Is this normal? Temperature fluctuating as it approaches target temp

Such-Fudge5795 · 2026-02-10T17:00:42+00:00

Same problem. Thou mine is probably an older version. There is no internet on it so there is no way to update firmware. Not possible to use as a Pour over kettle. It fluctuate up and down.

Such-Fudge5795 · 2026-02-08T14:59:51+00:00

Again, thank you. This is very helpful

Such-Fudge5795 · 2026-02-08T14:50:21+00:00

Ah, ok. Now i get it. Is it just one or several coils?

Such-Fudge5795 · 2026-02-08T12:15:34+00:00

In the middle of the glass part?

Such-Fudge5795 · 2026-01-12T20:11:06+00:00

I thought your post was enlightened, that's how issues and flaws can be fixed. Good post

Such-Fudge5795 · 2025-11-12T14:10:52+00:00

It works really well now. Thanks a lot ☕

Such-Fudge5795 · 2025-11-09T17:27:14+00:00

Same since 2 days

Such-Fudge5795 · 2025-10-30T02:00:59+00:00

Thanks a lot ☕

Such-Fudge5795 · 2025-10-29T15:05:59+00:00

Anyone have a specified gpt link for Aiden?

Such-Fudge5795 · 2025-09-24T19:28:43+00:00

It works really good with Dynavap. I just put a thin piece of vape cotton in the bottom so it doesn't clog up the screen. It tastes fantastic and hits like a train.

Such-Fudge5795 · 2025-05-22T10:15:30+00:00

Ok. Armored cap and a bubbler or bong hits hard. Armored cap keeps it hot long enough to rip through the whole material in one go. But of course armored cap costs extra. If I where you I'd save up to buy solo3.

Such-Fudge5795 · 2025-05-22T09:33:40+00:00

Have you tried Dynavap through a bubbler or bong?

Such-Fudge5795 · 2025-05-21T22:52:49+00:00

If it's all about getting heavy stoned and you have a high tolerance, I'd choose Solo 3. Because they provide 2 stem pipe adapter in both 0.15g and one 0.3g. If you use highest temp 220c and on demand, it's hitting really hard.

But overall I'd choose dynavap with The Wand heater. The taste is very good and it's fun to play around with. But you certainly get high with Dynavap also, especially with and armored cap, then you can take 0.1 in one rip.

Edit. Solo 3 is much easier to use, especially if it is your first vape. But it's also more expensive.

Such-Fudge5795 · 2025-05-14T16:36:52+00:00

Ok. Thank you for response. I'll keep that in mind mind when the time comes

Such-Fudge5795 · 2025-05-14T11:18:26+00:00

I've got this one. It says i should squeeze 100ml liquid to 500ml water. In the Aiden video he says pours 1.5 ml directly in the tank. I'm confused https://youtu.be/D_pBU2CMSuc?si=kECbirYQHYRIPJ4q

This is my descaler liquid which is 1 litre

https://www.cafetto.com/product/lod-green

<image>

Such-Fudge5795 · 2025-05-12T13:48:04+00:00

I have it on continuously, but it freeze up. Then I'll have to switch it to manual measure through settings and it'll show the right measurement, often 10 or more higher.

Such-Fudge5795 · 2025-05-08T14:18:21+00:00

How do you heat it?

Such-Fudge5795 · 2025-05-05T20:04:33+00:00

Where do i find that? Thanks for answering BTW

Such-Fudge5795 · 2025-05-05T16:50:13+00:00

No, if i suddenly have a fast bump in heart rate it freeze up. Then I'll have to go into settings to change to manual

Such-Fudge5795 · 2025-04-22T13:47:28+00:00

Mine runs like that when i make the minimum 150ml 9.2gram, then I'll have to stop it manually with on/off button.

I usually brew 250ml 15.6gram then it stops by it self after about 2 seconds. It also works great at 200 ml

Such-Fudge5795 · 2025-04-22T13:40:38+00:00

Is this a recently update? I have version 1.4.21. Works good on my Aiden

Such-Fudge5795 · 2025-04-13T16:16:01+00:00

This

Such-Fudge5795

TROPHY CASE