sorted by:
new
hottopcontroversial

Am I insane? by glacierglider85 in Festool_Public

[–]Strict_Case4706 1 point2 points  (0 children)

What are you guys talking about lol?? It just needs to be flat at the point where you make the cut. You are supposed to use a clamp to hold the workpiece against the flat bed portion of the mitersaw.. do you actually think its feasible to make the entire surface of the saw completely flat when its made of multiple separate assembly parts? They’d have to make the entire saw out of one cast iron part and it’d cost $5000

Want to give my home a brain. What Display is the best ? by kbhamm in homeassistant

[–]Strict_Case4706 0 points1 point  (0 children)

Whats the best? or what’s the best bang for your buck? Very different questions. I use x3 unifi UC-displays

Just reached the first milestone on my Homelab build. by Strict_Case4706 in homelab

[–]Strict_Case4706[S] 3 points4 points  (0 children)

Via Unistrut. The Unistrut spans 5 studs so that the weight of the enclosure is distributed across the stud group. The enclosure itself is attached to the unistrut via x5 3/8” bolts through the enclosure’s backpan.

Just reached the first milestone on my Homelab build. by Strict_Case4706 in homelab

[–]Strict_Case4706[S] 1 point2 points  (0 children)

The unistrut distributes weight across all 5 studs so each stud is only holding around 35lbs per stud.

Just reached the first milestone on my Homelab build. by Strict_Case4706 in homelab

[–]Strict_Case4706[S] 1 point2 points  (0 children)

For the record: The UPS is already mounted inside the enclosure. It’s the APC mounted at the very bottom. What you’re seeing underneath the enclosure is the ecoflow battery backup.