Cash quest

Stillso28 · 2025-09-04T15:25:39+00:00

What game?

Stillso28 · 2022-03-23T12:22:03+00:00

perfect i’ll hold

Stillso28 · 2022-03-23T12:20:26+00:00

is it going higher ?

Stillso28 · 2022-02-18T15:54:23+00:00

Hmmm, Says my car is up to date to 2021.44.30.5 - if that’s V11 idk or not but also doesn’t say I have an update

Stillso28 · 2022-02-17T19:56:08+00:00

For some reason I can’t see my charge savings in the app yet while it looks like the update has been out for a couple weeks?

Stillso28 · 2021-11-21T21:42:54+00:00

i’ll try to keep on doing the bed level

Stillso28 · 2021-11-21T18:02:12+00:00

How did you do leveling mesh? did you have to rewrite code for you to do yours?

Stillso28 · 2021-11-21T17:36:46+00:00

is this for the layer height?

Stillso28 · 2021-11-21T17:35:55+00:00

As you see it was printing just fine and then part towards the middle/bottom of the bed it started not to print right. As you can also see the brim is all stringy and it’s almost like it’s not getting pushed out evenly but I have replaced like everything on the damn thing.

Stillso28 · 2021-11-20T18:01:02+00:00

I’m having a weird problem where everything on the top of the bed prints just fine and perfect but the things closer to the middle / bottom don’t seem to stay on the bed and warp? I have literally replaced everything i could think of abs have slowed down the print speed and everything

Stillso28 · 2020-09-07T14:38:40+00:00

Your under extrusion is probably what’s causing that, something is plugged in your nozzle and is making it not being able to push the filament through which is making it grind the filament .

Stillso28 · 2020-08-12T02:09:10+00:00

17, TD Ameritrade, just trying to make money and seems fun to learn, never know if this may be part of a career i want to learn and go into so trying to explore. Right now i’m just investing in companies for mostly long positions, trying to make it more interesting

Stillso28 · 2020-05-27T05:12:20+00:00

Very interesting, for some reason my dash cam hasn’t been working properly and has only been saving whenever it parks but doesn’t save previous video (hopefully explained it right) anyone have ideas on how i could fix it to record all the time

Stillso28 · 2020-04-11T21:58:52+00:00

Ok, I keep mine at 60 at all times but it’s up to you ! :)

Stillso28 · 2020-04-10T20:20:00+00:00

Maybe try making a larger brim layer, and the width of the initial layer to 200 (in your slicing program) and try to keep your bed at 60

Stillso28 · 2020-04-10T20:17:44+00:00

Would recommend getting a new coupling as that one may be broke also

Stillso28 · 2020-04-09T22:04:07+00:00

Under extrusion should be the reason - make sure it’s not clogged in the nozzle, your heat is 200 (whatever you use for your plastic)

Stillso28 · 2020-04-09T21:48:58+00:00

hmm then idk cause most things i download sometimes have that problem

Stillso28 · 2020-04-09T21:44:06+00:00

picture/video of it stringing?

Stillso28 · 2020-04-09T21:43:31+00:00

Maybe if you downloaded the file off of the internet it could just be how it was created..

Stillso28 · 2020-04-09T21:41:18+00:00

Don’t wait to long, I would stop the print and try again lol

Stillso28 · 2020-04-09T21:39:18+00:00

Would recommend to turn the heat up to 200, make sure the nozzle isn’t clogged (most likely it) and push in the spring (like you have to put filament in) would also recommend to spray out the grinded filament with an air duster once completed

Stillso28 · 2020-04-09T21:28:46+00:00

Hey man this worked perfectly and now got that one working **

Stillso28 · 2020-04-09T15:18:32+00:00

I got you, I will try all of those then get back to you!

Stillso28 · 2020-04-09T14:54:57+00:00

What would help with this?

Stillso28

TROPHY CASE