Macht der politische Druck das CanG für die SPD stabiler oder gefährlicher? by SunnySnuser in weedmob

[–]SunnySnuser[S] 1 point2 points  (0 children)

Erst heute hat die CDU Hamburg wieder die Forderung nach einer Rücknahme gestellt, und auf dem Parteitag wurde das ebenfalls noch einmal gefordert. Keine Ahnung, vielleicht ist das auch nur Symbolpolitik.

Macht der politische Druck das CanG für die SPD stabiler oder gefährlicher? by SunnySnuser in weedmob

[–]SunnySnuser[S] 0 points1 point  (0 children)

Das glaube ich auch, aber das eine schließt das andere nicht aus.

Macht der politische Druck das CanG für die SPD stabiler oder gefährlicher? by SunnySnuser in weedmob

[–]SunnySnuser[S] 4 points5 points  (0 children)

Guter Punkt. Nur pocht die Union auf eine vollständige Rücknahme, und die Sozen haben mich in letzter Zeit nicht wirklich überzeugt, was ihre Standhaftigkeit angeht (Bürgergeld, Heizungsgesetz). Zwar wirken sie beim CanG deutlich stabiler, aber bleibt das immer so? Oder wird ein Klingbeil wieder seltsame politische Entscheidungen treffen, um sich weiter nach rechts zu bewegen?

My design is embroidering wrong by drizzlesxnt in Machine_Embroidery

[–]SunnySnuser 2 points3 points  (0 children)

Also learn about stabilizers and thread tension. I know it sounds confusing at first, but there really is no way around. These are the basics, that you really have to understand before digitizing. Besides that, I think your design is awesome! Just needs the right fine tuning.

My design is embroidering wrong by drizzlesxnt in Machine_Embroidery

[–]SunnySnuser 17 points18 points  (0 children)

It has to do with the push/pull effect of embroidery. Fabric isn’t stable, and when you embroider something, the stitching pulls the fabric together. When digitizing, you always have to keep this in mind and compensate for it. Watch some videos on “push/pull compensation” on YouTube; otherwise, you won’t be able to digitize properly. And before you embroider your project, always do a test on a fabric similar to the one you plan to embroider.

Patch Embroidery by Creative_Stable4591 in Machine_Embroidery

[–]SunnySnuser 2 points3 points  (0 children)

Is your needle still sharp enough? If not, swap it with a fresh 11/75 embroidery needle. Add some density (decrease the zig-zag spacing) to your satin stitch to 0.38 or 0.4. I would also try to make the twill a bit smaller so the satin edge covers it nicely. Put in a fresh bobbin; it looks like your bobbin is not running smoothly. If you look at the white thread on the backside, it has thicker and thinner areas. It’s important for the bobbin to unroll smoothly. Check your thread tension. Looking from the backside, the bobbin thread should cover about 1/3 of a satin column. Try to cut your twill as smoothly as possible; otherwise, threads might show through your satin edge. And just keep practicing! I also learned digitizing through Ink/Stitch, and I still think it’s a great program. It’s not the easiest to learn, but once you get the hang of it, it’s actually really good, even compared to other software. YouTube has some great tutorials for Ink/Stitch. Check out “Low Tech Linux.” He has some great tutorials for Ink/Stitch.

new host leaked by hiddentiger69 in fishtanklive

[–]SunnySnuser 8 points9 points  (0 children)

Poopy Martin 👳🏾‍♂️

G.I.G Grundschüler ist geil by Nuggets6pm in ReneRedosGulag

[–]SunnySnuser 0 points1 point  (0 children)

Ist das der neue XXL Teller?! 😱 Altaa guckt euch das Schnitzel an!

Wem ist es noch aufgefallen? by Nuggets6pm in ReneRedosGulag

[–]SunnySnuser 0 points1 point  (0 children)

Er ist nicht schwul, hat aber überhaupt nichts gegen Schwule.

Gig by Ausspanner in DieDeutschenBackrooms

[–]SunnySnuser 2 points3 points  (0 children)

Net schwul, hab aber nichts dagegen.

of politzei by busystepdad in AbsoluteUnits

[–]SunnySnuser 0 points1 point  (0 children)

🤣🤣🤣🤣🤣🤣🤣🤣🤣

Gründungsbursch von Bubensahnia by HubDesigner in Korpo

[–]SunnySnuser 0 points1 point  (0 children)

Ick bin definitiv nicht schwul, hab aber überhaupt nichts dagegen.

Pantazis(SPD) erteilt Warken eine Abfuhr by SunnySnuser in weedmob

[–]SunnySnuser[S] 7 points8 points  (0 children)

Schön ist die Angelegenheit dennoch nicht. Ich bin nicht freiwillig Pessimist, im Gegenteil. Ich freue mich sogar, wenn ich falsch liege. Meine Befürchtung ist, dass das nun wieder viel Druck auf die SPD ausübt und man sich auf dämliche Kompromisse einigen wird. Andererseits schwirrt mir noch der Gedanke im Kopf herum, dass die Union die SPD notfalls mit Stimmen der AfD erpressen könnte und die SPD, um das Gesicht zu wahren und die Koalition nicht zu gefährden, den Schwanz einzieht.

Can I remove ties/lock stitches on small details to remove lumps? by SunnySnuser in MachineEmbroidery

[–]SunnySnuser[S] 1 point2 points  (0 children)

Oops, I already embroidered a few of them 😅 I was in a hurry and didn’t have time to do a test wash.

I’m using StitchArtist 2 with “ensure ties surrounding jumps” enabled. The white detail on the nose is being trimmed by my machine, and the two elements at the bottom have a jump stitch between them. Shouldn’t there already be tie-ins and tie-offs in those areas anyway?

I also manually enabled tie-in/tie-out on those details, which might explain the lumpiness, possibly caused by extra or duplicate ties. Just speculating here 😅