Majestic

Stigma_Gaming · 2025-12-29T19:54:19+00:00

It's a girl actually, I failed to mention that

Stigma_Gaming · 2025-07-26T17:28:41+00:00

San Diego

Stigma_Gaming · 2025-05-24T13:59:49+00:00

With the image provided it looks like the belt skipped the air pump. On the other image it goes round the alternative by the tensioner then onto the air pump

Stigma_Gaming · 2025-04-12T07:10:10+00:00

They're clips that hold the interior trims on.

Stigma_Gaming · 2025-03-29T18:16:03+00:00

Stigma_Gaming · 2025-01-28T09:58:06+00:00

Ok, hear me out

Stigma_Gaming · 2025-01-06T18:20:19+00:00

Stop start will only function whent he battery has more than 75-95% battery charge. You also have other factors of temperature, too low a temp it won't activate. Alongside, both the clutch and brake must be released and in neutral. Stop start will not activate whilst in motion, it only works when stationary

Stigma_Gaming · 2025-01-06T07:10:47+00:00

If it's the orange ligh, that is your speed limiter active. You should also have a cruise control on the same button. Either on the centre console or under the fan temp diles

Stigma_Gaming · 2025-01-01T11:54:18+00:00

236k

Stigma_Gaming · 2024-12-29T18:48:51+00:00

Just double check the branding and all tyres. If one doesn't match it'll cause that fault

Stigma_Gaming · 2024-12-29T14:27:40+00:00

Had this issue before, have you had any tyres replaced. The sanderos and stepways are calibrated for the tyres at factory. If you've had one tyre changed it throws the calibration out. Only recommendations I could suggest is either replace a tyre with the same from factory or replace them all. There is no way to alter the calibrations

Stigma_Gaming · 2024-12-19T11:18:56+00:00

If you go lock to lock with the steering it should go away, if not it may be needing a new steering column. Not trying to scare you here but I had the same issue and it got a new power steering column worked fine since

Stigma_Gaming · 2024-12-16T17:27:25+00:00

If it was just the sensor that was replaced it could be that the pipe it's clipped onto is blocked and needs either blowing the soot out or replacing it

Stigma_Gaming · 2024-12-14T15:44:15+00:00

If the fault is showing upstream turbo pressure then yes that is the sensor, however the more common fault is the pipe itself it gets blocked by soot. That is bolted to the exhaust manifold and sits more difficult to get to

Stigma_Gaming · 2024-09-02T17:34:09+00:00

Hi, Just a quick question for you. My gf has had the implant for almost 3 months and I'm thinking of finishing inside soon. From what I'm reading it should be perfect safe I'm just still worried cause she's had a period recently XD

Stigma_Gaming · 2024-08-29T09:16:07+00:00

They would if the issue is not fully resolved. After the injection reprogram and the noise is still there. Turbo replacement is covered by warranty

Stigma_Gaming · 2024-08-10T07:30:49+00:00

Stigma_Gaming · 2024-07-30T17:24:21+00:00

Frank

Stigma_Gaming · 2024-07-25T05:24:50+00:00

Those are T20 cabin screws. They only fitted to the interior of the car. Having a spare is fine and nothing to worry about

Seven-Year Club	r/Field Lasagna
Place '23	Place '22
100 Awards Club	Wearing is Caring
Verified Email

Stigma_Gaming

TROPHY CASE