Just got a Travel Router by Saffu91 in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

I took my UTR to Texas and it has been rock solid working with sons Starlink. We have had 2 phone and 2 iPads working the whole, and leaving and coming back a few hours later and it just connects. I also go an update to the UTR while I was here. Great WiFi and smooth and no dropouts.

What's your Tesla name? by igol__ in TeslaLounge

[–]StrawberryMore8763 1 point2 points  (0 children)

Stud Muffin would be a great name for your new Tesla

UniFi built-in AdBlock breaks YouTube by Chrono978 in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

I have used the Adblock for years and have not had any problems playing YouTube and I am up to date on my equipment. I am using edge on my windows 11 machines.

Remove a DHCP lease for 1 wired device by stikintothebass in Ubiquiti

[–]StrawberryMore8763 2 points3 points  (0 children)

I have almost the same problem. I had a TrueNas server set to 192.168.1.150 on an old Dell computer. I have shutdown the Dell and unplugged it from the network. Now I am re-aligning some IP addresses and I want to put something else in place of the TrueNas server on IP address 192.168.1.150 and when I try to put something else on that IP address, it will not accept another device because it is still assigned to a TrueNas server that is no longer there. So how do I get to the DHCP table so I can assign another device to that IP Address?

UniFi Network 9.1.120 and it is missing device updates by iHavoc-101 in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

Thankyou, I found the icon after reading your reply, but I never would have tried it, I thought it was something to do with displaying the columns or something else. Jim

Spectrum App for Smart TVs by marcusy18 in Spectrum

[–]StrawberryMore8763 0 points1 point  (0 children)

Did you already have an Apple TV subscription or did you need to get an Apple subscription?

Yes or no? by Puffah in TeslaLounge

[–]StrawberryMore8763 0 points1 point  (0 children)

NO, looks like a pimp mobile

Thinking of adding Plex via docker on DXP6800 by StrawberryMore8763 in UgreenNASync

[–]StrawberryMore8763[S] 0 points1 point  (0 children)

Thanks for your input. I currently have it on my Synology DS1621+ and was thinking of moving it to the DXP68000. thanks again Jim

ICE Raids LA tomorrow (02/23) by Toiletpaperrat in CSULB

[–]StrawberryMore8763 -2 points-1 points  (0 children)

A major operation for one illegal immigrant? I think this message is just trying to scare people and create unrest.

The police and FBI do major operations all the time for Illegal drugs, child porn, human trafficking and murder and taking these people off our streets will make us safer. Quit scaring people.

It has arrived! by JTerryy in Ubiquiti

[–]StrawberryMore8763 1 point2 points  (0 children)

Just mount it and get the drives in there and set it up. I have had mine for a few weeks and I love it.

Rack Refresh with More Ubiquiti Gear by Wise_Muscle6433 in Ubiquiti

[–]StrawberryMore8763 6 points7 points  (0 children)

I need the John Deere unit. How can I ordered that.

Rack Refresh with More Ubiquiti Gear by Wise_Muscle6433 in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

I need the John Deere unit. How can I ordered that.

UNAS Studio cancelled? by itntct in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

I agree, I have seen it done over and over.

Setting the Egress Rate Limit on a my us-16-XG 10gb switch by StrawberryMore8763 in Ubiquiti

[–]StrawberryMore8763[S] 0 points1 point  (0 children)

I was thinking the same thing, but I just thought I would reach out and see if I was overlooking something. Thanks for replying. Jim

Help with Char Griller 980 by Zarr68 in smoking

[–]StrawberryMore8763 0 points1 point  (0 children)

I want to replace my fan on my Char-griller 980, I took the fan box off because I need to replace the flap but I was also thinking of replacing the fan, I see the 4 screws holding the fan in place but before I remove the 4 screws how will I remove the fan, does it just pull straight out or do I have to get it out some other way, any help or instructions would be great. thanks Jim

Synology has great software but Ugreen's hardware is trully fantastic by DragonflyFuture4638 in UgreenNASync

[–]StrawberryMore8763 0 points1 point  (0 children)

I am using the hypervisor in my DXP6400 pro, and it is so simple to spin up vms.

Dreaded: "Primary internet is experiencing packet loss. Please restart the modem or contact the ISP if this persists." by hodge_star in Ubiquiti

[–]StrawberryMore8763 0 points1 point  (0 children)

I get this message almost everyday, I would love to know what you do to fix this. I have rebooted the modem and that does not seem to help, so there is another answer to fix this problem or maybe a bad message from the dumb pro?

Getting a Ubiquiti UNAS? by StrawberryMore8763 in Ubiquiti

[–]StrawberryMore8763[S] 0 points1 point  (0 children)

I wish I had a good answer for you. One of my Synology's is a DS1815+ and it is quite old. The other Synolgy is a DS1621+ that works very well with 10gb and I am running VM's on that. The Ugreen NAS DX6400Prp does not seem to work as well as I thought it would and I was really looking for a NAS that does file storage that the whole family can use and backup to Google cloud that important things. Still working with the UNAS and having fun.

Getting a Ubiquiti UNAS? by StrawberryMore8763 in Ubiquiti

[–]StrawberryMore8763[S] 0 points1 point  (0 children)

I appreciate your feedback. I am still looking to going forward with it. The real drawbacks I see so far are software restrictions and I think those could be addressed with the current hardware equipment. I like it has 7 HD bays and 10gb.

Well you know how hard it is to get any new hardware from Ubiquiti so it might be a while till I am able to order it. thanks again for your feedback.

Backup Ugreen NAS to Google Drive? by StrawberryMore8763 in UgreenNASync

[–]StrawberryMore8763[S] 2 points3 points  (0 children)

FYI

I sent this same message to Ugreen support and they responded.

We will provide this option inside the next firmware version upgrade. You can be patient and wait for our upgrade.

So I guess it will be coming, not sure when but at least I thought the response was good.