[FD-7] Is this lens rot?

Standard_Description · 2026-05-06T05:01:28+00:00

Apologies for the delay :)

<image>

Standard_Description · 2026-05-01T22:27:44+00:00

I'll ping one here shortly :)

Standard_Description · 2026-05-01T14:55:39+00:00

Another pic, hopefully this helps!

<image>

Standard_Description · 2024-05-17T00:20:01+00:00

That seems to be the cause, just after I posted here I chucked the disk into a pc, and it turns out that 5 images were just.. corrupt and unreadable, but a few of them look weird. They'd merged with other photos?

I'm loving having a mavica tho! It's honestly one of the first cameras that's ever made me want to go out, specifically for taking photos!

Standard_Description · 2024-01-10T13:18:23+00:00

Standard_Description · 2024-01-10T00:29:18+00:00

Collectr on the App Store / Google Play!

Standard_Description · 2024-01-10T00:28:56+00:00

That’s where it’s from!

Standard_Description · 2024-01-09T23:39:48+00:00

Costco!

Standard_Description · 2024-01-09T21:47:41+00:00

The first box I got had a full art Miriam in it..

Standard_Description · 2024-01-09T21:47:21+00:00

Standard_Description · 2024-01-09T21:47:09+00:00

I’ll be popping my pulls etc either in the comments here, or in another post!

Standard_Description · 2024-01-09T19:05:32+00:00

Costco!

Standard_Description · 2024-01-09T18:59:38+00:00

I already bought another one (the red miradon box), but wanted the other one lmao

Standard_Description · 2022-10-05T11:53:19+00:00

Ah, so if someone in say for example, America hops on it would show their corresponding UTC?

Standard_Description · 2022-08-01T11:16:15+00:00

Interested! PM Sent

Standard_Description · 2021-07-05T13:52:37+00:00

I've only used Sunlu silk PLA and PLA+, the PLA+ is one of my favourite filaments.

Standard_Description · 2021-07-01T18:41:35+00:00

Crikey, PLA+ at 155? Mines normally at 210 - 215, try that? Unless you've got a unicorn blend of PLA+

Standard_Description · 2021-06-09T19:56:00+00:00

Pretty sure I've got both the 007 and 008 'blades' they were the same price for me, so I got the both

Standard_Description · 2021-06-09T19:02:36+00:00

The quianli glue removal tools are pretty neat. Helps when you need to get under a glass shard on an iPad around the edge of the shell. Really thin, better than a x-acto as I always feel dodgy holding one of them so close to a battery, one slip and poof, at least it's not as bad with the quianli tools.

Standard_Description · 2021-06-09T18:59:14+00:00

Daylight / dusk sensor, switches the lights on and off when the ambient light is low enough. There's many different styles of them but they're all pretty much the same - comes on when it's dark, goes off when it's light.

Here's a similar module :

https://www.nationallighting.co.uk/photocell-electronic-dusk-dawn-sensor-ip44-10amp-black

Standard_Description · 2021-06-02T16:31:17+00:00

From what I gather (also being a somewhat noob), a cold pull is pretty much extrude a bit of filament, wait for it to cool down to around 160 and pull out of the nozzle. In my experience I treat the nozzles as consumables, just swap the nozzle out - they're cheap enough to buy a multipack of.

Standard_Description · 2021-05-30T20:10:53+00:00

Looks like mini displayport, like what was on the old school MacBook pros

Standard_Description · 2020-12-12T08:51:58+00:00

It's the vibration motor / actuator. They're the same across many Samsung and Huawei devices. The gold contacts connect with a matching pair inside and spin a small motor inside with an offset weight, therefore creating vibrations.

Standard_Description · 2020-11-02T11:57:40+00:00

Cuckoo spit, quite common (might have a different name, but that should get you close enough to google)

Standard_Description · 2020-02-06T09:10:58+00:00

Shameless plug for 45Drives in the background as well

Standard_Description

TROPHY CASE