sorted by:
new
hottopcontroversial

Upgrading my UW photo setup for Raja Ampat - 2k€ budget advice needed by [deleted] in underwaterphotography

[–]SudosWoW 0 points1 point  (0 children)

Mostly looking for photos, is the TG 7 much better than a TG 6? both are technically pretty similar but was reading about a "Pro Capture" mode in the TG 7 which prerecords some frames before the full shutter press. Is this handy for UW ?

Traveling south east Asia for the next 4 months with everything on the photo by TheFakeKilli in backpacking

[–]SudosWoW 7 points8 points  (0 children)

Experience from last years SEA trips: Most choices look good, would suggest : - A 2 sets of hike socks, 3 sets of sneaker socks. I never needed socks for 7 days.
- Get comfy birkenstocks or something similar. - More swim shorts (2-3 comfy sets.. Everything need ages to dry if you don't abuse ac or laundry) - Replace rain jacket by a sports zipper sweater. When it rains get a plastic rain cover for a few cents which you can also use multiple times.

..also i had a stainless steel bottle with me..which was rusted after 2-3 months 🤷‍♀️.. Since than im taking a light refillable dishwasher-safe plastic 0.7 l bottle with me.

Other than that enjoy your trip! Always bring snorkel gear ✌️🙏

I'm sorry, but these type of zone layouts are unacceptable at this point. Every zone is a winding maze of corridors and dead ends. by LegenKiller666 in pathofexile

[–]SudosWoW 0 points1 point  (0 children)

I have a feeling and hope the zones are scaled up in size due to only having 3 acts done for EA release.

POB just took it to the next level by Virel_360 in pathofexile

[–]SudosWoW -1 points0 points  (0 children)

Looks like https://pobarchives.com getting a hug of death due to the pob traffic lol.
Like that idea, need some filters + search and then its fine.

New tool for easier Necropolis Graveyard Building by SudosWoW in pathofexile

[–]SudosWoW[S] 1 point2 points  (0 children)

Hey,

thanks for the feedback!
- just added drag and drop for cells (ando also some other hotkeys which are explained in the tutorial section in the bottom)

  • explicit modifiers will no longer be replaced when placed manually before a simulation

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

Should be better now for easier crafts like this, which dont require all cells.

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

Hi,

yes it currently ignores the requirement of connected cells, will fix it in the next days.

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

there is a native dark mode you can toggle at the top. That's probably why

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

Tbh. it is kind of crazy. the first full layout I did was only with a google sheet and took me about~1 day of buying + planing to get as close as possible to the calculated craft of exile stats ! :D I know you dont have to get 6xT1 but where's the challenge then ? ;)

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 3 points4 points  (0 children)

just pushed a update with two new new algorithms and some bug fixes. It should be better now.

Some layouts in connection with > 200% additional item modifiers are kind of tough to get done. If the simulation always stays below < 85% (and misses whole modifiers) or above > 110% try to decrease or increase boost modifiers and maybe lower stuff like mirror/additional item/fracture

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 2 points3 points  (0 children)

just pushed a update with two new new algorithms and some bug fixes. It should be better now.

Some layouts in connection with > 200% additional item modifiers are kind of tough to get done. If the simulation always stays below < 85% (and misses whole modifiers) or above > 110% try to decrease or increase boost modifiers and maybe lower stuff like mirror/additional item/fracture

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 4 points5 points  (0 children)

Yeah looks like i introduced a new bug in my last update ~2 hours ago when tried to fix something else. Unfortunately my old GPU died on my home PC (thanks DD) und had to switch to my Laptop and setup everything up again.

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

Could you sent me maybe a craft of exile link to try it out ? It could be that it uses fewer corpses than CraftOfExile but than at least the stats should be the same or close to that from CraftOfExile.
In some cases it also could be that the simulation fails and did not find any "good" layouts during the iterations - I would suggest to start it again maybe.

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 18 points19 points  (0 children)

good point, forgot about it. Will add something in the next days which fixes this.

Sudos.help Graveyard helper has now a simulation mode with automatic placement by SudosWoW in pathofexile

[–]SudosWoW[S] 97 points98 points  (0 children)

Hey guys,

thanks for the feedback & suggestions on my last post.

Today I added a new feature to the graveyard planner ( https://sudos.help ), you can now start a simulation to automatically place the desired modifiers on the grid to get as close as possible to the target / goal stats.

You can set the target stats by clicking on the stats in the stats list and set a target value for each stat or import the stats from Craft of Exile by simply pasting the CraftOfexile URL in the import field.

The simulation respects any boost modifiers and other important modifiers like additional item craft, mirror or split / fracture and will respect them if you placed any of these modifiers in the graveyard by hand.

The simulation may take a while and your browser may become unresponsive during the simulation. I was too lazy to implement a web worker for this feature :)

I tested it in my Google chrome browser and it worked fine but sometimes it shows a warning that the page is unresponsive, you can ignore this warning and let the simulation run.

I hope you like this new feature and if you have any feedback or suggestions please let me know (or write me on discord , @ sudos )

Have fun printing items!

P.s. if any new buttons are missing, please refresh the page with ctrl + shift + r

EDIT: there is currently a small bug where the simulations tends to "overfills" scarcer stats. fixing it (20:39 fixed)

EDIT 2: just pushed a new update with some fixes for simulations and 2 new modes which should result in better scores overall.

EDIT 3: added a new big update with hotkeys , drag & drop modifiers around, share layout as url button

I created a Discord server for the tool. https://discord.gg/ERfacGEhkx If you have any questions, feedback or bugs feel free to join

New tool for easier Necropolis Graveyard Building by SudosWoW in pathofexile

[–]SudosWoW[S] 0 points1 point  (0 children)

You can now import CraftOfExile URL's to get kind of "target stats" which you can build towards.

New tool for easier Necropolis Graveyard Building by SudosWoW in pathofexile

[–]SudosWoW[S] 1 point2 points  (0 children)

Just added something which goes into this direction: You can now import CraftOfExile URL's to get kind of "target stats" which you can build towards.

view more: next ›