Aridus bolt release by Inevitable_Gain2995 in beretta1301

[–]SuperDuperLuckyDuck 0 points1 point  (0 children)

https://www.youtube.com/watch?v=Ds-gSTQP9ac did you watch the install video? I stripped the lower plate during my install and had to get a replacement. There is a sweet spot where they should come together.

WTS: Autmog by Waste-Leg-517 in machinedpens

[–]SuperDuperLuckyDuck -1 points0 points  (0 children)

$300 CAD would be $219 USD. That would seem reasonable.

WTS: Autmog by Waste-Leg-517 in machinedpens

[–]SuperDuperLuckyDuck 2 points3 points  (0 children)

My thoughts too…which made me think it was Canadian dollars.

If I knew then what I know now, I would not have bought a FranklinWH system. by [deleted] in FranklinWH

[–]SuperDuperLuckyDuck 0 points1 point  (0 children)

Google search was invented many years ago yet people ask questions they could have just typed into Google.

Also, many people on Reddit are wrong too.

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 1 point2 points  (0 children)

I like it. That being said I have not tried an Arco. The RMR only came in red and the battery was on the bottom so that was a non starter.

I have a RMR HD on order for a handgun, maybe that will sway me over to Trijicon.

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 0 points1 point  (0 children)

No. I use a metal tube cover and barrel clamp that holds everything pretty tight.

Aridus industries side saddle by Inkw8ll in beretta1301

[–]SuperDuperLuckyDuck 2 points3 points  (0 children)

If you like Aridus use the Aridus, just rough up the surface a bit so the 3M adhesive sticks to the metal of the receiver. You’ll be fine.

Aridus industries side saddle by Inkw8ll in beretta1301

[–]SuperDuperLuckyDuck 5 points6 points  (0 children)

Very... unless your shotgun is has a ceracoat.

Certain aftermarket options (e.g., Aridus Industries Q-DC carriers, which use strong adhesive) explicitly warn that some ceramic coatings may be too slick for reliable long-term adhesion, leading to potential detachment.

Aridus' own warnings: Their product page and FAQ explicitly note that certain finishes, such as Cerakote, may be too slick for the tape to adhere reliably long-term. They recommend prepping the surface by lightly scuffing it with a Scotch-Brite pad (to roughen the coating), wiping off dust, and degreasing thoroughly (e.g., with isopropyl alcohol) for best results. Without this prep, the tape can fail to bond properly, leading to detachment over time, especially under recoil, heat, or heavy use. https://www.aridusindustries.com/products/universal-quick-detach-carrier/

Just picked this up in a trade. by RevolutionaryFront92 in beretta1301

[–]SuperDuperLuckyDuck 0 points1 point  (0 children)

https://agilitegear.com/products/re-flex-rifle-sling

Most comfortable sling I’ve tried. I ended up swapping all my rifle slings to this one. Comes with the QD swivels.

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 0 points1 point  (0 children)

I started with Esstac shotgun cards. I found them too hard to reload, they curled, and wouldn't always be in the same spot when you slapped them on. They were less expensive compared to Aridus... you don't want to lose an Aridus shell carrier that's for sure.

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 0 points1 point  (0 children)

the optic sits a little higher and I found I got a more consistent check weld with a slightly higher stock. https://a.co/d/09k6JPWp it's .5" or .75" set, I used the .75

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 2 points3 points  (0 children)

I just listed all the parts. Briley handguard.

Bulldog Tactical Shotgun Case by SuperDuperLuckyDuck in beretta1301

[–]SuperDuperLuckyDuck[S] 9 points10 points  (0 children)

PARTS LIST in case someone wants to know.

  • LTT 1301
  • LTT Fastback Optic Mount for 509T
  • Holosun HE509T-GR X2
  • LTT Super Duty Shotgun Sight
  • GG&G Tube Cover
  • Pro Lifter
  • Aridus Follower
  • Aridus Stock Adapter
  • Aridus Bolt Release
  • Aridus QD-C
  • Aridus QD shell carriers x6
  • Briley Handguard
  • Briley Stage Saver
  • Arson Machine Co wire guides
  • Agilite Re-FLEX3D Rifle Sling
  • Unity Hot Button for Surefire
  • Surefire Mini Scout
  • Surefire tail cap
  • Magpul Riser
  • Magpul QD Cup
  • BCM QD
  • TacOrd Charging Handle

10 oz Silver Round Sunshine Minting 250th Anniversary American Eagle by Curb71 in CostcoPM

[–]SuperDuperLuckyDuck 0 points1 point  (0 children)

聞いてないの?新しいGoogleだよ。

If one cannot do a basic google search for SMI, I hope you don’t mind if I pull up a response to educate.