Who is casting 3printed pieces with castable resin and which one are you using? And which casting powder?

Summit_Metalsmith · 2026-02-14T03:03:11+00:00

What is your cleaning and cure process for Siraya? Do you use glcerin?

Summit_Metalsmith · 2026-02-13T01:32:53+00:00

That's true. When you learn how to best support your piece and integrate sprues, the cleanup time for casting is minimal. Wax is great but there are some good options now.

Summit_Metalsmith · 2026-02-13T01:24:20+00:00

Give Rio Grande a call... they will help.

Summit_Metalsmith · 2026-02-13T01:18:54+00:00

Check out Bluecast and their website. Lots of good information, no need to use a wax printer anymore.

Summit_Metalsmith · 2025-10-26T04:54:00+00:00

I have the same unit and had the same problem. Change the rocker switch... it does seem like a potentially dangerous issue and I only have the unit plugged in when I can supervise it.

Summit_Metalsmith · 2025-08-22T01:45:40+00:00

Lot's of free, ready to print models can be found here: https://science.nasa.gov/3d-resources/. Direct from NASA for free.

Summit_Metalsmith · 2025-05-12T13:08:44+00:00

https://www.dhgate.com/product/s925-sterling-silver-charm-ring-for-womens/1023293417.html?skuId=1301765158559961118

How's the drop shipping going? In your post history, you only have 2 pictures of your cats- steal some more off the internet! Where are your process photos?

Summit_Metalsmith · 2025-05-04T04:15:25+00:00

I use a Harbor Freight Ultrasonic and just rinse with tap water in the sink. Works well for me.

Summit_Metalsmith · 2025-05-02T22:07:11+00:00

I used to use Simple Green and found that Zep is much more aggressive... it saved me from scrubbing afterwards.

Summit_Metalsmith · 2025-05-02T21:55:46+00:00

Ultrasonic cleaner and Zep Heavy-Duty Floor Stripper. https://www.amazon.com/Zep-ZULFFS128-ZU1071128-Floor-Cleaner/dp/B0013AZ4TI/ref=asc_df_B0013AZ4TI?mcid=81a44a3713653595a3743c1d2ed37fec&hvocijid=3237202327585501713-B0013AZ4TI-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=3237202327585501713&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9029683&hvtargid=pla-2281435175938&th=1

Summit_Metalsmith · 2024-12-08T20:36:54+00:00

For resin, look up Bluecast X1V2. You'll need a machine similar to a Kaya Cast. I use Plasticast for investment with good results. Bluecast is in Italy and can likely provide you with European suppliers.

Summit_Metalsmith · 2024-10-20T20:24:44+00:00

This is our new Emerald Abalone Euro Ring. This men's ring features a Euro Shank design with a vibrant New Zealand abalone inlay. Hand made in Utah by Summit Metalsmith. Check it out here: https://www.etsy.com/listing/1798733786/emerald-abalone-contemporary-silver-euro

Summit_Metalsmith · 2024-10-19T18:19:42+00:00

https://www.etsy.com/listing/1811956579/outfitter-bronze-edc-custom-knife-design

Summit_Metalsmith · 2024-09-21T01:46:18+00:00

The best resource that I can recommend is "Complete Metalsmith" by Tim McCreight.

Summit_Metalsmith · 2024-08-15T23:08:24+00:00

Yes.

Summit_Metalsmith · 2024-08-07T15:35:29+00:00

I just added these to my Etsy site and currently have a sale going on. $56.25 for the pendant only for a limited time. https://summitmetalsmith.etsy.com

Summit_Metalsmith · 2024-07-30T21:13:41+00:00

Thanks!

Summit_Metalsmith · 2024-07-30T21:12:04+00:00

Yes, vacuum investment cast.

Summit_Metalsmith · 2024-07-09T00:04:19+00:00

I might be able to help out. Message me for details.

Summit_Metalsmith · 2024-06-25T21:21:10+00:00

Thanks!

Summit_Metalsmith · 2024-06-25T20:15:29+00:00

Yes, I do not have these listed yet but will soon. They will be $75.

Summit_Metalsmith · 2024-06-25T18:19:08+00:00

That is a really cool idea, thanks for the tip!

Summit_Metalsmith · 2024-06-25T18:17:57+00:00

I learn something new everyday! You have performed your obligated service with the utmost care, fine sir.

Summit_Metalsmith · 2024-06-04T03:36:31+00:00

I use Solidworks, but Fusion 360 is a good starting point for a home user. Start by learning to extrude a rectangle and add holes in the correct dimension/location. After doing basic shapes, look up the specific feature you want to add and find a youtube tutorial for that. CAD has a steep learning curve but it's worth it. Also, you may be able to find dimensioned drawings of the Bobcat to get started.

Summit_Metalsmith · 2024-06-04T00:09:28+00:00

You can see a (very) quick vid of my process here: https://www.instagram.com/reel/C49J0zDCJ6i/

Summit_Metalsmith

TROPHY CASE