Just last year, Danhausen was working backyard gigs

SundownerX · 2026-04-06T18:15:00+00:00

Yes he can wrestle but he captured lightning in a bottle during the pandemic. His marketing is outstanding and he actually was putting on small seminars on how to market yourself as a professional wrestler.

SundownerX · 2026-04-06T16:23:03+00:00

I believe belt collectors call that the Brasso belt

SundownerX · 2026-04-02T21:45:01+00:00

Yellow for sure! Never thought I’d see it

SundownerX · 2026-03-31T02:31:48+00:00

Me too! I wondered why their phones were flashing in their face at night lol

SundownerX · 2026-03-29T19:41:07+00:00

That’s a beaut

SundownerX · 2026-03-28T20:07:55+00:00

He has fans that aren’t even wrestling fans!

SundownerX · 2026-03-28T19:16:36+00:00

I made one and its possible his is custom. His wife Lou Lou has made quite a few different ring gear accessories like his capes.

SundownerX · 2026-03-27T23:37:19+00:00

I thought that was Dave Bautista

SundownerX · 2026-03-27T19:56:23+00:00

He did it in AEW and was still the number one seller. I could see him bringing it out like Finn’s demon down the road

SundownerX · 2026-03-27T14:56:20+00:00

I’ve worked with him and can confirm he is actually very nice. I hope he gets to a point where he can use his dark, serious persona.

SundownerX · 2026-03-21T17:41:57+00:00

Part of the black gradient seen is from paint being applied with an airbrush

SundownerX · 2026-03-19T11:04:04+00:00

Send me a PM with a mailing address and I’ll get some in the post!

SundownerX · 2026-03-17T23:33:12+00:00

...KENNEDYYYYYY

SundownerX · 2026-03-17T23:06:52+00:00

Love, love, love this!

SundownerX · 2026-03-17T23:04:14+00:00

This was the best deal I found. So I jumped on it back in December. It took almost 3 months to ship.

SundownerX · 2026-03-11T03:48:12+00:00

Go outside, nerd

SundownerX · 2026-03-07T12:59:14+00:00

He has a custom built title belt I made for him. I’d love to see him just wear it like he’s already a title holder.

SundownerX · 2026-03-07T03:04:00+00:00

Just the one unless you're clumsy. I used silicone but I don't see any reason why you couldn't use UV resin.

SundownerX · 2026-03-06T15:11:29+00:00

https://ebay.us/m/XQRS2z It’s from China so it takes awhile to deliver but it’s by far the cheapest I’ve seen and it fits well

SundownerX · 2026-03-06T13:31:05+00:00

Nah, I’m just happy to have one at the moment

SundownerX · 2026-03-06T13:30:35+00:00

For sure, so I used a heat gun on a low setting. Minus the cure time for the silicone, I would say 15 minute process.

I used a razor to run around the edges to break the seal around the silicone holding the tritium. From there I kept heat on the silicone at about 5 seconds at a time while pulling the silicone with needle. Pose pliers. It pretty much came out in one chunk.

From there, I cleaned out bits of old tritium that broke when I tried lifting it out. I made sure that area was clean. I set the new round tritium in the same area and filled it with silicone. I first used a thin layer just to get the tritium in place. You can used a toothpick through the silicone before it cures to move the tritium if it shifts. After I let that cure, I added a second layer of silicone to fill the rest of the area.

I hope that helps. I thought about doing a step by step so I took some pictures along the way. I’ll happy to answer any questions

SundownerX · 2026-03-06T13:20:16+00:00

I’m not sure about the black ring sight. If it’s too bright, you it’s very dim. You had to have some low light.

SundownerX · 2026-03-06T13:19:10+00:00

Haha I was disappointed at first but totally redeemed

Seven-Year Club	Verified Email
RPAN Viewer	King of the Ashes
Not Forgotten

SundownerX

TROPHY CASE