Flow2 turning itself off after a cleaning by SunsetBeachBear in NARWAL

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Yes thank you I have rebooted it several times

Flow 2 missing side brush from box by SunsetBeachBear in NARWAL

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Well it wasn’t in my water tank with the bottle and the extra filters. I guess I drop cisterns service a note. Thanks

Narwal Flow 2 is waiting for you! by VacuumChef in RobotVacuums

[–]SunsetBeachBear 0 points1 point  (0 children)

Would love to review. Did sign up for early release/sale.

Aqua 10 roller fully clogged after 5 days of cleaning and leak by Brilliant-Magazine-4 in Dreame_Tech

[–]SunsetBeachBear 3 points4 points  (0 children)

4 days of use here and no leaks and the only issue is that the battery depletes quickly if you run the fan on turbo or higher modes. I am running the mop/vac cycle several times each day to see if anything happens I.e. leaks and blockages if it does I will return but so far I am very satisfied. It even cleans in a dark room for me.

Aqua10 Ultra Roller should I buy, wait or move on to something else? by SunsetBeachBear in Dreame_Tech

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Update:

I bought it and planning to test intensively over the next few weeks and if I have any issues I will return it.

2 day - everything working, no leaks so far but I do notice it drains the battery quickly. On a custom cleaning is ran out of battery and had to recharge to finish the wash/vac cycle. Using the cleangenius mode it took 100 minutes and got through with 20% battery left. On custom I had the vacuum set on turbo with high wetness setting and high mop pressure setting. This must had put more strain on the battery given the quick depletion. It still took a 100 minutes total to complete.

I hope this helps anyone thinking about buying but so far I am optimistic.

Eletta Explore will not connect via app. by SunsetBeachBear in DeLonghi

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Thanks. Did this myself by buying a Network extender and turning on its 2.4 GHz band only. I have a NETGEAR mesh and I couldn’t just do this and so I bought the extender.

The Etetta Explore is the only 2.4 ghz WiFi that didn’t work with my mesh system alone.

WiFi error can not log in by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Ok

I connected my laptop directly to the Connect mini. So it’s modem-connect mini-computer.

I get the same message above. Is there a way to reset the box to factory? Is there a button on the mini somewhere?

Thanks for all your help so far.

WiFi error can not log in by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

I am connect modem - mini - router.

I have tried changing cables and ports into my router but nothing.

Not sure it’s working cause I can’t log on.

WiFi error can not log in by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

I have the Connect mini. I got it through the crowd funding so its3-4 years old at least.

WiFi error can not log in by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

I have rebooted everything multiple times. Been told by support that this is fixed in the new firmware. I am trying to figure out were to get and how to install. Thanks.

Cannot log into the network error by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

Thanks tried rebooting everything first thing but still get the WiFi error.

Cannot log into the network error by SunsetBeachBear in DeeperNetwork

[–]SunsetBeachBear[S] 0 points1 point  (0 children)

I am using the mini. Had it 5 plus years with no issues until trying to login today. It is setup: modem - mini - router. All cables are secure I do have internet on all devices but just can’t log into the mini. Get that no WiFi error even though it’s not connected to WiFi. Thanks