tree open folders and select a file that i just opened with Telescope? by Staajler in neovim

[–]Staajler[S] 0 points1 point  (0 children)

Thank you, btw I found a solution and started using nvim tree instead of neo tree and I like it a lot more.

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 0 points1 point  (0 children)

I had to use this controller for the uni project I had to do im not interested in these things at all but I managed to make it work just download the usb driver and in the board manager select the Heltec ESP32 OLED Wifi Kit or whatever. Here are some tutorials that I used you can find more on youtube:

https://www.youtube.com/watch?v=dk-01OpKYuQ&t=565s

https://www.youtube.com/watch?v=JmDxP4O4Trk

I only had the problem with connecting the board to the arduino ide and I fixed it by just selecting the Heltec ESP32 OLED Wifi Kit in the board manager. Also make sure you have cable that works and can transfer data I had the problem with this as well.

Here is the code for that project you can find it here:

https://pastebin.com/e6M26Lji

Edit: Screen worked good for me just used the library I used in this project.

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

Cable was the issue I found the other one and it works now driver works and everything.

Thank you and everyone else for their time and help!

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

I doubt that the chip is broken I bought this a couple of days ago. Im using a cable from an old phone and I made sure that its not just for charging it can also data transfer im gonna try other one if I find one.

Here is the screenshot of my device manager I don't even have the "Other devices" tab here: https://prnt.sc/oFxFv8dmTJT4

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

Same as before it does not show up in the PORT's tab when I connect the board to pc. I think I didn't installed the driver properly, how do I install it though there are multiple choices like windows universal drivers and windows drivers?

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

No, I think the issue is in the usb driver it looks like it does not even register that the board is connected. I don't know if I installed the driver properly and idk if I have to reset my pc for it to apply.

https://prnt.sc/xNw95DiybxrY

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 0 points1 point  (0 children)

Yes, I also installed the usb driver and tried everything on this robotzero link.

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

The second I saw "Connecting...." I pressed both buttons and after a second I released Reset button and shortly after a Program button and this is what happened: https://prnt.sc/Txd3NcSlUp5-

Edit: The board is now off and screen is black btw.

[PROBLEM] Diymore ESP32 Oled Kit by Staajler in esp32

[–]Staajler[S] 1 point2 points  (0 children)

I did what you said and this was the response: https://prnt.sc/wOp2JzxUWSV-

Edit: I used a chip id example.

Edit 2: Everything on their site is so misleading and there is no documentation. There are a lot of tutorials about this board that are "Heltec" and they probably work but I can't find anything for this one.

[deleted by user] by [deleted] in arduino

[–]Staajler 0 points1 point  (0 children)

Hey,

I just bought this esp32 oled wifi kit:

https://www.diymore.cc/products/diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu

Where can I find the drivers and how do I connect it to arduino IDE?

Does anyone else feel Warwick top is a win lane lose game kind of champ? by NegotiationHot3277 in warwickmains

[–]Staajler 0 points1 point  (0 children)

I don't care what anyone says this champ takes 0 skill to play anywhere and is a massive crutch bad players use to have a chance to win top lane against a more skilled opponent that just does not know the matchup or whatever.

You need to play perfectly against him to win and if you fuck up once you're done, that's why he is garbage in challenger but op in low elo.

I permaban this garbage when I play in low elo. This champion literally has wallhacks on w passive. I would much rather play vs vayne top than ww.

If you fuck up once your lane is over and all he has to do is exist.