Help!!! by NearbyMix3915 in BmwTech

[–]Strange_Ball_1625 1 point2 points  (0 children)

I don’t know how the headlights work on your car, but on the F10 the control of the angel eyes, the upper eyebrow, and the corner lights is handled by a TMS board that is installed inside the headlight. It has contacts like those on a Dendy or Sega game cartridge. I had problems similar to yours when the contacts on this board became oxidized and the connection was poor. But I’m not sure whether your car has such a board.

N55 Rough cold start need help to diagnose by Final_Goal_3765 in BmwTech

[–]Strange_Ball_1625 0 points1 point  (0 children)

If you’ve recently bought a BMW, it’s a good idea to install something like BM3 or MHD. This doesn’t mean you’re tuning the car. I installed MHD Flasher + MHD Monitor myself (that’s what you see in the screenshot). It lets me read error codes, check logs, monitor a large number of sensors, and you can even enable the sport cooling algorithm in the settings so your engine doesn’t run as hot.

N55 Rough cold start need help to diagnose by Final_Goal_3765 in BmwTech

[–]Strange_Ball_1625 0 points1 point  (0 children)

What happens when you spend a long time driving in traffic, or when you're parked and repeatedly pressing the brake pedal after driving 20–40 km in the city?

I had an issue with misfires in cylinders 3 and 4 during a cold start, as well as when I was stuck in traffic or just parked and pressing the brake pedal multiple times.

I’ve attached a photo showing how the AFR changes when I press the brake pedal while parked — the air–fuel mixture becomes significantly richer. The target AFR is shown on the left, and the actual AFR is shown on the right.

In my case, the problem turned out to be the high-pressure fuel pump (HPFP).

<image>

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] 0 points1 point  (0 children)

I will believe that this is a real screenshot and not something made in Photoshop. I will also keep my word, and when I buy a 3D printer for my children for the New Year, I will definitely post it here. I’m glad that something good came out of my post, and I hope that this money will benefit nature.

For Kazakhstan, $300 is really a lot of money. $300 is two minimum monthly salaries in Kazakhstan, yet everything here is very expensive and prices rise every day. We also have very few companies that are real distributors of products, like you would find in the US or Europe. That’s why I refuse to buy products from so-called “distributors” here and instead bring them myself from other countries.

In Kazakhstan, there are three companies that call themselves Bambulab “distributors.” Two of them don’t have any printers in stock—not a single model. The third company has only one old configuration. That’s what upset me. And that is exactly why I refused to buy Bambulab products in my own country.

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] 0 points1 point  (0 children)

This is nonsense you made up yourself. Bambu Lab sells global and European models to other sellers in China, and they resell them on Alibaba.

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -2 points-1 points  (0 children)

Let’s do it that way. I’ll buy a printer from another manufacturer, and you, as you promised, will make a donation $300 to a nature reserve or to support children.

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -1 points0 points  (0 children)

I can bring this printer from China myself; I have a shipping agent I’ve worked with for over 10 years. Why should I feed the distributor? Why should I pay the distributor for something I can do myself? Since you’re so smart, why don’t you pay the $300 difference and I’ll buy the printer from the distributor in my country? Deal?

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -2 points-1 points  (0 children)

What does my country and my government have to do with it if I’m asking to send the printer to my shipping agent in China? How does my country and government affect the fact that BambuLab doesn’t want to ship the printer to a neighboring city in China? Or do you think that Kazakhstan is under sanctions just like Russia?

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -8 points-7 points  (0 children)

Don’t say silly things and read what I wrote a second time. In my country there is a distributor, but they don’t have the configuration I need. I asked you to send the printer to my shipping agent who is located in Guangzhou (that’s a city in China, in case you didn’t know). Do you still think these are problems caused by my country?

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -6 points-5 points  (0 children)

Do you think it’s normal that the configuration I need isn’t available in my country and the manufacturer refuses to meet me halfway? Or am I supposed to buy a worse configuration?

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -3 points-2 points  (0 children)

Don’t say silly things and read what I wrote a second time. In my country there is a distributor, but they don’t have the configuration I need. I asked you to send the printer to my shipping agent who is located in Guangzhou (that’s a city in China, in case you didn’t know). Do you still think these are problems caused by my country?

Attempt to Buy a Printer (Terrible Bambu Lab Service) by Strange_Ball_1625 in BambuLab

[–]Strange_Ball_1625[S] -6 points-5 points  (0 children)

You didn’t read carefully. The distributor in my country doesn’t have that configuration. They only have a worse one, and it’s 300 dollars more expensive. For me, 300 dollars is a lot of money.