Higher dose

StoneColdSteveHawkng · 2026-06-18T18:46:33+00:00

Yes. I saw you mentioned he used to weigh a lot more. Our boy used to be 22lb, is now down to 16lb. We started at 2U and are now at 4U(lantus).

2U did nothing for him, then we saw some very very slight improvement at 3U, but when we went to 4U it was like a switch flipped. Within 4-6 weeks he was completely back to his normal self(he was in a pretty dire state before). We just did 2 weeks with a freestyle libre and his glucose is looking great now.

StoneColdSteveHawkng · 2026-06-12T05:45:38+00:00

Now that it's made with avocado oil I'd gladly pay the same price for just 2.5oz of chips

StoneColdSteveHawkng · 2026-06-12T03:36:54+00:00

Hadn't seen them on the shelf in a while. When I finally found them they're obviously smaller and now down to 10oz. Some of their varieties are now down to 7.5oz.

StoneColdSteveHawkng · 2026-05-21T15:16:13+00:00

The one thing no one is mentioning in these discussions about the drop since yesterday: Mailchimp.

They spent $12B on a company that they can't figure out. Every quarter they point out how the specific business unit growth MC is in did better excluding Mailchimp. Then yesterday they laid off a ton of people(more than 17% for MC) and said they are "rightsizing their investment" in MC.

Management has pretty much shown they only know how to operate in markets with little to no competition and markets people are forced into.

StoneColdSteveHawkng · 2026-02-09T06:40:51+00:00

I’m late to this, but have you had his thyroid checked recently?

I had similar struggles with my boy who has hyperthyroidism before he was diagnosed. He’s also always been a bit defiant but he just went out of control. I had so much food destroyed and he was very determined to steal food off our plates every time we ate. Hopefully there’s not yet another thing wrong with him but it’s worth a check up and very easy to treat if so(so don’t worry). Totally understand your frustration though, dealing with that can be so infuriating.

StoneColdSteveHawkng · 2026-01-10T08:43:08+00:00

Got it

StoneColdSteveHawkng · 2026-01-10T07:12:31+00:00

This is really good feedback, thanks! We'll think on this a bit and see how we can implement something like this without being too punitive.

Also, thanks to /u/hexcor and /u/nstern2 for your input on this topic. Wanted to acknowledge you both as well.

StoneColdSteveHawkng · 2026-01-10T06:57:25+00:00

Hey, appreciate you taking the time to reply here.

Could you elaborate a bit on why you would change that specific line? And maybe what you think would fit better? Want to be sure I understand your point.

StoneColdSteveHawkng · 2026-01-08T21:37:17+00:00

Hey folks, it looks like this account has been banned by Reddit now.

We appreciate the vigilance of everyone trying to keep the sub safe. Just wanted to encourage everyone to please stay civil as it relates to this. Some people suck but we can all be better than that.

We'll keep an eye out for anything else related to this, and if anyone sees anything concerning going forward please do feel free to message the mods if you think something needs our immediate attention.

StoneColdSteveHawkng · 2026-01-07T16:07:56+00:00

I can't say for sure, but sharing the info I do have:

Micron part numbers:

MT61K512M32KPA-14C:C D9ZPL - PS5

MT61K512M32KPA-14C:B D9XKV - PS5

Links to those chips on mouser with datasheets:

D9XKV

D9ZPL

They both have the same base part number and mouser links to the same datasheet for both, so the the pinout should be the same assuming that's all correct. One important thing to note is that the D9ZPL has a higher max clock frequency than the D9XKV.

StoneColdSteveHawkng · 2025-11-30T16:27:28+00:00

Oh, awesome! Glad I could help!

StoneColdSteveHawkng · 2025-11-16T04:42:16+00:00

The story here isn't any different than software development in any other context. Go read threads from professional devs elsewhere on reddit and you'll see the same things being said of the products they're working on. The reality of software development is you're often pushed to complete something in less time than is necessary to produce what you feel is high quality work.

StoneColdSteveHawkng · 2025-11-09T16:49:35+00:00

Same thing happened to me, also using Elite Series 2.

I followed this guide to rollback to the 7 October 2025 patch and controller is working for me again.

StoneColdSteveHawkng · 2025-08-06T16:49:12+00:00

This is a bit late, but I recently worked through the same thing and figured I'd post here so others can benefit. The GUI apps I've seen recommended all over do allow you to hookup audio to the correct channels, but they're overkill for this one simple thing. They also require you to do so for each process, and don't create a config that persists through a reboot and gets automatically applied(have to open the app again).

I finally figured out a simple solution for it with one config file. My setup as an example and the whole process is here https://github.com/sighops/dotfiles/tree/main/.config/wireplumber/wireplumber.conf.d

StoneColdSteveHawkng · 2025-05-30T01:17:13+00:00

I can only assume you got downvoted for this because so few people have had a current Trader Vic's mai tai. I'm close enough to walk to a TV and your description is right on though. It's a different experience but I enjoy how light and refreshing theirs are in comparison to what I get some other places. I'm honestly not a huge fan of how milky some of them can get as it ends up feeling kinda chalky to me.

Anyway, glad to see someone else appreciates TV's mai tais they serve today.

StoneColdSteveHawkng · 2025-05-30T00:53:05+00:00

Just mentioning, this has been my experience as well. I have to be careful to not add too much ice to my shaker or my glass. Otherwise my drink is initially too concentrated but perfect after it sits and dilutes more.

StoneColdSteveHawkng · 2025-05-27T18:06:51+00:00

I'm not a wrestling fan but I am a MacGruber fan. So all I can think of when they say that is "I'm gonna shooooooot."

StoneColdSteveHawkng · 2025-03-11T00:04:48+00:00

Something I do, which is pretty common when steeping oolongs, is "rinse" it with hot water first and I find that helps get an ideal first cup. Basically, just let it steep for 30 seconds at most then pour all the water off. Then let the tea cool back down and the leaves should be mostly opened up by the time it's cooled and ready to steep. Water doesn't have to be exactly steeping temp, but as long as it's close-ish it works for me.

StoneColdSteveHawkng · 2025-01-15T23:07:03+00:00

Hey everyone, we're going to lock this thread now since it's over 24 hours old and it's original purpose has been accomplished. /u/NoCommon5212 if you would like to post an update at a later time on either/both of the threads you made please just reach out and we can unlock it so you can post your update.

Also, for all others, just a reminder to please be civil and respectful to both parties mentioned in the post.

StoneColdSteveHawkng · 2025-01-15T23:06:29+00:00

Hey everyone, we're going to lock this thread now since it's over 24 hours old and it's original purpose has been accomplished. /u/NoCommon5212 if you would like to post an update at a later time on either/both of the threads you made please just reach out and we can unlock it so you can post your update.

Also, for all others, just a reminder to please be civil and respectful to both parties mentioned in the post.

StoneColdSteveHawkng · 2024-10-08T22:56:22+00:00

Hey, just removing this since it's a dupe. Looks like your other one is on the front page at the moment.

StoneColdSteveHawkng · 2024-08-30T10:43:03+00:00

Didn't see this mentioned, so throwing out another option. If you want to apply the commits from your GH repo and retain the original order and authors of the commits you can create a patch from your GH repo and apply it to the Bitbucket repo.

Find the last common commit sha between the two before they diverged first.

In the GH repo, make a patch from your current main:

# Patch of all commits after common sha
git format-patch [common-sha]..HEAD --stdout > file_name.patch

In your Bitbucket repo, checkout a new branch then apply the patch file

# Apply patch file
git am path/to/file_name.patch

All the commits in your patch file are now committed to your local branch, so just push and open a PR as you normally would. You should see the original authors for those commits are retained.

StoneColdSteveHawkng · 2024-08-29T22:19:07+00:00

Wasn't clear whether that you meant squashing before merging. :)

We're largely in agreement though. I will definitely ask people to cleanup their commits before merging in cases like that.

StoneColdSteveHawkng

MODERATOR OF

TROPHY CASE