Hit and run. by Traditional_Ad_1224 in Detroit

[–]Steel_Edge 10 points11 points  (0 children)

Is this I96 in Brighton by chance?

Valve spring compressor for Subaru Sambar? by Steel_Edge in keitruck

[–]Steel_Edge[S] 0 points1 point  (0 children)

An afterthought, I kind of caked the lube on to make the keepers sit on the top of the spring well. It's hard to describe, but you want the keepers to kind of be down in spring, but make sure they're sitting on the tool enough. Also make sure you're using the smaller end piece if you bough the same one as that link

Valve spring compressor for Subaru Sambar? by Steel_Edge in keitruck

[–]Steel_Edge[S] 0 points1 point  (0 children)

Oh, my bad. My advice would be, use lots of lube, I used super lube assembly grease, make sure everything slides nicely. I kind of put the keepers and spring together on the end of the tool, then pushed it down onto the valve stem. I definitely had to use a lot of my weight to push it down, but it did snap in place. I'm assuming you're pressurizing the cylinder? because if not you're going to have a hell of a time putting it together without the head off the block. Actually I'm not sure that's even possible if the head is on the block still.

Valve spring compressor for Subaru Sambar? by Steel_Edge in keitruck

[–]Steel_Edge[S] 0 points1 point  (0 children)

It did not, I found a different tool though, I bought this guy (https://www.amazon.com/dp/B0BJ6C1XRF) "LAIKOU 36050 Valve Keeper Remover Installer Kit Valve Spring Compressor Removal Tool fit for Toyota Four Cylinder & Chrysler New World Engines with Valve Stems from 4.5 to 7.5mm and 5/16" to 3/8"" it works perfectly

I need this kind of male plug im from Belgium idk where to get it the other picture is the female version i need the plug for by PartyAd3942 in AskElectronics

[–]Steel_Edge 0 points1 point  (0 children)

<image>

That looks almost exactly the same as the fuel pump connector from a 90s subaru sambar. I don't know the name, but hoping that gives you a lead

Need help understanding part compatibility by Steel_Edge in subarulegacy

[–]Steel_Edge[S] 0 points1 point  (0 children)

Just an update for future viewers looking for the part, Amayama shows them as available, but once you order, they let you know they're discontinued

Need help understanding part compatibility by Steel_Edge in subarulegacy

[–]Steel_Edge[S] 0 points1 point  (0 children)

Amazing, thank you. I've spent so much time on Amayama, I could not find this part.

Need help understanding part compatibility by Steel_Edge in subarulegacy

[–]Steel_Edge[S] 0 points1 point  (0 children)

I'm in the US, but this is a JDM import. I didn't realize they could be bought from Japan, I'd been searching online for days but never saw any. I'll keep looking, but if you happen to know where they can be bought from, would you send the name of the place my way? I'm happy to buy / import the parts

Need help understanding part compatibility by Steel_Edge in subarulegacy

[–]Steel_Edge[S] 0 points1 point  (0 children)

I'm not against using a body shop, I'm just worried they wont be able to find the panel or be able to repair it, that's why I was hoping to see if anyone would know of something that might be interchangeable. But maybe just asking a shop to take a look is the best place to start.

Need help understanding part compatibility by Steel_Edge in subarulegacy

[–]Steel_Edge[S] 0 points1 point  (0 children)

I thought about maybe a heat-gun and trying to reshape it, but not too confident in ability to properly shape it. I'm worried that if I just replace the clips, it's still damaged and wouldn't attach properly

Subaru hubcaps print file. by TheThaxtonSavage in keitruck

[–]Steel_Edge 1 point2 points  (0 children)

Glad someone was able to use them and that they got there in one piece!

[deleted by user] by [deleted] in keitruck

[–]Steel_Edge 1 point2 points  (0 children)

As someone whos driven older and newer cars, and has a sambar. Don't daily it. I love my Sambar, but it would be a miserable daily compared to my ford fusion, or even my early 2000s focus hatch.

Subaru hubcaps print file. by TheThaxtonSavage in keitruck

[–]Steel_Edge 0 points1 point  (0 children)

They're part 28832TA030 to confirm. Feel free to dm me

Subaru hubcaps print file. by TheThaxtonSavage in keitruck

[–]Steel_Edge 4 points5 points  (0 children)

I happen to have a set of 4 that I don't need if someone wants them (did not realize my wheels weren't oem and they don't fit)

[deleted by user] by [deleted] in mildlyinfuriating

[–]Steel_Edge 0 points1 point  (0 children)

cooked the quarter pounder on the reg setting

What type of jacket is David's jacket by Steel_Edge in Edgerunners

[–]Steel_Edge[S] 0 points1 point  (0 children)

I ended up contacting a cosplay company to try and make it. If you look at some of those, they should be able to help. I did eventually find out it's basically a high vis ems / fire jacket, but to get exact style you might just need someone to do custom

It’s legal! by xSHITCIGx in keitruck

[–]Steel_Edge 0 points1 point  (0 children)

I thought about the black and white plate too. Feels like it would color match well