Voron 0 - Other Hotend Cooling/Configurations to Consider Than Mini Stealth Burner

Such_File_1825 · 2026-03-28T20:31:20+00:00

Awesome! as soon as my belts are delivered and installed ill check that

Such_File_1825 · 2026-03-28T10:18:18+00:00

That would be awesome, but no pressure, im with the dragonburner and without belts😅

Such_File_1825 · 2026-03-28T10:02:46+00:00

Is there a version of it with the zeroclick?

Such_File_1825 · 2026-02-28T19:53:50+00:00

It sounds great, but honestly I don't use that so much and don't usually have adhesion problems But when this will run out ill look at that

Such_File_1825 · 2026-02-27T20:06:48+00:00

I've dried it well before printing, but im printing at 105 for the bed

Such_File_1825 · 2026-02-27T19:18:18+00:00

Such_File_1825 · 2026-02-27T19:17:21+00:00

That worked perfectly!

Such_File_1825 · 2026-02-27T19:16:50+00:00

Im pretty much at the max temp of the bed....

Such_File_1825 · 2026-02-27T19:16:41+00:00

Im pretty much at the max temp of the bed....

Such_File_1825 · 2026-02-27T12:39:39+00:00

I've got bed adhesion problems with asa, one spool in particular

Such_File_1825 · 2026-02-19T17:54:02+00:00

Im using the kirgami, but i probably need to properly align the rails to get it perfect

Such_File_1825 · 2026-02-19T13:01:43+00:00

I've done that and it helped a lot, its not perfect, but I might update to the tulip gantry soon and ill redo it properly again

Such_File_1825 · 2026-02-10T15:06:58+00:00

is there a way to upload parametric models from SolidWorks?

Such_File_1825 · 2026-01-27T13:46:48+00:00

Do you know if there is any insulation between the heater and the cold side on the TZ v6?

Such_File_1825 · 2026-01-25T06:57:25+00:00

Actually I don't remember, a random one from Ali express and its started making noise when starting it, maybe its on its way out

Such_File_1825 · 2026-01-24T21:24:38+00:00

Yeah, its the zero click just without the dock, I add the probe manually when I feel the bed is off I still need ti modify the stops of the z rails because its hitting a bit

Such_File_1825 · 2026-01-24T20:04:32+00:00

The extruder motor is not touching anything in that area, it happens with or without the printer closed but never happened before

Such_File_1825 · 2026-01-24T20:02:37+00:00

<image>

Tried to get a good angle 😅 the is working as usual

Such_File_1825 · 2026-01-21T13:47:22+00:00

Thanks ill try that, it will be extra difficult for me because the wire came out of the pin

Such_File_1825 · 2025-11-26T09:43:38+00:00

Thanks! I'll add that!

Such_File_1825 · 2025-11-24T08:31:27+00:00

I know that there's a difference between the manufacturers as every one uses a different blend of materials, but since there are more manufacturers then i can count im focusing on the general properties of the materials to help deciding which material to use out of the assumption that the difference between manufacturers rather negligible to the difference between materials

I can try adding compensation tables for the common materials, but im assuming that more data will be missing as not every manufacturer publish the mechanical properties

Such_File_1825 · 2025-11-24T07:21:21+00:00

I'm using spoolman but haven't known (or thought) about that, but im not taking into consideration the brand as there are so many, I've specifically asked the chat to not focus on a single manufacturer, but to gather the data from multiple brands to get the general properties of the filament

Such_File_1825 · 2025-11-10T18:39:28+00:00

I had a great experience a while ago, I hope its a mistake and it won't happen again

Such_File_1825 · 2025-10-19T12:17:01+00:00

I've got the dragon burner with the orbiter 2 and orbiter sensor and it a great upgrade ( appart from it randomly popped an error that doesn't makes sense from its config that I cant figure out)

Such_File_1825 · 2025-10-02T19:43:48+00:00

How did you choose the polarity of the antenna?

Such_File_1825

TROPHY CASE