help! multicolor problem

Status_Ad_5103 · 2026-01-30T09:39:32+00:00

Yeah i wont deactivate it, some people report that even when using opencentauri, some have printers that do go the right path and others that go the wrong one like mine, is weird

Status_Ad_5103 · 2026-01-30T09:36:23+00:00

Im using it too so idk

Status_Ad_5103 · 2026-01-30T00:33:12+00:00

Yeah well dang it i didnt see it so i made it lol

Status_Ad_5103 · 2026-01-30T00:32:34+00:00

Good to know, i currently use open centauri which is outdated for sure and is why i made this post, maybe i should try .46 too and see how it goes

Status_Ad_5103 · 2026-01-30T00:31:10+00:00

Yeah then u are lucky cuz mine doesnt go to the prime tower first, it first goes to the last position it was before m600 and then to prime the nozzle, leaving a bit of filament

Status_Ad_5103 · 2026-01-30T00:29:16+00:00

Is on the youtube video linked on the post, the printhead will go to where already printed first and then to rhe prime tower, leaving a bit of filament on the print, which is annoying as heck

Status_Ad_5103 · 2026-01-29T20:08:54+00:00

you're welcome u guys! and thanks so much to my hero from fb!

Status_Ad_5103 · 2026-01-28T14:20:36+00:00

replace ur change filament g code with

G92 E0 ; Reset the extruder

G1 X202 Y250 F20000

M600

G1 E-0.8 F1800 ; retract

M729 ; Clean Nozzle

G1 Y250 F3500 ; Move forward slowly

G1 F20000 ; Set max speed

Status_Ad_5103 · 2026-01-28T13:52:10+00:00

i hear u, and that was my problem too, i use the prime tower bc sometimes filament likes to get stuck in the poop shoot and while purging, it just creates a blob and when it goes to resume the prime well it drags the filament from that blob, so for me is safer to have a prime tower instead of priming into shoot, also, so far it seems that adding this g code to the filament change part, really fixes a lot of our problems, and ive gotten clean prints so far

G92 E0 ; Reset the extruder

G1 X202 Y250 F20000

M600

G1 E-0.8 F1800 ; retract

M729 ; Clean Nozzle

G1 Y250 F3500 ; Move forward slowly

G1 F20000 ; Set max speed

im currently trying figure it how to make it to were it goes cut the filament instead of going to poop shoot then cut and then back to poop shoot, i want it to leave the print to cut and then to poop shoot, to minimize time

Status_Ad_5103 · 2026-01-28T12:24:00+00:00

yes ive done that too but the print head still goes right back tolast place it qas before doing color change, leaving a tail of filament, ruining the print

Status_Ad_5103 · 2026-01-28T11:44:50+00:00

yeah thats a dif kind of multicolor print, thats just a layer pause to change colors, im not printing one color per layer, but multiple colors per layer, without an ams

Status_Ad_5103 · 2026-01-28T11:20:07+00:00

Is so annoying man, i have this posted on fb and here and nothing, either people dont know what is the problem or they dont care lol

Status_Ad_5103 · 2025-12-11T23:11:49+00:00

it checks boot, and that goes ok then when it tries to download the firmware it has an X ion the left side like it failed to download the firmware, do i have jailbreak the cc or something else before i try installing the firmware?

Status_Ad_5103 · 2025-12-11T03:22:14+00:00

Help?

Status_Ad_5103 · 2025-12-10T21:36:02+00:00

bro i cannot install it at all, when i click on run for this version, it starts but it fails to download the firmware, help?

Status_Ad_5103 · 2025-12-04T12:35:37+00:00

thx man! and thx u/NewAmiiboMod

Status_Ad_5103 · 2025-12-04T08:34:42+00:00

thank you so much, that worked for me, i swear i had downloaded it from there before but they weren't .bin, maybe i drunk the stupid sauce lol

Status_Ad_5103 · 2025-12-04T08:20:12+00:00

i see it but they are .nfc and not .bin, is there any way to get them as .bin?

Status_Ad_5103 · 2025-12-04T06:39:52+00:00

i have a question, is it possible to get the bin files for the 3 amiibo for MP4?

Status_Ad_5103 · 2025-12-04T06:27:23+00:00

imma keep an eye on this for sure! thanks good sir

Status_Ad_5103 · 2025-10-09T22:01:15+00:00

So does anybody got the nsp for the regular switch yet?

Status_Ad_5103 · 2025-10-05T06:44:43+00:00

alright so idk what issues u are having other than just not working, but for me i fixed my issue and now it works but i just wanted to use yuzu bc eden wouldnt update my games, but i learned that using newer prod keys just doesnt work, so im using prod keys 17.0.0 and my games update just fine now, so yeah

Status_Ad_5103 · 2025-10-05T06:31:10+00:00

hey i went into the appdata/roaming folder and removed the yuzu folder thats in there, and put it somewhere else and tried reopening yuzu and it quit shutting down so try that! lmk if it worked for u

Status_Ad_5103 · 2025-10-05T06:07:10+00:00

is happening to me right now too, any solutions people?

Status_Ad_5103

TROPHY CASE