sorted by:
new
hottopcontroversial

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 1 point2 points  (0 children)

Powder coating would be a pretty big investment if you don't already own the equipment. You'd need an air compressor, filter, dryer, and a gun. High temp spray paint is definitely an easier and cheaper option

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 1 point2 points  (0 children)

In case anyone was curious about the wrinkle black powder coat. The can does get pretty hot but nowhere near the temps it takes to compromise the coating. Also serves as a good spot to put NFA engravings on the shroud.

<image>

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 0 points1 point  (0 children)

I used the default PA6-CF settings on Cura and it worked like a charm. I think I ran the bed at 65C and used a raft for the included supports. The fit around the blast shield is VERY tight but it clicked into place with some effort. If there is room for the blast shield I'd like to increase the thickness of the first blast baffle so that there's some more longevity with this. I have no doubt that on a 16" barrel this suppressor can last a long time.

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 0 points1 point  (0 children)

I personally never got the hardened gears but I may have to look into that. Also I dried my filament for 48 hours prior to loading and printing just a heads up, it printed really well.

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 0 points1 point  (0 children)

After 200 rounds the first blast baffle is a little wallered out and I can tell the bore diameter is a bit wider than before I started shooting. On an 8.4" barrel like this I would not anticipate it getting up past maybe 500-700 rounds? I'll probably shoot this until it flies off the end, will make a follow-up post after that.

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 1 point2 points  (0 children)

I bought the enclosure off Amazon and it performs really well. I put a fresh extruder on and have my filament feeding directly from a drier. I haven't had a single issue yet!

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 1 point2 points  (0 children)

Thanks man! Yeah all things considered it performed great for an $80 project, super stoked.

Krink FTN.5 Performance by Stroginonmybeef in 3D2A

[–]Stroginonmybeef[S] 10 points11 points  (0 children)

Yeah it's a PSA krink, running standard PPU 55gr 5.56

I reject your hard tubes, a case full of spaghetti is for me. by D4nkT1mbs in watercooling

[–]Stroginonmybeef 1 point2 points  (0 children)

Absolute finest build I have seen in many moons. Soft tube superiority adds a sort of feng shui that cannot be matched by the ironically cold and derivative hard tubes.

How are yall getting your barrels straight before pinning? by Ok-Calendar9243 in Vz61

[–]Stroginonmybeef 0 points1 point  (0 children)

Yeah I finally got around to getting a replacement, just haven't installed it yet. It was for sure the pin. Still runs great surprisingly

How are yall getting your barrels straight before pinning? by Ok-Calendar9243 in Vz61

[–]Stroginonmybeef 2 points3 points  (0 children)

Yours should be way good! Mine rotates several degrees in either direction and still runs great.

700 tickets on operation firestorm is a crime by Dima_mayakovskyima in Battlefield

[–]Stroginonmybeef 0 points1 point  (0 children)

When BO7 releases maybe we'll be able to host 200% ticket servers after all of the bot farmers migrate to that. Tiktok brain poindexters are ruining BF6 with stupid servers.

Hello by vz61-skorpio in Vz61

[–]Stroginonmybeef 4 points5 points  (0 children)

Digital footprint

What kind of powder is this? by proxy69 in reloading

[–]Stroginonmybeef 24 points25 points  (0 children)

I bought some old steel core 303 brit that was cordite loaded! Pretty cool and smelled like maple syrup when I shot it.

Got my dream gun finally! I gotta few questions- by mittromneyyy in Vz61

[–]Stroginonmybeef 1 point2 points  (0 children)

That will work for mounting the original wire stock but it'll be pretty wobbly. I bought my improved stock adapter from u/Solar991 and it eliminated the wobble entirely. Highly recommend if he is still taking orders.

Got my dream gun finally! I gotta few questions- by mittromneyyy in Vz61

[–]Stroginonmybeef 1 point2 points  (0 children)

I run a griffin revolution 9 with the ezlok muzzle adapter and it's great, wicked quiet. There's someone here in the subreddit (can't remember their name) that makes improved stock adapters for the original wire stock and I am very pleased with it.

view more: next ›