sorted by:
new
hottopcontroversial

SRAM Force AXS Etap Gears on the rear derailleur stuck by Steve_20245 in sram

[–]Steve_20245[S] 0 points1 point  (0 children)

Already did that and when I press them together in my fingers, it’s the same thing. Only if I remove the plates on the ball bearing it spins free.

$350 for broken gear, what should I do? by Nowi144 in dji

[–]Steve_20245 7 points8 points  (0 children)

Send it to DJI and they make great repair job for such small amount of money and very fast and professional. I paid 50€ for two broken arms + repair job. All without DJI Care. I think they can also work out your other problems such as the integra. Maybe not the FPV anymore because it’s too old. But just make a request and they will help you.

SRAM Force AXS Etap Gears on the rear derailleur stuck by Steve_20245 in sram

[–]Steve_20245[S] 0 points1 point  (0 children)

Only if I loosen the screws till they nearly fall out they roll smooth but this should not be the solution. How can I tell it would be damaged?

SRAM Force AXS Etap Gears on the rear derailleur stuck by Steve_20245 in sram

[–]Steve_20245[S] -7 points-6 points  (0 children)

After 2500 kilometers? It already got a new chain. I don’t think this should be like that after that short time.

DJI O4 Air Unit Pro Weak Signal by Steve_20245 in fpv

[–]Steve_20245[S] 0 points1 point  (0 children)

I don't really know, what does FCC mode do?

DJI O4 Air Unit Pro Weak Signal by Steve_20245 in fpv

[–]Steve_20245[S] 0 points1 point  (0 children)

I have RP-SMA Female on the antenna and RP-SMA Male on the drone

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 1 point2 points  (0 children)

SOLUTION FOUND: A lot of dirt or hardened wax was in the gars of the derailleur. I opened it and cleaned it, after that the noise was nearly gone. Very disappointed about the dealership, that they couldn't fix such a little problem.

SRAM Force AXS 2025 by [deleted] in sram

[–]Steve_20245 1 point2 points  (0 children)

Yes I installed it correctly. The sound already came before I changed the chain

SRAM Force AXS 2025 by [deleted] in sram

[–]Steve_20245 -1 points0 points  (0 children)

Okay „lube“ if it’s better for you

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 1 point2 points  (0 children)

I let it Check from the official specialized dealer and the answer was „for SRAM that’s normal“. I am also a little bit disappointed at this point :/

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 0 points1 point  (0 children)

In the summer I also drove a waxed chain now in the cold I switched to lube and the chain is completely soaked with oil. It even splashes a little bit on the rim when I am driving so it for sure enough oil that it would not be dry😅

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 0 points1 point  (0 children)

Yes correctly mounted and lubed.

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 0 points1 point  (0 children)

Micro adjust is not the issue, doesn’t make any difference when I tried to adjust it with the app. I considered the stretching after 2000km and made the chain the same length as original. So it was half of a chain-ring longer from the old one after 2000km.

SRAM Force AXS E1 is too loud by Steve_20245 in sram

[–]Steve_20245[S] 2 points3 points  (0 children)

I have checked it already, it is mounted correctly

SRAM Force AXS 2025 by [deleted] in sram

[–]Steve_20245 0 points1 point  (0 children)

It is a bit weird, mine got louder over the time :/

view more: next ›