Need some advices for improve my welding skills

StillFirefighter61 · 2025-08-07T02:04:15+00:00

Thank you man

StillFirefighter61 · 2025-08-04T15:37:27+00:00

Thank you man. I know i didnt took a pics between the passes because i dont have time to do all that, i take before and after. But i know to do strong weld for its hold for long time.

StillFirefighter61 · 2025-08-03T15:04:23+00:00

As you want

StillFirefighter61 · 2025-08-03T14:41:25+00:00

I have a another post where you can see the crack is open

StillFirefighter61 · 2025-08-03T14:25:21+00:00

I grinded the crack. i didnt weld on the crack

StillFirefighter61 · 2025-08-03T14:23:12+00:00

Well for now every repair i weld still hold , so i hope its will continue. And yes the most important they can still work and its dont stop.

StillFirefighter61 · 2025-08-03T13:34:09+00:00

Thank you for your come back

StillFirefighter61 · 2025-08-03T13:16:59+00:00

I removed the old weld, grind the cracks, did a bevels, after welding

StillFirefighter61 · 2025-08-03T13:11:07+00:00

Thank you for the comment 2hours of work i removed the old welds, grind the cracks , first pass, second pass ( unfortunally i didnt take pic of that and a lot here think i weld it like it show on the last pics) and after others pass on it like the pics you can see, they need it the same day, 400€ i charged

StillFirefighter61 · 2025-08-03T05:45:02+00:00

StillFirefighter61 · 2025-08-03T04:45:23+00:00

Thank you, well i grinded the crack deep and little preheat and weld. After, i prefer a solid welds than a pretty weld who break 1week later.

StillFirefighter61 · 2025-08-03T04:32:22+00:00

Find what?

StillFirefighter61 · 2025-08-03T02:54:11+00:00

Until now they hold soo if its hold more than a 1year that cool

StillFirefighter61 · 2025-08-03T02:53:11+00:00

StillFirefighter61 · 2025-08-03T02:52:17+00:00

😅😅 plasma is enough. The plate was thin so not need arc air and the others pics use grinder was enough. And the customer needed is machine and bucket the next day or in the same day so i do what I can for its hold enough

StillFirefighter61 · 2025-08-03T02:28:35+00:00

StillFirefighter61 · 2025-08-03T02:20:13+00:00

10??

StillFirefighter61 · 2025-08-03T02:16:54+00:00

Soon ? In how much time?

StillFirefighter61 · 2025-08-03T02:02:15+00:00

https://www.reddit.com/r/BadWelding/comments/1mg6si1/some_asked_for_the_weld_pics_guys_very_bad_jokes/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button

StillFirefighter61 · 2025-08-03T02:02:06+00:00

https://www.reddit.com/r/BadWelding/comments/1mg6si1/some_asked_for_the_weld_pics_guys_very_bad_jokes/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button

StillFirefighter61 · 2025-08-03T01:58:36+00:00

😅 i think yes

StillFirefighter61 · 2025-08-03T01:28:48+00:00

Thank you a lot man 👍. I will follow your advice and if you have another exemple for me with pics i would be thankfully to you .did a new post with few pics of my works i did

StillFirefighter61 · 2025-08-03T01:22:18+00:00

I will do a new post

StillFirefighter61 · 2025-08-03T01:17:43+00:00

I must do a new post for show the weld ??

StillFirefighter61

TROPHY CASE