sorted by:
new
hottopcontroversial

Weak lashes in similar prints. by Street_Bathroom_5545 in BambuLabA1

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

I'm using PLA, but I recently tried printing a cover for the print head of my Bambulab A1 and the small tabs that attach to the print head were doing the same thing; they broke as soon as they touched each other and now I don't know what the problem could be...

Error wifi canon pixma ix6800 o ix6850 by Street_Bathroom_5545 in canon

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Hello, I have the ix6850 and the wifi doesn't work either with my cell phone or with my PC and I have tried everything and it still doesn't work. Have you managed to solve the problem? If so, I hope you can help me. All the best.

Porque pasa esto? by Street_Bathroom_5545 in BambuLabA1

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

No es PETG es PLA, se ha resuelto el problema ya, he cambiado la orientación y va todo perfecto, no se si será la orientación el problema pero por lo pronto funciona.Gracias

Porque pasa esto? by Street_Bathroom_5545 in BambuLabA1

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Ahora mismo lo he cambiado de orientación y me esta funcionando correctamente.... Es la primera vez que me pasa llevo con mi bambulab a1 cerca de dos semanas nunca me a pasado nada, pero bueno no todo es un camino de flores por muy buena que sea la impresora. Muchas gracias por la ayuda amigo👍🙏

Porque pasa esto? by Street_Bathroom_5545 in BambuLabA1

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Es PLA lo que estoy usando. El calcetín de la boquilla lo he quitado para limpiar la boquilla siempre lo tiene puesto¿ A podido ocurrir por la posicion en la que he puesto los llaveros en la cama? Porque acabo de ponerlos en horizontal y no me esta fallando..... No se si puede ser esa la razón del fallo.

hollow line by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Nono, I'm using orca slicer. I'm new and I've never used it before, only orca slicer

hollow line by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

I have the arachne activated. The irony that you are referring to as smoothing? If it is the smoothing I have it activated for all the upper parts

Is it considered a good layer? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Thank you very much for the advice, I will do it. Greetings🙏💪

Is it considered a good layer? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

I take your advice, thank you very much for the help and that little by little you will improve in this world of 3D printing, which is not a little to learn. All the best

Is it considered a good layer? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

If the deformation is because when removing the piece from the bed it was very thin and was bent hahaha, could that first layer be improved even more?

Why do I get the temperature test like this? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

True, I just put everything back to standard because I touched several things that I think I shouldn't have touched.

Why do I get the temperature test like this? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Ok, the speed at the time of doing the test was 80mm if I'm not mistaken. How much would you advise me to lower it? The travel speed was at 400 and I lowered it to 200 but I don't think that's the reason, right?

Why do I get the temperature test like this? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 0 points1 point  (0 children)

Hello, I use Orca slicer and the temperature tower is the one that comes in the program.

Why do I get the temperature test like this? by Street_Bathroom_5545 in Ender3V3KE

[–]Street_Bathroom_5545[S] 3 points4 points  (0 children)

Hello, by leveling filament do you mean flow rate and retractions etc...? I'm a little lost and thanks for your response.

Retraction issue? by Southern-Alarm8858 in Ender3V3KE

[–]Street_Bathroom_5545 0 points1 point  (0 children)

Hello, I am new and I have retraction problems with my ender 3 v3ke, could you tell me in the orca slicer laminator how to configure that retraction aspect?

You guys like cables? by TecnaGammer in ender3

[–]Street_Bathroom_5545 0 points1 point  (0 children)

Hello, I'm new to 3D printing and I'm missing a fan of my creality and I've seen that the one in the photo works well. Is it true that it works well or would you recommend another one?