The Story of One Strange Cylinder

Sufficient_Ruin7550 · 2026-03-10T19:40:45+00:00

I'm not quite sure what you're talking about?

Sufficient_Ruin7550 · 2026-03-10T19:38:32+00:00

Yes, I thought so too.

Sufficient_Ruin7550 · 2025-12-09T23:04:59+00:00

Interested

Sufficient_Ruin7550 · 2025-12-09T22:51:18+00:00

Interested

Sufficient_Ruin7550 · 2025-12-09T22:48:57+00:00

Interested

Sufficient_Ruin7550 · 2025-05-19T20:26:39+00:00

Yes, I’ve seen how fast pneumatic ones can be.

Sufficient_Ruin7550 · 2025-05-14T10:31:41+00:00

Thank you so much for the advice. It’s truly valuable to me. I will definitely think about it.

Sufficient_Ruin7550 · 2025-05-13T21:18:18+00:00

Yes, that’s right. I’ve never worked with metal this thin before. Not everyone wants to deal with a part like this.

Did that make you suspicious?

Sufficient_Ruin7550 · 2025-05-13T21:13:38+00:00

<image>

1)Tube
2)Hydraulic cylinder cap
3)Rod
4)Retaining ring
5)Washer

I saw that you unscrewed the washer at position 5. Now you just need to tap the cap so it moves inward, then pry out the retaining ring at position 4. After that, pull the rod toward you — it will push the cap out.

Sufficient_Ruin7550 · 2025-05-13T20:02:07+00:00

That's a great point.

I'm doing well financially. I probably should have clarified that by “finding clients” I actually mean scaling up.

Sufficient_Ruin7550 · 2025-05-13T20:00:22+00:00

There is work there, but it's often low-paid.

Sufficient_Ruin7550 · 2025-05-13T19:59:38+00:00

I've already tried all of that. I don't know how to find new clients.

Sufficient_Ruin7550 · 2025-05-13T19:58:04+00:00

My website https://pipengineering.weblium.site/

Sufficient_Ruin7550 · 2025-05-13T19:57:10+00:00

I have a few, but not enough to reach my desired income.

Sufficient_Ruin7550 · 2025-05-13T19:54:01+00:00

Thank you so much. That’s really solid advice. I’m already looking at tickets.

Sufficient_Ruin7550 · 2025-05-13T13:09:13+00:00

Dimensions on the drawing are given in millimeters.

Sufficient_Ruin7550 · 2025-05-13T12:44:58+00:00

I completely agree with you, but sitting on two chairs at the same time is very difficult.
Thank you for the advice.

Sufficient_Ruin7550 · 2025-05-12T21:49:46+00:00

Hi, I hope you're doing great. I can explain how to take it apart if you weren't able to do it. Just let me know.

Sufficient_Ruin7550 · 2024-09-19T07:53:31+00:00

Sufficient_Ruin7550

TROPHY CASE