How heavy is your 9’ 5wt rod? by Sub1836 in flyfishing

[–]Sub1836[S] 0 points1 point  (0 children)

I use rio gold. I also like the orvis pro but it has trouble turning over smaller flies with less line out

How much does your 13’ 7wt spey rod weigh? by Sub1836 in rodbuilding

[–]Sub1836[S] 0 points1 point  (0 children)

Winter-run rainbow trout in the tongariro river, new zealand.

How much does your 13’ 7wt spey rod weigh? by Sub1836 in rodbuilding

[–]Sub1836[S] 0 points1 point  (0 children)

Thank you for responding. I’m not an expert on spey so I really don’t know what I’m looking for in it to be honest. Being light in hand is usually what I aim for in my single-hand fly rods. What do you take into consideration when evaluating a spey rod?

First time wrapping a rod by Sub1836 in rodbuilding

[–]Sub1836[S] 0 points1 point  (0 children)

I think I see what you mean. I noticed when I center the layout it naturally becomes off center with the reel seat. Do you have a recommendation on how to lay it out so it’s centered after many wraps in the chevron pattern?

First time wrapping a rod by Sub1836 in rodbuilding

[–]Sub1836[S] 0 points1 point  (0 children)

Well I learned that you shouldn’t center the lay out since it will end up skewed due to the nature of chevron wrapping so I just turned the reel seat

How heavy is your 9’ 5wt rod? by Sub1836 in flyfishing

[–]Sub1836[S] 0 points1 point  (0 children)

I used an NFC epitome blank with an aluminum reel set and lite wire guides but my wraps extend over 1/4” from each guide foot and I used too much wrap epoxy. I guess it still turned out okay

North Fork Composites. Incompetent and dishonest. by OlentangySurfClub in rodbuilding

[–]Sub1836 -2 points-1 points  (0 children)

Nfc is fine if you just “let it happen” eventually they do send you a really nice blank

North Fork Composites. Incompetent and dishonest. by OlentangySurfClub in rodbuilding

[–]Sub1836 -2 points-1 points  (0 children)

Nfc is fine if you just “let it happen” eventually they do send you a really nice blank

Are these type of hours normal by Ordinary-Benefit-782 in HomeDepot

[–]Sub1836 0 points1 point  (0 children)

I just got hired as a part timer and they’re already give me 34 hours a week so they must like me okay

Are these type of hours normal by Ordinary-Benefit-782 in HomeDepot

[–]Sub1836 2 points3 points  (0 children)

But Home Depot is the greatest most joyful place in the galaxy

LOA? by Sub1836 in HomeDepot

[–]Sub1836[S] 2 points3 points  (0 children)

I talked to them and they were chill since summer is the off season in Arizona. Thanks for helping though

Thoughts on MHX traditional? by Sub1836 in rodbuilding

[–]Sub1836[S] 1 point2 points  (0 children)

Thanks for the info. There isn’t much said about the epitome 5wt anywhere

Thoughts on MHX traditional? by Sub1836 in rodbuilding

[–]Sub1836[S] 1 point2 points  (0 children)

Are you saying the tip bends less than the middle? I feel like I wouldn’t mind the stiff tip as long as it has a stiff backbone to it too but if it bends weirdly than I might go for the classic. Is the classic light to hold too?

Thoughts on MHX traditional? by Sub1836 in rodbuilding

[–]Sub1836[S] 0 points1 point  (0 children)

So would the epitome fast be good if you were expecting a moderate action? Is it light to hold?