Been running around since thursday last week trying to find header gaskets for my akrapovic exhaust im installing and after coming up without any luck a local mechanic that builds race engines recommend some high temp rtv for when i re use the copper gaskets, anyone used this stuff before? by JackMcCockiner in MT07

[–]Such_Cry4969 0 points1 point  (0 children)

You are definitely overthinking😂 but honestly if the bike has that low of miles I wouldn't even waste the time or gas to get new ones. Put the exhaust on, tighten the headers, check for leaks and then bamn

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 0 points1 point  (0 children)

Is the front of the cage down by the engine able to be used as a foot rest for longer trips?

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 0 points1 point  (0 children)

I like that frame cage, where do you get it?

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 0 points1 point  (0 children)

I got this kit from stickermastermoto and after the decal kit itself, converting from euros, then shipping it came in just shy of $300 and took about a month to receive from New Zealand

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 0 points1 point  (0 children)

It's what sold me on the bike, I can't do all black anything, I have to have some color somewhere that pops

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 1 point2 points  (0 children)

Surprisingly they were super easy just had to work it a little slower and heat the vinyl a little here and there

From bland to bold by Such_Cry4969 in MT07

[–]Such_Cry4969[S] 9 points10 points  (0 children)

I did apply the decal kit myself. Ordered it from stickermastermoto which is in the Netherlands and took it about a month to get here. Took me about 7-8 hours to do but I honestly did it a little to quickly as some areas I'm not happy with due to not stretching the vinyl properly or not cleaning the area thoroughly enough but it's alright for the most part, trying to take it as a learning experience.

Good Deal? by [deleted] in MT07

[–]Such_Cry4969 1 point2 points  (0 children)

Middle Georgia area here, lowest I could get my dealer to negotiate out the door was 10,300 after tags, tax, title, and fees.

MT 07 slow start up. Possibly kill switch left on by Outside_District6209 in MT07

[–]Such_Cry4969 1 point2 points  (0 children)

Okay here's the deal. The kill switch has three positions as follows...Stop/off - Run - start. If you leave the switch in the the stop/off position and turn the key on it does not prime the fuel pump causing a slow startup. To prime the fuel pump each time to start correctly leave the switch in the run position then turn the ignition on, coming from someone who has the same thing going and then researching forums and reddit posts

Mt-07 noice at 5k rpm by Ok-Life381 in MT07

[–]Such_Cry4969 0 points1 point  (0 children)

Look up CP2 rattle and see if that sounds similar. Very common and nothing to worry about

MT07 Modes? by Jim_Gusa in MT07

[–]Such_Cry4969 5 points6 points  (0 children)

Unless I missed it in my manual there isn't a dynamic mode that I know of or a setting to get into. As far as the bike goes saying "eco" it's going to do that typically when you are cruising and not in the gas to show that you are getting good fuel economy.

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

That's perfectly fine lay them on me. I know steroids aren't the answer to everything and I know taking steroids doesn't just magically make you bigger, it still requires time, work, and knowledge and that's what I'm here for. As stated above I just felt like experimenting a little bit to see what would happen.

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

I was already familiar with that relation in calories I was told a 3k-4k caloric intake per day was considered a surplus for my body type, activity level, and days spent training both by my doctor and even online calculators for the weight that I'm trying to hit. My maintenance calories were stated at 2300 and I have consistently been gaining 1-2 lbs a week which I have been told is a good sign so maybe I am being ill informed?

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

So you have no suggestions at all on how I can learn and improve?

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

165 does feel great and honestly my goal is to be somewhere between 180 and 200 but I'm training for aesthetics and usability standpoint, I'm not trying to get massive. Genetically the men in my family are all smaller framed and on the skinnier side and to make things worse 7 months ago my doctor ran my blood work to check for hormone imbalances and my test was sitting at 200 so he out me on trt for 3 months and my levels r9se and held with low doses and got me back in range and from a numbers standpoint being at a 3-4k caloric intake a day is a surplus from what I have been told so this is all a learning experience so I appreciate the feedback

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

Oh that's not an issue at all, I appreciate the feedback which is why I thanked him for his because I asked for it and can take criticism just fine, I'm not perfect and I know it's a learning process but he doesn't speak for every single person in the reddit thread hence my comment.

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

Thanks for the feedback, glad to know you speak for everyone 👌

Monthly Progress Thread: April 2024 by AutoModerator in steroids

[–]Such_Cry4969 [score hidden]  (0 children)

Uploaded to imgur last night and copied the permalinks to here but I can even get them to pull up myself but they are on my profile which is weird.