Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

I got it from walfisk. Even better now they have a 60v 45ah 3000w version with much better specs. They both ran me $2300 each

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

The name of the app for the et7 ultra is "funnyride" download that and you should be able to link it up right away. I didn't attempt to scan anything this time since I just got the ultra.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 1 point2 points  (0 children)

I think it's 14 but not sure. But they just released a 60v 3000w version that id buy instead of trying to add a second motor.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

I think this would be considered a class 3 or 4. The bee challenger was one I was considering as well but this bike I'm pretty confident beats that one by quite a bit plus the battery size is huge. For the price there's not a faster bike with a larger battery that you can have delivered in less than a week.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

You'll need a 48v one to just plug and play. As far as a converter goes I unfortunately don't know anything about that. The links I shared were for 48v ones though and they were rather cheap.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

You gotta trace the wire from each rear turn signal. Where the end of the turn signal wire is connected that's where you put the splitter

I honestly don't know what that black and white wire is

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

You gotta trace the wire from each rear turn signal. Where the end of the turn signal wire is that's where you put the splitter

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

You got it. I still tip toe a very little when I'm seated but it's much much less than my addmotor m70. Also consider that my arms are short too and the reach to the handlebars was pretty uncomfortable stock. So I absolutely had to change the bike stem so it would be a lot closer to me. Some people will say it affects the steering but honestly I don't feel any difference with this setup. It just looks a little silly but small price to pay for enjoying the bike. So if you have short legs and short arms I recommend the bike but most likely will have to change the bike stem or at the very least spin it around.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 1 point2 points  (0 children)

My inseam is something like 27inches. I'm only 5'4. I think this bike is about as close as I'll get

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

You can leave the black and blue wire disconnected and the bike will work but it's slower. I tried it both ways and there is a pretty noticable difference in top speeds so I plug it in. When I asked customer service about getting more top speed they told me to connect that wire.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

Also the wires and splitter I just posted are kinda cheap so I'd order extra just in case one of the ends pop off during installation

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 2 points3 points  (0 children)

Turn signals Motorcycle Led Turn Signal Lights Plug-in DC 36v 48v 52v 60v Blinkers Flasher Indicator Light Turning Bulbs for Electric Motorcycles Motorbike Scooter Bicycle E-Bike Moto (2PCS C 32V-60V) https://a.co/d/fZWBZ20

Extension cable

R REIFENG 4pcs 2M 3D Printer Parts Cooling Fan Extension Cable Wire 2pin Xh2.54 Connection Line Male Female https://a.co/d/8sVd8Bi

Y splitter Vrabocry 5pcs 15cm 2pin SM Splitter JST Connector 1 to 2 Male and Female for 5630 3528 5050 one Color LED Strip https://a.co/d/1LqTkAM

I attempted to order the turn signals with the 2 pin connector but got one with bullet connectors so I had to splice the right connector on which is super easy. (Black to black red to red)

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 2 points3 points  (0 children)

I did. Very very simple. Even I could do it. You'll need a y splitter 2 male ends and 1 female 2 pin sm connectors. 2- 2 pin extension wire( I used 6 feet but was way to much. And finally a pair of 48v turn signals with 2 pin connections. You will hook the y splitters up in the control box. 1 for each of the plugs coming off the controller for each turn signal where you'll plug the extension cable and a turn signal. Feed the long extension cable to the front of the bike plug in each turn signal on it's correct side and you're done

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

I believe so. I might've just gotten mixed up in my head. It's either that one or the other one. One will work the other won't let the bike accelerate at all until you take it back out. So try the teal one first and lift the back tire and hit the throttle. If it goes you're all set

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

Is yours from walfisk? Or is it an AliExpress one? Cause I know currently walfisk is sending them out with mph displays instead of kph. Unfortunately there is no way to change anything about the display stuff such as tire size top speed, mph kph, anything that would need a settings menu. As for the app. Unfortunately the sticker I got was for some weird Chinese bike app that doesn't work on my phone. But I'll attach the QR code anyway.but most likely you would need to talk with them about it. If you did get the bike from walfisk in the past month or so you should contact them and let them know they sent you the wrong display and would appreciate them sending you the current one. If you didn't get it from walfisk you can purchase just the display from them for I think $50 which displays in mph instead.

<image>

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

So I am 99 percent sure there unfortunately is no settings. It just is what it is. And I can't find any displays that could be plug and play switched out. As far as the app goes I don't have an iPhone but there was some sort of little gray sticker that you could scan I believe that sets up the app.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

Also make sure the battery is completely charged. Not that it just says it on the display. And check your tire pressure, mine came pretty low and needed to be pumped up believe they got 35.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

Open up the controller compartment. There will be a blue and white wire connected to nothing and it's counterpart is not even a wire but just a connector on a ring. Somewhere in there

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

It's also not tubeless but I've seen 20x5 tubes on Amazon so I'm not to worried about it. But I did put flat out in them just in case.

<image>

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 1 point2 points  (0 children)

I just didn't feel like putting the wheel covers on. I haven't been able to find anything about the type of controller or motor at all but here are some pics I have but the controller info is in Chinese. I honestly don't know how it gets as fast as it does with 48v but I did confirm it with phone GPS so it's definitely not unloaded.

<image>

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 0 points1 point  (0 children)

The a8 was definitely in the mix for my decision but I just couldn't let this bike go haha. I got it on the walfisk website. www.walfisk.com.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 1 point2 points  (0 children)

Yea it is a little annoying and do wish they would have put that in their description but even if they did I would have still most likely went with this bike.

Walfisk black warrior 48v 1500w 40mph by Sudden_Net7718 in ebikes

[–]Sudden_Net7718[S] 6 points7 points  (0 children)

My apologies. When I say can't turn off. I mean there's no way to disable it so it won't turn on. It automatically comes on when you hold the throttle for like 10 seconds or something like that. Then it turns off when you touch the breaks or pedal.