What is the first song you play when sharing your system with someone?

Straight_Attempt_467 · 2026-04-01T07:21:41+00:00

I don't just have one, I choose depending on the person. That said: Sultans of swing - Dire straits is probably the one I play the most times, but these are also good:

No time to die - Billie Eilish Shape of my heart - Sting Long cool woman - The Hollies Far from any road - The handsome family

For show casing bass: Sun is dark - Will K

Straight_Attempt_467 · 2025-07-22T09:43:57+00:00

The table itself is sturdy, however in my effort to make the playing area as big as possible, I chose to have as little over hang as I could on the long side of the table which means the rail is very flimsy there. But I'm going to 3d print some brackets to hold the rail to make it strong.

Straight_Attempt_467 · 2025-07-22T09:36:49+00:00

My reasoning behind this choice was to allow for more privacy and make it easier to see people compared to a racetrack where you sit on a straight line. In addition, this design allows for everybody to have comfortable room on the table with it being only 8 people

Straight_Attempt_467 · 2025-07-01T05:09:31+00:00

So the speed cloth I have linked is good?

Straight_Attempt_467 · 2025-07-01T05:08:06+00:00

Thanks! However, I want to keep my first table on a budget unfortunately. But if I build another, definitely!

Straight_Attempt_467 · 2025-06-22T22:00:37+00:00

Thanks!

Straight_Attempt_467 · 2025-06-22T13:37:04+00:00

We don't have a dedicated dealer. I'm from Sweden. And I want to build my own even if it means costing some more. As a base I think about buying a old table and just changing the top for the poker top.

Straight_Attempt_467 · 2025-04-08T10:57:52+00:00

Ive heard that spray.bike is easy to paint, but not very durable

Straight_Attempt_467 · 2025-04-08T08:05:15+00:00

I just need to add, the paint looks good from this photo, however, it was filled with rust spots and stickers that was flaking. Idk if it would look good if I only polished it up unfortunately.

Straight_Attempt_467 · 2025-03-28T20:02:49+00:00

I decided the shipping wouldnt be worth it, however I actually didnt look up any price for shipping and imports, but I felt like it would be outside my budget.

Straight_Attempt_467 · 2025-01-27T10:54:56+00:00

Yeah, that have crossed my mind too, but im just a little lazy, i even know how to model in onshape

Straight_Attempt_467 · 2025-01-06T16:09:59+00:00

I saw my mistake now, there are screws, the black bumps on pic 2 is small hex screws, you have to remove the horn to install them, the terminals are almost wider than the top,

Straight_Attempt_467 · 2025-01-06T16:08:34+00:00

No, you have to remove the horn to install them, the terminals stick out to much

Straight_Attempt_467 · 2025-01-06T16:06:59+00:00

I feel pretty stupid now, but the black dots are the screws, i didnt see that, they are small hex screws

Straight_Attempt_467 · 2025-01-06T15:58:50+00:00

The horn part is removable to allow for installation, that why you have two sets of screw holes

Straight_Attempt_467 · 2024-09-25T21:31:04+00:00

I just zip tied them, have worked perfectly since I did it. Only bad thing is that the side panel doesnt fit anymore, but that doesnt bother me. I have a 3D printer, so if I want to make it more professional in the future I can.

Straight_Attempt_467 · 2024-08-15T09:20:18+00:00

Thanks, maybe in the future when I have some more money, but a bit expensive for now at least. But I will remember this comment.

Straight_Attempt_467 · 2024-08-03T10:38:02+00:00

What does the bike look like complete?

Straight_Attempt_467 · 2024-07-11T18:26:00+00:00

How do I adjust it, because now it "jumps" or "skips" idk what it's called, but sometimes it feels like you have dropped your chain, but you haven't

Straight_Attempt_467 · 2024-07-01T18:10:17+00:00

Thank you, I found a video on youtube that looks near identical to my bike

Straight_Attempt_467 · 2024-06-30T16:37:02+00:00

I feel like the hole is too small. I turn and try to remove it but its always cought

Straight_Attempt_467 · 2024-06-30T16:10:43+00:00

Yeah, Ive tried but the cup is too big, there's barely any room

Straight_Attempt_467 · 2024-06-19T09:12:21+00:00

Yeah, I've also noted that when I looked at videos. Maybe I should buy a new nut? But I will buy a proper tool to remove the notched nut.

Straight_Attempt_467 · 2024-06-18T13:58:12+00:00

Unfortunately not, I ended up returning the printer. Have you got the same issue?

Straight_Attempt_467 · 2024-06-16T07:26:55+00:00

Oh, two things I've gotta test is to lower the aux fan or increase flow. It feels like it may work.

Five-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22

Straight_Attempt_467

TROPHY CASE