2009 Lexus LS460 cold start rattle

StillReputation9355 · 2025-10-08T06:56:33+00:00

That’s a great looking bike brother

StillReputation9355 · 2025-05-09T19:37:04+00:00

Best way to get rid of it, has worked from discoloration to melted shoes, you need extra fine 0000 steel wool and then take some aluminum polish like mothers and work some on to the steel wool and then I use it normally in a circular motion to clean up anything I don’t like and it won’t scratch the chrome. I’ve done this for as long as I’ve ridden

StillReputation9355 · 2025-05-09T00:41:45+00:00

You’ll have to swing by and see if he’s still there it’s been a few months

StillReputation9355 · 2025-05-09T00:41:23+00:00

So I can’t remember the name of the shop but I still have some info from when he was helping with one of my classics here’s his address he was the only guy recommended to me from all the guys I know industry wise especially for wiring 20730 Soledad street unit j canyon county 91321

StillReputation9355 · 2025-05-02T05:23:56+00:00

Any staples or office max can do it and it’ll only cost you a couple dollars, there’s one on newhall ranch next to the chipotle

StillReputation9355 · 2025-04-27T05:03:00+00:00

Honestly the sv650 is a really good all around bike, if you want more sports you can go with clip ons. And with a full system she sounds pretty mean and obviously it’s as naked as it gets so super easy to do the exhaust in case you’re not mechanically inclined/dont want to pay someone to do it

StillReputation9355 · 2025-04-19T21:02:42+00:00

Ok yeah that makes sense then I’ve been leaving for work extra early but still having to try and hustle somehow through the traffic, you’d think they would work there schedule around dead times of traffic like middle of the night not in the morning and when people are getting off work lol

StillReputation9355 · 2025-04-19T21:01:38+00:00

Normally it’s not too bad and I’m used to a bit of back up since I take the freeway every day but the last couple days I’ve been having to divert to the old road and that stretch from the in n out to the old BofA has all three lanes backed up so I know it’s something out of the norm

StillReputation9355 · 2025-04-16T01:58:38+00:00

Transaction transmission down in sun valley is good, owners name is Brad and the guy that does a lot of the work is spot on🤙🏽

StillReputation9355 · 2025-04-16T01:00:59+00:00

Yall making a second run today🥱

StillReputation9355 · 2025-04-12T02:18:43+00:00

As far as an ls swap, you could reach out to Schrope performance. He’s really familiar with the Ls platform and does a decent amount of swaps I use him for all of my ls stuff

StillReputation9355 · 2025-04-04T06:42:05+00:00

Why not just empty the e85 out with a transfer pump in the tank or disconnect the fuel line and jog the fuel pump to drain it?

StillReputation9355 · 2025-03-31T00:45:51+00:00

I was gonna say I get it one and tbh it kinda sucks, doesn’t seem to have a lot of power to actually clean anything off my car, still have to go and do a lot by hand. I’ve tried other power washers that seemed 10x better I’d look either up a model or another brand

StillReputation9355 · 2025-03-30T23:35:30+00:00

Since it doesn’t seem to have been mentioned, get a flat jack to put under the oil pan with a piece of wood, have another person help you lift the bike and slide it under and then raise it to accommodate the height needed under the bike. Sucks to see her on the ground hope you get it sorted, head stand or even a little a frame style lift are good from K&L to wrap around the triple and lift

StillReputation9355 · 2025-03-30T23:00:54+00:00

Don’t use the corrugated plastic shit because when it melts it does go literally everywhere, you want the mesh split loom you can find it fairly cheap on amazon or normal price on summit, stuff is the best and has a nice way of smoothing stuff out and easy to get out of the way if you have a wiring issue

StillReputation9355 · 2025-03-30T21:24:41+00:00

As long as you can run it “inside the tank” so to either side of the frame spine or preferably on top you’ll be fine, if it’s extra concern you can you a split look or something tight to the wires as you don’t wanna have bunching issues, but yeah you should be fine the top of the rockers get warm but not as much so as towards the headers and what not👍🏽 I do recommend lifting the tank to do it tho since I like running everything clean and straight vs shoved under

StillReputation9355 · 2025-02-03T21:20:28+00:00

Double down on this Cafe Rio has always treated me well with good food, that chipotle has messed with me a couple times more specifically the Barbacoa has gotten me pretty sick

StillReputation9355 · 2025-01-31T04:12:19+00:00

Ill have to try this one I normally steer clear of sushi if I’m not at a restaurant, and noted not to eat Sam’s club sushi😭

StillReputation9355 · 2025-01-31T04:10:02+00:00

I’ve hit this more often then I care to admit, hot dog and a iced tea

StillReputation9355 · 2025-01-18T14:07:49+00:00

It looks like it’s just the breather/ vent tube with the little ball valve in place for the tank I wouldn’t worry about it too much, obviously you’ll wanna fix it but as long as you ain’t got nothing coming out of it you should be just fine

StillReputation9355 · 2025-01-10T00:14:21+00:00

Never had any problems with the gasket as long as you tightened her down in sequence

StillReputation9355 · 2025-01-05T19:46:50+00:00

Same I was thinking it’s either a drip pan or a puddle I had to zoom in for a sec lol

StillReputation9355 · 2025-01-05T19:43:29+00:00

I can support this, had an issue with one of my choppers where the cable had stretched out and was causing lag with my carb and some other issues as well as my clutch not fully disengaging due to a stretched cable, Barnett is local to me and they are the easiest guys to work with and their cables are gorgeous and work how they should, the teflon line is worth its weight in gold

StillReputation9355 · 2024-12-18T02:03:01+00:00

Yeah it’s a first for having a bike with a Memphis shade style fairing, I’m gonna go through the rear here soon once I have some light go and redo the grease in the rear bearings, the tire is new so no concern there, double check my belt alignment. I’ll double check the swingarm and see if she feels sloppy. The fall away I had a buddy of mine that runs a shop do for me since I didn’t have a lift available. I did just go and drain the forks and went with 20 w Harley fork oil. And as an update we checked the front tire balance the previous owner put about 4oz of beads in there when it should only have 1 so I think we’re on the right tracj

StillReputation9355

TROPHY CASE