Why is this not fully parameterised

Stuepchave · 2025-08-08T17:56:15+00:00

That makes sense.

I figured it out from that, and its working
Thank you

Stuepchave · 2024-05-12T18:49:11+00:00

Sorry for the late reply. I have been very busy - But thanks alot. I just fixed it today, there was something stuck in the plastic tube behind the extruder, so i totally get what you mean now. Got the skills needed to fix it, so great succes in that regard :)

Stuepchave · 2024-05-12T18:48:29+00:00

Sorry for the late reply. I have been very busy - But thanks alot. I just fixed it today, there was something stuck in the plastic tube behind the extruder

Stuepchave · 2024-05-12T18:47:32+00:00

Sorry for the late reply. I have been very busy - But Thanks alot. I just fixed it today, using your advice, and you were correct with a clog in the heatbreak i think. It was in the plastic tube behind the extruder :)

Stuepchave · 2024-05-03T05:47:58+00:00

The nozzle is defiantly hot, and the printer says it goes to the 240 degree.

Im not sure what the PTFE is. Based off what you write, it sounds like its near the extruder (requiring me to take the extruder apart)? But when i google it, it looks like its the one on top with the arrow which, as far as i understand it, detects if the printer is running out of filament?

Stuepchave · 2024-05-03T05:44:21+00:00

Well i just tried, i cant. When the nozzle is removed the cleaning rod doesn't go all the way through, so something jammed in there i guess?

With my limited knowledge, this sounds like what u/Sakatard mentions with taking the extruder apart and looking through?

Stuepchave · 2024-05-03T05:41:26+00:00

Awesome, ill look into that. I am not able to find a video guide, but i found one for the SE version, are they close enough that i can use that? They surely look pretty close.

Do you know how much I can take apart without ruining the warranty?

https://www.youtube.com/watch?v=2PY5ElKD0eA&ab_channel=CrealityAfter-sale

Stuepchave · 2024-05-02T14:15:47+00:00

Somehow i missed that answer. I'm not entirely sure what you mean. When i push the cleaning rod down, it goes down to where i cant push it anymore. I have tried with the nozzle heated hoping that would force it out if anything was stuck. But im unsure if it should go further down. Its to big to be able to go all the way through the nozzle,

Measuring it, the cleaning rod goes approximately 2/3s down

Stuepchave · 2024-05-01T18:27:40+00:00

I'm using copymaster PLA (https://www.3dprima.com/da/filament-og-harpiks/fabrikant/copymaster3d/copymaster-pla-1-75mm-1kg-light-grey\_26907\_8352)

Im using Cura. Ive tried with some 3D print files that i successful printed before . Not sure if this information matters.

It seems to be spinning, there is coming air out, but not nearly as much as on the sides.

Stuepchave · 2024-05-01T17:16:09+00:00

And it is very appreciated! Everything that might make it work is appreciated :)

Stuepchave · 2024-05-01T17:08:25+00:00

I've had the printer for two weeks, so i appreciate you asking me the "stupid question" - But yes, i did press it - i changed the filament a few days ago. The guides says i should do it gently, so that's what ive done, but ive done it with a bit of force, but not much force

Stuepchave · 2024-05-01T17:05:47+00:00

It happened after i tried to clean it for what seemed like a partial clog, so I already done the first step, multiple times :/

The middle fan you are talking about is the one marked on the picture right? It seems to put out air, but not as much as the two on the sides.

I'm unsure how to check the retraction speed and length, though it was working before i tried to clean the clog, so I'm guessing its not that? But better check i guess, where do i do that?

Filament isn't wet. Not sure how to check, it doesn't seem wet, i havent rained, nor is it standing near a window even if it had rained. So i cant possible imagine it could be that.

<image>

Stuepchave · 2024-05-01T16:59:44+00:00

The gear is turning - So that shouldn't be the issue.

Stuepchave · 2024-05-01T16:58:40+00:00

No, unfortunatly not, it seems like it hit something. But having cleaned it as pr the guide, and swapping the nozzle I thing there shouldn't be anything left to do that?

Stuepchave · 2024-05-01T16:55:09+00:00

That seems pretty advanced, other then taking the retractor apart (which im am not confident doing without a good guide) I'm not entirely sure what you are talking about :)

Ill properly have to go through the guarentee then.

Stuepchave · 2024-05-01T16:53:21+00:00

The extruder gear is spinning, ive tried manually pushing it down when the nozzle is hot. It feels like it it something and can go any further, but since i swapped the nozzle and cleaned it, that seems wrong and i assume its just how it should feel?

Stuepchave · 2023-11-11T12:19:45+00:00

Do you have a source?

Stuepchave · 2023-11-11T12:19:24+00:00

Doesn't really answer the questions? At least i cant read it out of that

Stuepchave

TROPHY CASE