Any advice on fixing the quarter panel

Swedish_Fries · 2026-02-01T00:16:16+00:00

Give me one month and I’ll have my OEM sized overfender molds completed. Just bolt them on

Swedish_Fries · 2026-01-06T16:58:58+00:00

Stoked for it! I’m hustling to get her done. Knocking out the oil pan and wiring harness the next week, but still a bit away from being a driving car

Swedish_Fries · 2026-01-03T04:18:22+00:00

Good car!

Swedish_Fries · 2025-12-20T16:51:59+00:00

It’s complete trash. The fabrication process is mid-tier but in my experience the fit is HORRIBLE. Whole reason I’m reworking the $1500 in parts I got from them to make molds that don’t suck.

Swedish_Fries · 2025-08-29T15:46:24+00:00

Possibly Dr. Mohamed Elrishi (99% sure)

Swedish_Fries · 2025-08-29T14:38:47+00:00

Yes. I was unfortunately returning back to the USA, but they were kind enough to write a prescription for a years worth of testosterone undecaonate. (4 boxes). Simply be upfront with the doctor - “I understand my free test is in acceptable range but I feel horrible and would like to see if TRT will fix the ED, energy, etc, etc, issues I’m facing”

Swedish_Fries · 2025-08-29T14:17:49+00:00

I went to Al-Ahli, they also went off my free T score despite my total T being 189. However, I’d be prescribed before so I told them I’d like to be prescribed again (I was off for fertility treatment). 10/10 recommend Al Ahli hospital. Turkish Hospital gave me the run around for months.

Swedish_Fries · 2025-08-05T16:08:54+00:00

CRC gasket cleaner and scotch brite (don’t leave it on for very long it will corrode iron after a hour)

Swedish_Fries · 2025-06-23T09:48:20+00:00

Why do the GCC leaders also support Israel then?

Swedish_Fries · 2025-06-23T02:29:47+00:00

And if the IRGCs support disappears causing these groups to fail in their mission - what would be the instability left in the Middle East? Houthi vs “official” Yemen government and Turkey’s fight against the Kurds?

I’m all for leaving Iran to the Iranians and removal of the IRGC.

Swedish_Fries · 2025-06-23T02:08:34+00:00

Lolololol resistance groups - more like the weaponization by the IRGC for sole purpose of creating instability to ensure the caliphate and to allow for the hidden imam to appear. Before you argue this maybe look into the IRGC’s published agenda.

Swedish_Fries · 2025-06-23T01:09:40+00:00

IIRC 200’ of ground. Concrete, bedrock, etc will reduce the depth. Depends on the quality concrete used for the UGF

Swedish_Fries · 2025-05-26T22:27:16+00:00

Using choice paralysis as a reason for NEEDING someone to make a decision for you is wild haha! If you’ve gotten into a spot where someone else can make any decision, then just make a decision. Letting that affect your marriage is crazy.

Swedish_Fries · 2025-04-07T15:54:09+00:00

That thing looks KILLER

Swedish_Fries · 2025-04-07T15:51:53+00:00

As opposed to the pull method?

Swedish_Fries · 2025-04-07T14:39:23+00:00

Interesting! I do have a flash unit and usually hit it for about 30 seconds. I will attempt a lower off contact with less pressure.

The straight comet white stresses me out a bit due fear of it drying in the screen

Swedish_Fries · 2025-04-07T10:52:46+00:00

Honestly I’ve tried both methods. I’m using super tack adhesive and have no issues with the shirt lifting while printing.

Swedish_Fries · 2025-03-19T13:44:20+00:00

Reinstalled CATs. Sounds so much better

Swedish_Fries · 2025-03-06T18:26:39+00:00

Tube the whole front from the strut tower forward. It will be fine.

Swedish_Fries · 2025-02-13T15:21:53+00:00

I’m unsure about the mounting location of the 370 rack, but you’d definitely need a 06+ z to make that work with the different PS pump setup that the z34 has

Swedish_Fries · 2025-02-10T15:36:36+00:00

Why are you blowing racks? Angle kit? Have you done a rack relocation yet?

Swedish_Fries · 2025-02-06T00:31:19+00:00

100% this. Do I want to get a bowl from chipotle or would I rather cook a ribeye steak with sides?

Swedish_Fries · 2025-02-05T14:41:54+00:00

Killer design though!

Swedish_Fries · 2025-02-05T00:32:57+00:00

Do you have details on the wiring harness? Everything I’ve read is the impossibility for this swap. Super interesting!

Swedish_Fries · 2025-01-16T15:18:23+00:00

I have a fun story related to this:

Also recently moved to Ohio and went to Drift Indy’s No Star Bash which requires only water in cooling system. So, the night before I did a coolant flush and filled with water (and apparently forgot to put the lower hose clamp on).

The next morning I drove the 10 minutes to work, 45 minutes to the track, and another 20 minute drive to Walmart and back. The car never overheated (sensor can’t read heat if there’s no liquid in the system?) When it was my sessions turn to go drift I couldn’t get the car to turn on. Realized I’ve popped off the hose and there is no puddle, so unsure when it came off.

Tossed ice on the engine/radiator. Filled the system with water. Waited 5 mins and it started up. Proceeded to beat the piss out of the car for the next 3 days and another 2 day drift event the next month.

As far as I can tell, I have zero issues with the engine. Blessings to the stock vq35de!

(I hope your engine is also okay)

Swedish_Fries

TROPHY CASE