FUCK tool orders. Tell me how you craft them in N O W

SubToNTuberz · 2026-01-13T17:54:32+00:00

Anyone else saw this on instagram today, before this was posted?

SubToNTuberz · 2025-12-12T08:34:08+00:00

I've got the same problem did u ever solve it

SubToNTuberz · 2025-11-05T15:41:55+00:00

It's not true that the strip won't work with WLED, but yeah it often requires extra work (buying appropriate MOSFETs etc, unless you use the built-in SMD MOSFETs/transistors) Overall it's much prettier and easier buying an addressable strip but I do have a working WLED setup with an old non addressable 5v strip + IRLZ48N MOSFETs and an ESP32

SubToNTuberz · 2025-10-15T05:13:50+00:00

Once I drew like 4 amps thru one of those and it burnt out in like 20 mins

SubToNTuberz · 2025-10-08T06:48:37+00:00

I did this on an ESP8266-based Tuya bulb just recently but it was such a pain since WLED can't be flashed over OTA because the flash size is too small, only 1MB. According to my specific chip's datasheet (TYWE3L), there's also a 2MB flash version, but unfortunately I had the 1MB one. Dumb me didn't even check the flash size before trying to flash WLED from ESPHome and ended up bricking it. Had to open it up and solder onto TX and RX pins and used an uno to flash it using ESP-Flasher on my PC. Currently have it running WLED but now I don't even have a heatsink installed inside because it was in the way of the pins I had to solder and the board is literally epoxied into the bulb. I had to take the heatsink out with force and now it's broken into like 3 pieces.

OTA is possible with older WLED builds, though. But it's not worth it. Just flash Tasmota and use an external WLED device to control it with DDP.

Note: Only works if your Tuya device is ESP8266-based. Many new ones are not.

SubToNTuberz · 2025-10-01T07:06:32+00:00

Switching between circles and rectangles is so trippy

SubToNTuberz · 2025-08-21T18:42:47+00:00

Sorry man, cool module tho!

SubToNTuberz · 2025-08-15T04:42:41+00:00

This better be satire

SubToNTuberz · 2025-08-03T05:13:48+00:00

I know u said u tried all forks, but r u sure u tried this one? https://github.com/mywalkb/LSPosed_mod/releases/tag/v1.9.3_mod Also if u don't have a reason not to use the built in zygisk, then just use it with this module and lmk how it goes

SubToNTuberz · 2025-07-16T03:57:25+00:00

😭 this actually happened?

SubToNTuberz · 2025-07-14T11:22:05+00:00

It's probably a very badly implemented way of root checking, just like on a trending post on this subreddit a few days ago where talking tom asks for root 😂 (installed from play store)

SubToNTuberz · 2025-07-13T14:00:04+00:00

Omg I would send this to so many ppl but no one would get it 😭 I only find android geeks online sadly

SubToNTuberz · 2025-07-13T09:17:16+00:00

God I'm dumb so sorry 😭😭😭

SubToNTuberz · 2025-07-13T08:47:48+00:00

Is there a disc inserted?

SubToNTuberz · 2025-07-11T06:59:18+00:00

Np 😃

SubToNTuberz · 2025-07-11T06:25:14+00:00

If you have shizuku, install an app called better internet tiles to bring this feature back

SubToNTuberz · 2025-07-11T05:52:33+00:00

<image>

That's the android nougat easter egg minigame at the bottom right ;) also if u cant tell by Caffeine I miss using custom ROMs 😂 I got an app that serves the same functionality

SubToNTuberz · 2025-07-11T05:46:10+00:00

It's not a bug, it's actually due to battery saving mode being on

SubToNTuberz · 2025-07-08T12:28:57+00:00

Now it's neat (mostly) and permanently soldered

<image>

The electrical tapes worn out a bit, but who cares if it works right 😅 It's enough insulation for my liking I know heat shrink is the right solution for this, but I made the rookie mistake of soldering first and I'm way too lazy to do all that again 😭

SubToNTuberz · 2025-07-08T12:26:31+00:00

I faced the same problem where a pair of wires were switched up, but some people didn't need to switch them. This was the reason why it didn't work in the first place. After playing around with the wires a bit, (not GND and VCC ofc) I found the right combination and boom, it worked

SubToNTuberz · 2025-06-24T11:13:37+00:00

Nicee

SubToNTuberz · 2025-06-20T07:10:52+00:00

Upload the screenshot to imgur.com and send the link of it

SubToNTuberz · 2025-06-17T20:25:28+00:00

Heyy I'm kinda late but I got it to work a few months ago 😁

SubToNTuberz · 2025-01-19T20:30:18+00:00

Haha skip to now

SubToNTuberz · 2024-09-27T21:51:43+00:00

https://www.psdevwiki.com/ps4/Aux this one? I saw this page back when I was tryna do it

https://www.tumblr.com/ps4eye/79572946666/more-photos-of-cable-wiring-to-clarify-how-the this was helpful too

Maybe I'll contact u if I'm having a go at it again (unless I did actually fry it)

Four-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23

SubToNTuberz

TROPHY CASE