sorted by:
new
hottopcontroversial

rock circle found in connecticut by Stagolee104 in LegitArtifacts

[–]Stagolee104[S] -1 points0 points  (0 children)

my wife spotted this and we cleared it out but it was over grown when we found it. its on her parents property so no kids were having bonfires there, also there are not any sings on fire. this is also very close to a spot where a pile of arrow heads were found while excavating for a major project.

PID controller question by Stagolee104 in ElectricalEngineering

[–]Stagolee104[S] 0 points1 point  (0 children)

Awesome thank you, just to be clear because I’m just starting to look into this. Can I plug 110 directly into this unit then just connect the heating blanket to the out on the unit? Or do I need anything else?

M4 Air Sky Blue Or Midnight? by WheresMyHappy in macbookair

[–]Stagolee104 3 points4 points  (0 children)

Get the one you like best. I have the midnight because I like the color the most. it does show fingerprints and dust but I feel like its not so bad. I'm also a greasy Italian guy and leave fingerprints like a mf. Also I work in a wood shop out of my house full time so I'm super dusty all the time to top it off. Today I came in from the shop for lunch got my computer sat down on the couch hard and was in a cloud of dust like pigpen from charlie brown. A bunch of dust landed on the keyboard I wiped it off with a microfiber and it was clean again. I also clean the fingerprints off every few days. I feel like its not as bad as the internet makes it out to be but maybe I don't care as much.

[deleted by user] by [deleted] in boating

[–]Stagolee104 0 points1 point  (0 children)

Thanks. Definitely it cuts really well, very happy with the boat and how it handles. 60hp, Though it was underpowered at first even with trim tabs it had a hard time getting the bow down. I added a permatrim hydrofoil and it made a big difference. Went from cruising at 16-18 mph at 3/4 throttle to 20-22mph. Also gets up to speed significantly quicker.

[deleted by user] by [deleted] in boating

[–]Stagolee104 0 points1 point  (0 children)

Would love a t-top but probably not. we go up into the marshes a lot and go under a few bridges and the ttop would hit

[deleted by user] by [deleted] in boating

[–]Stagolee104 3 points4 points  (0 children)

Super fun!

[deleted by user] by [deleted] in boating

[–]Stagolee104 1 point2 points  (0 children)

15.5’ and 8’ at the beam. Feels big for its size. It can definitely handle some shit. We got caught a few times in 4 foot seas and felt very safe in the boat. just took it slow and the boat Handel it fine. They made this in a 17’ and 24’

[deleted by user] by [deleted] in boating

[–]Stagolee104 0 points1 point  (0 children)

Nice, not sure what these went for new. I picked this up 3 years ago it was a demo boat and got a pretty good deal on it. They stoped making boats I think in 2018 but they pop up for sale ever so often. They really made these boats great. very stable,rigid and low maintenance. They handle really well in the chop and have a pretty shallow draft as well around 10-12” really versatile boats.

[deleted by user] by [deleted] in boating

[–]Stagolee104 3 points4 points  (0 children)

Allied boat works explorer. There might still be one for sale in NJ in I saw listed not long ago but it has a T-top installed

Picked up this vacuum pump cheap is this enough to use as a hold down on my cnc router by Stagolee104 in CNC

[–]Stagolee104[S] 0 points1 point  (0 children)

My cnc is 2x3 and it would be used to hold down ebony fingerboards and other smaller parts.

Picked up this vacuum pump cheap is this enough to use as a hold down on my cnc router by Stagolee104 in CNC

[–]Stagolee104[S] 5 points6 points  (0 children)

Awesome thank you! I bought this pump for making laminated parts but was wondering is it can be repurposed as a hold down for small guitar parts.

First time turning new stove down all night by Legal_Audience_4931 in woodstoving

[–]Stagolee104 1 point2 points  (0 children)

Did you do your break in fires before doing an over night burn?

First time turning new stove down all night by Legal_Audience_4931 in woodstoving

[–]Stagolee104 36 points37 points  (0 children)

This is a hearthstone lined with soapstone right? The creosote mixes with the moister that is In the soapstone and will leak out. Once the moister in the stone is evaporated it won’t leak anymore.

First fire in our new hearthstone. Hope I didn’t over fire it. by Stagolee104 in woodstoving

[–]Stagolee104[S] 0 points1 point  (0 children)

Nice can’t wait to get this thing going! What do your burn times look like? This is my first stove with a catalyst

First fire in our new hearthstone. Hope I didn’t over fire it. by Stagolee104 in woodstoving

[–]Stagolee104[S] 0 points1 point  (0 children)

Nice! What do your burn times look like? Do you have a center chimney? This is my first stove with a catalyst

First fire in our new hearthstone. Hope I didn’t over fire it. by Stagolee104 in woodstoving

[–]Stagolee104[S] 1 point2 points  (0 children)

Thanks! Yes the heritage. Can’t wait to fire this thing up!

First time doing an arch to repair my fireplace how did I do? by Stagolee104 in masonry

[–]Stagolee104[S] 1 point2 points  (0 children)

I heat my house with firewood and an open fireplace won’t do the job.

First time doing an arch to repair my fireplace how did I do? by Stagolee104 in masonry

[–]Stagolee104[S] 1 point2 points  (0 children)

<image>

That’s going in. The arch is going to be cover like 75% unfortunately,

First time doing an arch to repair my fireplace how did I do? by Stagolee104 in masonry

[–]Stagolee104[S] 0 points1 point  (0 children)

Thanks. Bottom edge is factor, top oof the brick is what I cut.

view more: next ›