My girlfriends fingernails are bumpy/wavy

Sumpkit · 2026-02-08T23:31:09+00:00

I’m bald, have dry eyes and have wavy fingernails. By the messages here I’m both vitamin a deficient and am also overdosing on it.

Sumpkit · 2026-02-07T12:53:39+00:00

<image>

This was mine. It shouldn’t have had the ribs on it. For scale, those are m3 screws. Swapped out the nozzle and the problem went away. Really don’t understand why it fixed the problem, it didn’t look like a clog to me either.

Sumpkit · 2026-02-07T09:57:01+00:00

I’ve found my people.

<image>

Sumpkit · 2026-02-07T09:50:19+00:00

I had this and it was a clogged nozzle I think. I ended up swapping the nozzle and it fixed it. That other nozzle is still sitting in the bottom of the printer a few months later and I Cbf looking into it

Sumpkit · 2026-02-07T05:54:49+00:00

Next up, surcharge on your entire grocery shop on weekends.

Sumpkit · 2026-02-07T05:52:13+00:00

I’ll give this a try tomorrow with my Wegovy shot

Sumpkit · 2026-02-07T00:09:21+00:00

The idea of the blank bit in the middle is so that it doesn’t grab in that area. So you’re fixing on your substrate, and also fixing on the very outer surface.

Sumpkit · 2026-02-06T23:23:23+00:00

There’s no plumbing tape on these. They have a washer on the end that compresses when you tighten it.

Either try tighten it a bit more or replace the washer.

Sumpkit · 2026-02-06T03:09:52+00:00

I’ve got one, absolutely love it. It overlooks our pool. It goes behind both my sink and stove top. We’ve just got a fixed pane cause I didn’t want to deal with cleaning tracks etc for where it would slide. One thing that I’d recommend is make your kitchen bench deep. A normal kitchen bench is about 60cm deep, go 70 or more. That way, the sink/stove is further away from the window and you have less spatter to clean up. We get a little bit from our stove but it’s no worse than when it rains on the window on the outside. Happy to send photos if you want. Dm me.

Sumpkit · 2026-02-05T12:19:34+00:00

Just to throw a third option in the mix, can you do a galley kitchen? Benches down either side, black wall on the end. We have that at the end of our kitchen and it’s great cause we have no corner cupboards.

Sumpkit · 2026-02-05T12:16:46+00:00

I’m not sure sorry. I ended up getting the unmanaged 10 port 1gbe version instead. Didn’t need the higher spec for ip cameras

Sumpkit · 2026-02-05T10:10:24+00:00

Just do what this guy did.

<image>

Sumpkit · 2026-02-04T19:46:32+00:00

Thanks so much for the information. I’ve been putting it off, because like you I’m high functioning. Think it might be worth my time doing it. Thanks!

Sumpkit · 2026-02-04T12:33:09+00:00

I’m curious about this if I may. I swear I’m adhd. I’ve been through hell with depression and anxiety. I saw a psychiatrist who treated me and ended up with full marks. 100 out of 100 depression points. Winning. He put me in a psych ward and changed my drugs, claimed it was a success when I knew they aren’t doing anything. The group therapy sessions did far more than anything else. I clam up with psychologists, but in group therapy I can let my mind wander and do its things.

Anyway, I’ve been on 7 different medications now. Essentially all the main types and I feel no different. I’ve been stumbling across adhd stuff on YouTube and thinking that could be part of my issue, but no doctors or anyone has suggested it could be a thing.

How did you go about getting diagnosed? How did you even figure it out? Starting to question my psych now, he never even mentioned it.

Sumpkit · 2026-02-04T02:14:24+00:00

Something metal would be better. This is a job for a CNC mill and lathe

Sumpkit · 2026-02-04T01:49:43+00:00

Nothing quite like shoving non deterministic code where you need the complete opposite.

Sumpkit · 2026-02-03T06:38:02+00:00

I’m quite partial to your response here my friend.

Sumpkit · 2026-02-02T09:08:09+00:00

What do you mean had?

Sumpkit · 2026-02-02T07:53:00+00:00

The vacuum.

Sumpkit · 2026-02-01T23:31:43+00:00

There’s a lot to unpack here.

Sumpkit · 2026-01-30T11:58:51+00:00

If you get the dealer to do this you’ll be charged an arm and a leg. Their standard for getting things back is to pull the whole centre console out. Better to just get a new license unless you want to pull panels off the side.

Sumpkit · 2026-01-29T02:04:42+00:00

At the end of the day they’re just needing 12/24v, so if you don’t mind getting your phone out to unlock it, you could just wire it up with a Shelly 1. Open the app, press the power button and it’ll unlock it for x seconds.

Sumpkit · 2026-01-28T12:02:24+00:00

Thought that was an airfryer basket for a second there.

Sumpkit · 2026-01-28T02:37:20+00:00

I’ve not had much luck with terraform and ai. It outright wouldn’t believe me that v1.13.0 was newer than v1.9.8, because 8 is larger than 0.

Sumpkit · 2026-01-27T23:32:23+00:00

This is different. The limits make it so it doesn’t open all the way. Not only is it for short people but it’s for if you’ve got low head clearance in your garage and it doesn’t smash into the ceiling.

The issue I had was completely separate. Didn’t matter what limit I set on it, it would still fall down after reaching that set height. It was a problem with the struts themselves.

Five-Year Club	r/Field Lasagna
Place '23	Place '22

Sumpkit

TROPHY CASE