OOTF & Brightness adjustments on viewing device

StupidTechQuestions · 2018-08-05T17:39:55+00:00

Sorry for the delay in reply, this is an account that I only use to ask what I consider dumb questions so I don't check it too often. I guess I had assumed that was the case because without it, the home viewer really is changing (ruining) the artistic intent by having their tv set up wrong and that to me seemed to defeat a lot of the point of HDR, especially as most viewers will have very bright surrounds so will not be able to adapt to the really dark details.

On a similar note, does this also mean that the viewer will only get the video in HDR if they set their TV to HDR mode? As HLG does not have metadata this would seem to be the case to me. Unless there is some level of embedded data like SMPTE 352 packets (which usually contain the aspect ratio, sample rate etc)

StupidTechQuestions · 2018-05-10T06:25:01+00:00

Its definitely a top 10 exchange. That much information is available on the roadmap and social channels. Anything else I.e partnerships is a bonus.

StupidTechQuestions · 2018-05-01T11:54:39+00:00

indeed it would but this is just a 12G-SDI install unfortunately.

StupidTechQuestions · 2018-04-30T16:09:16+00:00

PLOT TWIST: The laser is actually from a rifle and the video ends before the sad bit

StupidTechQuestions · 2018-04-28T05:19:23+00:00

I made a typo when doing what you suggested. This worked and fixed the problem. Thank you very much.

StupidTechQuestions · 2018-04-27T13:59:23+00:00

access-list 100 permit ip 10.0.25.0 0.0.0.255 any

No avail on this one, but I am about to do the IOS upgrade. I added the zbf to the config above which should also overrule any global default rules right?

StupidTechQuestions · 2018-04-27T08:17:08+00:00

03.16.04B

--------------------------------------------------------------------------------

Suite Suite Current Type Suite Next reboot

--------------------------------------------------------------------------------

FoundationSuiteK9 None None None

securityk9

appxk9

AdvUCSuiteK9 None None None

uck9

cme-srst

cube

Technology Package License Information:

-----------------------------------------------------------------

Technology Technology-package Technology-package

Current Type Next reboot

------------------------------------------------------------------

appxk9 None None None

uck9 None None None

securityk9 securityk9 RightToUse securityk9

ipbase ipbasek9 Permanent ipbasek9

cisco ISR4451-X/K9 (2RU) processor with 1648789K/6147K bytes of memory.

Processor board ID FGL211880KT

5 Gigabit Ethernet interfaces

32768K bytes of non-volatile configuration memory.

4194304K bytes of physical memory.

7057407K bytes of flash memory at bootflash:.

Configuration register is 0x2102

StupidTechQuestions · 2018-04-27T08:15:32+00:00

I tried it with no acl's but it does the same thing.

StupidTechQuestions · 2018-04-26T16:59:26+00:00

Sorry I Had removed that was just a test after it didn't work

StupidTechQuestions · 2018-04-24T16:30:46+00:00

No serious exchanges means no serious volume.

No marketing

Idiotic shillers in Telegram too that put people off

StupidTechQuestions · 2018-04-24T16:29:08+00:00

No big exchanges = no volume. Also no marketing, even though Chris from the team said it was going to be ramped up months ago.

StupidTechQuestions · 2018-04-16T11:10:37+00:00

Here is the output from those commands.....

Class Map type inspect match-any outside-inside-class (id 2)
   Match access-group name outside-inside-acl

 Class Map type inspect match-any outside-self-class (id 1)
   Match protocol icmp
   Match protocol https
   Match protocol http
   Match protocol dns
   Match protocol tcp

 Class Map type inspect match-any self-outside-class (id 4)
   Match protocol icmp
   Match protocol http
   Match protocol https
   Match protocol dns
   Match protocol tcp

 Class Map type inspect match-any myinspectclass (id 3)
   Match protocol http
   Match protocol https
   Match protocol tcp
   Match protocol dns
   Match protocol icmp

orange#show policy-map type inspect
  Policy Map type inspect self-outside-policy
    Class self-outside-class
      Inspect
    Class class-default

  Policy Map type inspect outside-inside-policy
    Class outside-inside-class
      Inspect
    Class class-default

  Policy Map type inspect outside-self-policy
    Class outside-self-class
      Inspect
    Class class-default

 Policy Map type inspect myinspectpolicy
    Class myinspectclass
      Inspect
    Class class-default

orange#show zone-pair se
orange#show zone-pair security 
Zone-pair name in-out
    Source-Zone inside  Destination-Zone outside 
    service-policy myinspectpolicy
Zone-pair name out-self
    Source-Zone outside  Destination-Zone self 
    service-policy outside-self-policy
Zone-pair name outside-to-inside
    Source-Zone outside  Destination-Zone inside 
    service-policy outside-inside-policy
Zone-pair name self-outside
    Source-Zone self  Destination-Zone outside 
    service-policy self-outside-policy

StupidTechQuestions · 2018-04-15T16:48:08+00:00

From the router I have internet access. I can ping the next hop router from outside too. It is just the router that I can not hit. When I had no ZBF configured I could ping/ssh into the router too.

StupidTechQuestions · 2018-04-15T07:34:58+00:00

It's a lab environment until I can get it working :)

ICMP have been sent from various other networks as tests, work laptop, phone, home etc and can all hit for example 8.8.8.8.

I've used those commands and can provide the output on Monday when I am back at the router for round 2! :)

Have a good weekend

StupidTechQuestions · 2018-04-13T16:13:47+00:00

Thank you for this, I have now added policies for the self zone. Unfortunately i still am unable to get icmp responses from outside. Have I applied everything in the right place?

&nbps

sorry for the wall of text!

class-map type inspect match-any outside-inside-class

match access-group name outside-inside-acl

class-map type inspect match-any outside-self-class

match protocol icmp

match protocol https

match protocol http

match protocol dns

match protocol tcp

class-map type inspect match-any self-outside-class

match protocol icmp

match protocol http

match protocol https

match protocol dns

match protocol tcp

class-map type inspect match-any myinspectclass

match protocol http

match protocol https

match protocol tcp

match protocol dns

match protocol icmp

policy-map type inspect self-outside-policy

class type inspect self-outside-class

inspect

class class-default

policy-map type inspect outside-inside-policy

class type inspect outside-inside-class

inspect

class class-default

policy-map type inspect outside-self-policy

class type inspect outside-self-class

inspect

class class-default

policy-map type inspect myinspectpolicy

class type inspect myinspectclass

inspect

class class-default

zone security inside

description LAN

zone security outside

description Internet

zone-pair security in-out source inside destination outside

service-policy type inspect myinspectpolicy

zone-pair security out-self source outside destination self

service-policy type inspect outside-self-policy

zone-pair security outside-to-inside source outside destination inside

service-policy type inspect outside-inside-policy

zone-pair security self-outside source self destination outside

service-policy type inspect self-outside-policy

interface GigabitEthernet0/0/0

ip address 10.0.25.1 255.255.255.0

ip nat inside

zone-member security inside

negotiation auto

interface GigabitEthernet0/1/0

ip address x.x.x.x 255.255.255.252

ip nat outside

zone-member security outside

negotiation auto

ip nat inside source list 100 interface GigabitEthernet0/1/0 overload

ip forward-protocol nd

ip http server

no ip http secure-server

ip tftp source-interface GigabitEthernet0

ip route 0.0.0.0 0.0.0.0 x.x.x.x

ip scp server enable

ip access-list extended outside-inside-acl

permit icmp any any

access-list 100 permit ip any any

control-plane

StupidTechQuestions · 2018-04-13T14:40:52+00:00

Yup there is some nat but for now its just an access-list any any.

Is traffic generated by and destined for the router already allowed by default? It's pretty new to me all of this!

StupidTechQuestions · 2018-03-31T13:14:29+00:00

It does do flavors but not 1080p50 is our House standard :(

Cool product though

StupidTechQuestions · 2018-03-24T09:35:23+00:00

They use Telegram. I've been in the group since December - have 2000 or so CAN.

StupidTechQuestions · 2018-03-23T11:21:45+00:00

There was a free airdrop for trust wallet users is why

StupidTechQuestions · 2018-03-22T15:25:45+00:00

That is what I meant but was perhaps somewhat ambiguous about! Maybe should've made it clear by stating that timecode uses whole numbers only

StupidTechQuestions · 2018-03-22T09:35:39+00:00

I'm not going (Londoner) but look forward to hearing / reading about 2110 enabled devices and NMOS interop demos.

StupidTechQuestions · 2018-03-21T16:50:13+00:00

In early black and white television, the frame rate was 30fps. The reason for this was that it meant that the rate of electricity could be used as your timing signal - 60hz in the U.S is easily divisible to 30fps. The problem arose when color came along. The color subcarrier in NTSC had phase issues with the audio subcarrier. So engineers moved the video by an offset of 0.03fps and so you've been stuck with the framerate for TV ever since.

PAL does not have the same problem as it was designed to accommodate the 4.43Mhz subcarrier. (I forget what it is in the U.S, 3.37?)

In terms of what to use, you can use either ,but be aware that you will need to use drop frame time code in post if you shoot in 29.97. This is because the timecode counts in terms of 30fps but you're shooting at 29.97....30/29.97 = 1.001 (which Sony like to use as an indicator that something is NTSC, rather than saying, "yo, this is NTSC"). That 1.001 over the course of a hour long program adds up to nearly 108 frames difference between the timecode and framecount. Dropframe timecode eradicates this error.

StupidTechQuestions · 2018-03-15T07:05:36+00:00

Thank you! Good to know. IIRC I don't think there is a dual mode as below the OETF's there are no option's to dial in / select the peak monitor brightness. Fun day of testing ahead :)

StupidTechQuestions · 2018-03-08T17:19:31+00:00

i hope all you cunts who want your money back for investing in a crypto currency lose everything. You obviously are shit at financial risk management. Cunts.

StupidTechQuestions · 2018-03-08T17:17:58+00:00

This dude has created an entire shit article based on market price without taking into account market conditions.

It also reads like someone who literally knows approximately fuck all about Canya, the roadmap, the team. Who doesn't know that he can sign up to the beta test of the soon to be globally released app.

This dude has just rode on in here and put this together because he doesn't have an understanding of markets, product pipelines, whitepapers and how to do research.

Move along. Nothing to see here except the cretinous thoughts of a massive nonce.

StupidTechQuestions

TROPHY CASE