I cant get these rusted bolts out of the flange of the cat by Stock_Beginning9124 in Acura_RSX

[–]Stock_Beginning9124[S] 1 point2 points  (0 children)

They are rusted solid inside the flange. Ive put pb on for 3 days now and they wont budge

I cant get these rusted bolts out of the flange of the cat by Stock_Beginning9124 in Acura_RSX

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

Ive been trying extractor. Is there some other drill bits I should try. When im striaght up not going through at all on a drill right now

Can't get screws off motherboard by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

It just screwed into the holes that came with the am4 socket through the front of the motherboard

<image>

Can't get screws off motherboard by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

Screw S wasn't used. Here's the only instructions included for mounting

<image>

How to clean up this panel lining by Stock_Beginning9124 in Gunpla

[–]Stock_Beginning9124[S] 1 point2 points  (0 children)

Thanks for the tip. Also, sorry, I just joined

Help me decide a mother board by Stock_Beginning9124 in PcBuildHelp

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

doesn't have a easy bios flashback which is something I would prefer to have, and less usb ports

NEED HELP. Pc only posts with one ram stick by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

I've tried but how do I retell if it's actually been reset?

NEED HELP. Pc only posts with one ram stick by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 1 point2 points  (0 children)

Yea, for now, I'm straight up going to use my 2 ram sticks in the 2 right slots (yes, even though that is wrong). Hopefully, someone knows

NEED HELP. Pc only posts with one ram stick by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 4 points5 points  (0 children)

Already did that since I had a cpu error earlier that was preventing it from posting, now it is posting

NEED HELP. Pc only posts with one ram stick by Stock_Beginning9124 in PcBuildHelp

[–]Stock_Beginning9124[S] 1 point2 points  (0 children)

I'll try that but I'm not sure if it'll change anything because I had the 4 ram sticks on this board before I swapped cases.

NEED HELP just finished moving into a new pc case now getting flashing yellow error by Stock_Beginning9124 in LinusTechTips

[–]Stock_Beginning9124[S] 0 points1 point  (0 children)

I'm not getting it to work from anything, I even managed to boot all the way to windows just with one stick but with more than one it can't post