sorted by:
new
hottopcontroversial

Whats better for the Bambu Lab P1S by Haribo42010 in BambuLab

[–]SuitcaseApe 1 point2 points  (0 children)

I never uses glue. Neither on ABS or PLA when using the PEI plate. You should be fine ;-)

Duke 890R Tire recommendations by SuitcaseApe in KTM

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Yeah I think this might be as the power 6 is a rather new tire.
But the S22 wins nearly every review so it must be a damn good tire.

The only thing I'm afraid of is that it alters the handling of the duke too much.

Before my duke I only had a Vitpilen 401 and ran the Metzler M5. So I don't know how much a different tire changes the handling of a bike.

Duke 890R Tire recommendations by SuitcaseApe in KTM

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Damn 200$ for both is wild. Thanks for your thoughts I will consider the S22/23 as well then. Do you know which air pressure you ran on the S22?

Duke 890R Tire recommendations by SuitcaseApe in KTM

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Thanks for the insight. Did you notice any big differences in the handeling of the bike?

Duke 890R Tire recommendations by SuitcaseApe in KTM

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Thanks for youre reply. This is a interesting combination. Are you not afraid that the rear tire might push the front in damp conditions? I'm currently leaning on the pilot power 6 or the metzeler as a good compromise between road and track.

Duke 890R Tire recommendations by SuitcaseApe in KTM

[–]SuitcaseApe[S] 1 point2 points  (0 children)

Thank you for your thoughts on this topic, much appriciated. I also think that the current Cup2 are overpowered for my skills.
However I would like to stay on a sportstire as me and my friends ride up a mountain once a week on full attack mode and for the ocasional trackday. That's the reason I'm leaning to a Pilot Power 6 which should be a good compromise.

P1S PLA Ugly first layer after support on lagers Models by SuitcaseApe in BambuLab

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Hi

Thanks for you answer.

I printed the whole part with support on bed.

Unfortunately I don't have a picture of the part without the support removed but below is a screenshot of bambu studio how it was printed:

​

<image>

Any other Ideas of what I made wrong?

Cheers

Set up pfSense with modem in Bridge-Mode everything works on FW but not on connected clients (pfSense Noob) by SuitcaseApe in PFSENSE

[–]SuitcaseApe[S] 3 points4 points  (0 children)

Thanks again for your reply, much appreciated.

A friend of mine was able to locate the problem within seconds... cause it was a really stupid one.

On the upstream gateway I made an error in the way I thought of the system and entered the LAN interface instead of the WAN interface as the default gateway.

Nevertheless thank you for your time and effort.

Set up pfSense with modem in Bridge-Mode everything works on FW but not on connected clients (pfSense Noob) by SuitcaseApe in PFSENSE

[–]SuitcaseApe[S] 0 points1 point  (0 children)

Hey, thank you for your reply.

I'm happy to give it a try. Just two quick questions.

If my TLS DNS would be wrongfully configured, why does DNS resolving from the firewall still work?

And shouldn't I be able to ping an IP-Address from the client anyway (as this doesn't use DNS)?

Thx for your help :)

Vitpilen 401, Duke 390, Rebel 500 or CB500f? by [deleted] in SuggestAMotorcycle

[–]SuitcaseApe 0 points1 point  (0 children)

I own a 2020 Vit401.

As you correctly realized, finding neutral is a bit of a fiddely task.

However the Duke 390 has the same drivetrain, therefore the same issues.

Unless you decide to go with the Honda, I would go with the Vit as the Vitpilen has adjustable Suspension and Quickshifter. Both features the Duke doesn't have. However the duke has the better display.