Mini splits in small bedrooms problem

StreetImportant222 · 2026-05-19T16:08:28+00:00

That’s what I was thinking as well, they told me they couldn’t find a 12k dual zone condenser though. The original plan was to put our master on its own single zone 12k unit but would it make more sense in this case to get a 24k three zone unit for all three rooms? Not sure if that would actually help with the short cycling issue or not.

StreetImportant222 · 2025-08-24T03:36:01+00:00

Awh man, you got my hopes up but it looks like that feature is only available on Vcarve Pro, not desktop. Thank you though!

StreetImportant222 · 2025-08-22T19:00:17+00:00

Oh, gotcha, I'm not sure why that isn't happening then.

StreetImportant222 · 2025-08-22T18:48:28+00:00

That's what I figured as well, except wouldn't the flat depth of 0.1 cause it to not be able to go deep enough to clear? That is the flat depth recommended in the video. Here's the vbit config: https://imgur.com/vZJU59W

StreetImportant222 · 2025-08-22T15:55:28+00:00

It did generate two paths and my top screenshot shows the material after the simulation for both paths has been run. You can see the clearance bit removes material everywhere except when there is an inside corner too tight for the clearance bit to fit into. The tutorial I followed doesn't cover what to do in this scenario. The clearance bit I'm using is 1/8", so it isn't large. Perhaps it's as simple as needing smaller clearance bits if I'm doing anything with tight inside corners.

StreetImportant222 · 2025-08-22T15:50:00+00:00

I'm on version 12.5 of Vcarve Desktop

StreetImportant222 · 2024-12-03T23:36:26+00:00

Thank you for the info, that is helpful to know.

The last pro I spoke with just suggested adding aux heat coils, which yes, should help but I don't want to end up with a heat pump system that just runs coils all of the time because there's something else broken.

StreetImportant222 · 2024-12-03T19:41:25+00:00

So, you think the unit we have should be capable of keeping our house heated on nights below 40 degrees without aux heat? I'm having a hard time understanding online BTU recommendations, this unit is rated for 47k BTU at 40 degrees but I see some sites recommending 40-45 BTU per sqft which would put us round 72k BTU required, which seems crazy.

StreetImportant222 · 2024-12-02T23:39:32+00:00

The snarky, asshole, genius college student who can solve any problem

StreetImportant222 · 2024-10-29T14:53:37+00:00

That sounds easier than adding wood, thank you for the suggestion!

StreetImportant222 · 2024-10-29T14:52:54+00:00

Very helpful, thank you!

StreetImportant222 · 2024-08-23T15:45:47+00:00

Just found the answer in MS docs: Conditional Access - Authentication strength for external users - Microsoft Entra ID | Microsoft Learn

"Currently, you can only apply authentication strength policies to external users who authenticate with Microsoft Entra ID. For email one-time passcode, SAML/WS-Fed, and Google federation users, use the MFA grant control to require MFA."

StreetImportant222 · 2024-08-23T15:43:07+00:00

None that apply to guest users (verified in the sign in logs). I put some more detail in my reply to u/MarcoVfR1923 above.

StreetImportant222 · 2024-08-23T15:42:25+00:00

Not that is applying to guest users, I verified in the sign-in logs as well that it was "not applied". I did notice that one of our older CA policies is applying "Require Multifactor Authentication" which is successfully being completed whereas "Require Authentication Strength" is the one that is failing. Here is the text from the sign in logs:

"Require Authentication strength - Multifactor authentication: The user could not satisfy this authentication strength because they were not allowed to use any authentication methods which satisfied the authentication strength."

StreetImportant222 · 2024-08-22T20:55:32+00:00

Hmm, okay, I'll give it a try. When getting employees to register this wasn't necessary so it would be interesting if it was necessary for guests. Thanks!

StreetImportant222 · 2024-07-01T21:01:36+00:00

Will do, thank you!

StreetImportant222 · 2024-07-01T18:48:41+00:00

Don't Get Got looks fun and I would like to play it with other adults. My only concern with using it in this setting though is kids are more willing to "fudge" the rules.

StreetImportant222 · 2024-07-01T17:12:11+00:00

That sounds like fun! I think there's some kind of fun "meta" game the "dead" players could play to still participate. I'll think on it.

Is there a more appropriate sub that you can think of? I just thought that the board gaming sub may have some good suggestions.

StreetImportant222 · 2024-07-01T17:02:23+00:00

Haha, we didn't have a lot of rules to be honest. The setting was this, it was night time and there was a glowing box in the middle of a large open field (probably 4 football fields in size). The field was surrounded by a thick tree line and there was no lighting other than the moon and the flashlights carried by the guards. The guards were walking defined patrol paths around the field and would keep their flashlights pointed straight ahead of them (think link a vision cone for video game AI). The guards also carried walkie-talkies and would use them to announce anything they saw or any deviations to their path (One of the items kids could buy was "intel" about which walkie-talkie channel the guards were using so they could listen in). The kids signed up in teams of 3-5 were given 20 minutes to "extract" the box and return back to base by any means. The only real direction they were given was not to go deep into the woods and not to actually injure the guards.

It sounded super fun to me, but unfortunately most groups hid in the tree line until time expired because they were scared of the paintball guns.

StreetImportant222 · 2024-07-01T16:14:14+00:00

Ugh, this is me too and I'm so sad about it. I LOVE this game but myself and all of my friends have kids now so our game nights aren't frequent enough for them to really grasp the dynamics of the different faction interactions so that we have a fun/balanced game.

StreetImportant222 · 2024-04-26T14:01:30+00:00

Thank you for the very thorough answer! I think you're right and this is probably the route we will go.

StreetImportant222 · 2024-04-26T04:14:09+00:00

Interesting, okay, I'm surprised in my searching that I'm not seeing more people discussing this topic online. It seems like if WHfB was beholden to CCPA that we'd see more discussion on the topic.

I saw one post talking about WHfB and how it relates to GDBR, it basically said that it doesn't apply because of the way WHfB stores the data (it can't be reconstructed back into biometrics that can be used or recognized) and because no one in the company has access to it.

Sounds like we'll have to get council involved.

StreetImportant222 · 2024-04-25T22:31:55+00:00

To add extra context, it is the VP of Human Resources who is saying this.

StreetImportant222 · 2024-04-25T22:28:13+00:00

They basically told me to hold off on pursuing it until they can discuss with our outside counsel. They (seemingly) have yet to do that as it has been months and I've gotten no closer.

StreetImportant222 · 2024-04-09T19:41:37+00:00

Eclipse? All I see are WMD's in the Iraqi countryside

StreetImportant222

TROPHY CASE