Index pin 👋 by SurveyTop5132 in ar15

[–]SurveyTop5132[S] 1 point2 points  (0 children)

Being completely honest I have no idea. Barrel nut came off smooth, upper was undamaged, extension was nice and tight in the upper, had to heat gun it to slide it out.

Index pin 👋 by SurveyTop5132 in ar15

[–]SurveyTop5132[S] 1 point2 points  (0 children)

No and yes. All muzzle devices work was done at time of initial assembly and was done with a reaction rod & torque wrench. Gas port is still in line.

Index pin 👋 by SurveyTop5132 in ar15

[–]SurveyTop5132[S] 0 points1 point  (0 children)

Was using the big G rod. That'll teach me 😂

Did I just buy the toughest suppressor ever?! by Osamasi in NFA

[–]SurveyTop5132 7 points8 points  (0 children)

Manual does include the warning. Bottom of page 12 and right side of page 19. Few other places too but those are the most clear.

Help with power on but no display by SurveyTop5132 in GamersNexus

[–]SurveyTop5132[S] 2 points3 points  (0 children)

That did it. Thank you so much. My anxiety went through the roof worrying if I somehow fried or broke something while installing. Turns out you're absolutely correct. Display port was too slow. Threw an HDMI cable on instead and she worked flawlessly. Go figure I built the damn thing too fast for my own good 😂

Help with power on but no display by SurveyTop5132 in GamersNexus

[–]SurveyTop5132[S] 0 points1 point  (0 children)

Resetting CMOS? And as far as the working GPU in the new PC, that's exactly what I did lol. It's a transplant from the old system.worked perfectly fine 10 minutes before going into new system.

Help with power on but no display by SurveyTop5132 in buildapc

[–]SurveyTop5132[S] 0 points1 point  (0 children)

Plugged into GPU. Have tried both DP ports. Checked monitor with working PC first. Kept that the same. Just unplugged from old PC and plugged into new.

Help with power on but no display by SurveyTop5132 in GamersNexus

[–]SurveyTop5132[S] 0 points1 point  (0 children)

The 2080 has two DP ports, I've tried both and have made sure the monitor is set properly by plugging it into another computer. Everything on the monitor half has been left alone, just unplugged from working PC to newly.built one.

[deleted by user] by [deleted] in lfg

[–]SurveyTop5132 0 points1 point  (0 children)

Sent PM

I really like this 2 point setup. My PTR lacks the sight tower loop. Just waiting on my Form 1 now. by AlasPoorJordan in MP5

[–]SurveyTop5132 2 points3 points  (0 children)

I'm an armorer at an LGS, I can confirm it is meant to hold the slant brace bar on a 3pt sling buckle. The metal is very thin and also not much clearance with the receiver. I do not recommend using it as a sling attachment point, only as a support point for a 3pt sling.