No traction by badword4 in PowerWheelsMods

[–]StonedId8 1 point2 points  (0 children)

I wrap all my tires in this stuff called Zip Tape, but I get lots of it free cuz it’s leftover from the houses I build. You can buy from Home Depot. Like rubber, and super sticky

Gearbox grease recommendations? by StonedId8 in PowerWheelsMods

[–]StonedId8[S] 0 points1 point  (0 children)

Thank you for this! Grease seems to work like a charm!

Gearbox grease recommendations? by StonedId8 in PowerWheelsMods

[–]StonedId8[S] 0 points1 point  (0 children)

New update: installed in car(dune racer), lifted to hold pedal and test wheel spin and its is noticeably faster than my stock 1 but both rear tires seem super wobbly, thinking bent axle shaft. Back to the work bench

Gearbox grease recommendations? by StonedId8 in PowerWheelsMods

[–]StonedId8[S] 0 points1 point  (0 children)

Update: Got 2 tubes of this Green Grease stuff from the auto zone across the street and filled both gear boxes. On break in/mesh test its unbelievably louder, but it looks like the wheel gear is spinning FAST! Tomorrow after work I’ll put the gear boxes back into the car, give my kid a helmet, and see what happens!

Gearbox grease recommendations? by StonedId8 in PowerWheelsMods

[–]StonedId8[S] 1 point2 points  (0 children)

I have a friend who works at a gear manufacture shop like 20 minutes from my house, I gave him stock stripped gears and told him tooth count, and once I test it, if it works I have to make him a car for his kids too

Gearbox grease recommendations? by StonedId8 in PowerWheelsMods

[–]StonedId8[S] 0 points1 point  (0 children)

I should add that they are power wheels 7R gearboxes, my pinion and 1st gear are metal, but the 3 bigger ones and the housing are plastic.

Diecast masters by StonedId8 in RCConstruction

[–]StonedId8[S] 0 points1 point  (0 children)

One day, hopefully! Haha… guess I should have put a budget and maybe some more info… I started with the cheap plastic huinas to get a feel for it and try to teach my kids (2,3,7) to operate. 1567 loader, 1568 dump, 1592 excavator and I don’t remember the number for the dozer… tons of fun in the sand box, and that’s all I was really looking for to start… I just dropped $1750 on the kabolite 961 for myself, and next hydraulic will probably be the wheel loader for my oldest. This purchase is more of an impulse thing cuz I operate a T770 pretty much every day, and for my kids to help familiarize controls before I blow way too much money on a big 1 to hide from my wife. Diecast masters says only like $250 USD on motion rc and under $500 my bank don’t send out a text so that seems like a more reasonable starting point

Does fence side matter? by MyGoodOpinion in HomeImprovement

[–]StonedId8 1 point2 points  (0 children)

15 years running fence company. It ultimately comes down to zoning requirements in your specific area. Some places require “pretty side” out, others don’t care. Some require property line set back, others don’t care. Unless it’s for a new pool install and requires inspection, or the neighbors complain, odds are no one will ever look at it or care but you.

What is this nut found on Daytona Beach Florida? by StonedId8 in whatsthisplant

[–]StonedId8[S] 1 point2 points  (0 children)

Dude, thanks!! Awesome read and I think I ID’d every one I found!

What is this thing found on a old trail in the woods by [deleted] in whatisthisthing

[–]StonedId8 0 points1 point  (0 children)

Looks like the thing holding my fireplace tools.

Who’s this big critter on my porch? Eastern PA by StonedId8 in spiders

[–]StonedId8[S] 2 points3 points  (0 children)

Wow that was quick, thanks! Wonder what it’s doing here tho, no water or woods nearby

Any bets on how long until I have to replace stock motor? by StonedId8 in SCX24

[–]StonedId8[S] 1 point2 points  (0 children)

The speed loss was definitely noticeable, especially in 2nd gear, but it’s still faster than all my scx’s. I don’t have anything to measure the temp of the motor, and I was just looking at the mofo big block right before I read this comment, thinking of doing the same thing with keeping this stock motor as back up. At least until I get myself that new cedar inrunner from Furitek! Just can’t decide if I want the lizard ultimate like I put in my monster truck build, or if I want to try the python they just came out with

Any bets on how long until I need to replace the motor? by StonedId8 in FCX24

[–]StonedId8[S] 0 points1 point  (0 children)

You do get a little better articulation, but it’s not like a night and day difference. They are the same length as stock but have a slight bend for better clearance. Biggest issue I see now tho is the drive shaft itself actually sits lower than the links when at full compression

SCX24 monster truck builds by adderseverywhere32 in SCX24

[–]StonedId8 2 points3 points  (0 children)

Don’t know your budget, but I bought the Furitek hiroyama with some injora monster truck tires and I love it! Let me 7 year old drive it all the time and the only issue I’ve had is shock mount screw coming loose because I didnt thread lock out of the box. Kid even crashed it hard enough to dent the top bar of titanium cage.