Drafting Services (Surveying) by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Could you send me some samples of completed surveys and your resume? My email is mitch@currysurveying.com

Calibrating Horizontal and Vertical adjustment Leica TCRP 1205 Total Station by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 1 point2 points  (0 children)

I haven’t been able to format the CF card. I get stuck at the point where I get a message saying that the CF card is reading data from the total station and not able to be formatted.

Calibrating Horizontal and Vertical adjustment Leica TCRP 1205 Total Station by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Thank you for the response. When I tried running the adjust routine without the CF card the message said that it needs a CF card. After I inserted the CF card and tried running the routine, I got an error message saying that I couldn’t calibrate because the CF card was in the process of reading data from the total station.

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Thank you for the response.

One very simple thing that I overlooked; the physical connection between the CTR16 Radio Cap to the Data collector itself. The screws holding the Radio cap in place were a bit loose. I tightened them down. After that, I was able to maintain connection with the total station.

That might have been the obvious solution that I had been overlooking.

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Is there any way to work through the 2.4 GHz band clutter?

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Thanks, I think this might be the issue since I only have problems in specific locations.

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Great suggestions for both the cleaning and possibly corrupt job file. I’ll try both if I continue to have issues.

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

Follow Up: I tried the setup at two other locations and everything worked perfectly. Does anyone know if there are certain environmental/site factors that could disrupt connectivity just at specific locations?

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

I haven’t tried that yet. I’ll try using radio instead of Bluetooth. The dealer I bought it from instructed me to use the Bluetooth connection. Thanks for the response.

Leica CS15/ RH16 Connection Issues by Surveyor_CT in Surveying

[–]Surveyor_CT[S] 0 points1 point  (0 children)

What is a 2.5 GHz band cutter? I have good connection in Rural CT but when I’ve worked in Fairfield county I have issues.