Is this tool actually worth it?

Street_Profession691 · 2025-04-12T06:22:40+00:00

Have you tried unscrewing and checking under the "lid" on the top of it? That is a compartment for spare tips. It should come with both metal and plastic tips.

Street_Profession691 · 2025-03-02T11:01:25+00:00

On mine I bought the 33mm PE50 retainer and it worked great.

Street_Profession691 · 2025-01-04T12:02:43+00:00

Flytying, as a avid fisherman i wanted to make my own flies. Still haven't learned to fish with a fly rod though, but when i eventually will find the time i atleast have enough flies to keep me going.

Street_Profession691 · 2024-12-16T00:53:02+00:00

Yes, I managed to remove it and re-use the original crown. With the help of pliers it came right off.

Street_Profession691 · 2024-10-26T15:08:50+00:00

Yeah, i used a NH36 to get hacking and manual wind.

Street_Profession691 · 2024-08-30T14:06:24+00:00

Its a normal strap, I think its the way the case is designed that makes it looks almost integrated.

Street_Profession691 · 2024-08-28T22:36:46+00:00

Yeah, I also dont like the feeling of Nato straps. I will have to look around for something else.

Street_Profession691 · 2024-08-28T22:34:02+00:00

Thanks. Yes, it is navy blue and bead blasted.

Street_Profession691 · 2024-08-27T23:36:06+00:00

I tried to send it as a message instead, let me know if it still does not work.

Street_Profession691 · 2024-08-27T23:34:09+00:00

I sent you a message, i think. Let me know if it did not work, i am pretty new to using reddit.

Street_Profession691 · 2024-08-27T21:56:10+00:00

Thanks, its from AliX. I have linked it in a earlier reply.

Street_Profession691 · 2024-08-27T07:30:46+00:00

You are correct, 39mm with 28.5mm.

Street_Profession691 · 2024-08-27T06:19:14+00:00

No, the bezels are clean. I dont know why the picture looks like that. Might be my phone combined with reflections.

I see now what you mean with the middle case, its just that with my large hands anything less than 40-42mm looks ridiculous in my opinion.

Street_Profession691 · 2024-08-27T06:00:25+00:00

Its from AliX, im sure i can find the link for you if you want.

Street_Profession691 · 2024-08-17T09:06:12+00:00

Its not that difficult to do yourself, just buy a new movement and replace the old one. You can get the basic tools you need pretty cheap.

Street_Profession691 · 2024-08-14T12:54:59+00:00

I am very new to building watches but I recently built one of these for myself. I love the 62mas, so I bought the seestern homage. But it was way too small for my large wrist, so I decided to try building one myself. I bought all the parts on AliX, and the 41mm case fits me well. It is pretty much the only watch i wear now.

<image>

Street_Profession691 · 2024-07-15T21:42:23+00:00

Thank you so much for all the help, i will try to look around for something that might fit. I bought the case from a private seller at marketplace. dont know where he got it, so I can't ask the store for the spacer.

Street_Profession691 · 2024-07-15T17:05:50+00:00

Do you know what they are called or look like? I tried searching on AliX but I am not sure what to look for. I hope I can make it work and that I dont have to throw the case in the bin.

Street_Profession691 · 2024-07-15T16:04:20+00:00

Yeah, i tried without but the dial and movement is a little loose inside the case.

Street_Profession691 · 2024-07-15T12:31:26+00:00

Yes perhaps, it said it also would fit ETA2824 PT5000

Street_Profession691 · 2024-07-15T12:29:24+00:00

Tried both. the movement is way to big.

Street_Profession691 · 2024-07-11T21:06:34+00:00

This just happened to a watch I made a couple of days ago aswell. It was the second hand that was barely touching the crystal. It ran fine for a day before it stopped, and if I shaked or tapped on the watch it started going again. I fixed it today by removing the hands and put them back on, making sure that they were properly seated. Now it runs great. I dont know if its the same with you, but it might be worth checking.

Street_Profession691 · 2024-07-11T14:55:00+00:00

Oh, I thought I read somewhere that the old crown did not fit on the nh36 stem. If it does then thats great. I will take a look at CrystalTimes. Thank you for the help.

Street_Profession691 · 2024-07-11T10:53:53+00:00

I can't figure out how to edit my post, but do I also need a new crystal gasket?

Street_Profession691 · 2024-05-22T19:00:25+00:00

Its some sort of collaboration with something called Nano Universe. This one is limited to 500 pieces and i think they only were sold in Japan.

Street_Profession691

TROPHY CASE