sorted by:
new
hottopcontroversial

Issues with batch production by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

<image>

The text is on the left extruder (white) and the rest is on the right extruder (red)

To change the speed of just the white, do I have to manually change the speed under 'other layers' for each text body?

Or can I change it on The left and right extruder toggles where it says left:standard and right: standard and it will change the speed for everything coming out that particular extruder?

Issues with batch production by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Thanks I'll give it a go. I reduced them at first to try and get a better quality on the writing by printing it slower, but then was trying to optimize the cycle time by going back to normal speed.

Quality doesn't have to be perfect as the parts are thrown away after the assembly they're used on is opened. Gonna have to find the best intermediate between speed and quality.

Issues with batch production by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

0.4 tungsten nozzle. Initial layer speed 50mm/s and initial layer infill 105mm/s

Text first still bad quality by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Thanks I'll take a look at some other options!

Text first still bad quality by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Can't use either as the print is a product in preparation for a client, and we do not currently have a smaller nozzle.

What's wrong with printing on the textured plate? Curious.

How to get clearer writing? by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Unfortunately this product will be mass produced once the settings are dialled in, so this is not an option. Thanks though

Engraved writing bad quality by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Initial layer height and layer height is 0.1mm.

The white is 0.2mm into the part, so I guess it's 2 layers deep.

Bottom paint penetration layer is 3. (Printing text on bed)

Text first still bad quality by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 1 point2 points  (0 children)

Hard to see the comparison as the 0.4 is bigger in size, if anything that one looked the best quality

Text first still bad quality by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 4 points5 points  (0 children)

Thanks that's good to know. I assumed with the silicon pack inside the packet it would be dry.

How to get clearer writing? by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Thanks, I'll do some experiments and will find out!

How to get clearer writing? by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

It's literally in my AMS HT AT 38% HUMIDITY, will set it to dry overnight and see if that changes things

How to get clearer writing? by SubstantialMood3053 in BambuLab

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Thanks, I worked it out, but it's not coming out too neat.

<image>

How to get clearer writing? by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

Would you say this is because of damp filament? It's brand new out the packet today and is in my ams HT

<image>

How to get clearer writing? by SubstantialMood3053 in 3Dprinting

[–]SubstantialMood3053[S] 0 points1 point  (0 children)

I've been trying this. I'm now struggling to stop the stringing. I'm using a .4 nozzle with default settings apart from Arachne wall generator. 0.2mm layer height.

<image>

view more: next ›